• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.631-636
• /
• 1991

In vector control of induction motor, to improve stability of system generated by load and disturbance have used the speed controller, however this regulator is unquestionably the most common PI controller. If it is tuned, it's performance become sactisfactory. In spite of this, in system requiring more complete control algorithms, the ability of controller is losed totally. Therefore, in this system, it is requiring to tune controller and to design more complex regulator. It may also be costly and time consuming to tune such regulator. This paper proposes in vector control that implement more complete speed control using adaptive IP controller.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.296-297
• /
• 2011

Many applications involving induction motors that are controlled using variable frequency drives require the ability to stop quickly. These applications include emergency stops, quick stopping of fans, centrifuges, presses, etc. The technique that is widely accepted in the industry for achieving quick stopping makes use of brake resistors in series with a power semiconductor switch. The switch-resistor combination (brake-unit) is applied across the dc bus. The fastest decelerating time achievable depends on the size of the resistors and the switch employed. In this paper, the authors propose a novel method of achieving quick stopping times without the use of any brake-unit. Experimental test results with and without this method on a large inertia motor-load combination show that the proposed stopping method is able to reduce the stopping time significantly compared to normal decelerated stop without the need for a braking unit.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.77-84
• /
• 2014

The worm gear is used in the motor drive system of automotive CVVL because of its compactness and self-locking ability. A ZK worm and an involute helical gear can be meshed in order to reduce production cost. However, the gearing is not suitable for the reliability and the NVH problem. To improve the dynamic performances, an optimal design process is considered. The transmission error is calculated theoretically and minimized with the several gear design parameters. An inequality condition such as the teeth interference elimination is added.

• International Journal of Automotive Technology
• /
• v.5 no.3
• /
• pp.201-208
• /
• 2004

Response characteristics of the CVT system for a parallel hybrid electric vehicle (HEV) are investigated. From the experiment, CVT ratio control algorithm for the optimal engine operation is obtained. To investigate the effect of the CVT system dynamic characteristics on the HEV performance, a hardware in the loop simulation (HILS) is performed. In the HILS, hardwares of the CVT belt-pulley and hydraulic control valves are used. It is found that the engine performance by the open loop CVT ratio control shows some deviation from the OOL in spite of the RCVs open loop control ability. To improve the engine performance, a closed loop control of the CVT ratio is proposed with variable control gains depending on the shift direction and the CVT speed ratio range by considering the nonlinear characteristics of the RCV and CVT belt-pulley dynamics. The HILS results show that the engine performance is improved by the closed loop control showing the operation trajectory close to the OOL.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.831-833
• /
• 2001

Line-start motor has ability to start itself without using other methods, so, it is important to predict starting performance accurately. In this paper, the starting characteristics of single-phase capacitor-start, capacitor-run line-start motor was calculated by combination of d-q axis voltage equations and mechanical dynamic equations. D-q axis inductances of this machine varied with current phase angle and amplitude are considered. The validity of analysis method verified by comparing to test results.

• New & Renewable Energy
• /
• v.1 no.4 s.4
• /
• pp.55-59
• /
• 2005

In this paper, a new drive system(SHS) for hybrid electric vehicle is proposed. As dual rotor hybrid electric vehicle using planetary gearsets, the SHS has the advantages of both series and parallel systems. The output speed and torque of SHS can be determined at specific point regardless of the engine's operating point. When the size of generator which is used in SHS is same as in THS, the SHS has more activities of engine control due to the ability that is operated in lower speed range. To maximize the performance of system, we carried out optimization for the three parameters that are engine, motorl and motor2. As the result of the optimization, we confirmed the SHS is more preferable to THS in fuel consumption and acceleration area.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.631-632
• /
• 2006

This paper is written by research for the transient characteristics of the Single-phase Line-start permanent Magnet. The Single-phase Line-start permanent Magnet is most likely to substitute for Single-phase Induction Motor which is used about many appliance currently, because that has good points. For example, It has a Line-start of ability and a High-efficiency. And it need not power convergence device. The rotor of The Single-phase Line-start permanent Magnet has cage-bar with permanent magnet. This motor is started by cage-bar. When it entered synchronous condition, the rotor is rotated by the permanent magnet. But the design of the permanent magnet is very important, because the breaking torque of the permanent magnet interrupt to start a rotor. Finally, if Flux Barrier is not concerned, we do not get result of our object. Therefore this thesis is concerned about Flux Barrier.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.321-324
• /
• 2005

This paper describes the application of newly developed conducted EMI reduction technique of SVPWM in induction motor drive. The newly developed common mode voltage reduction SVPWM technique doesn't any zero-voltage vector states for inverter control. Hence it can restrict the common mode voltage better than conventional PWM technique. The proposed technique is verified through simulation and experimental results. And by applying vector-controled system, the proposed technique have superior ability of reducing EMI and equal control performance comparing conventional SVPWM technique.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.240-242
• /
• 2005

The linear hybrid stepping motors (LHSM) has been widely used due to its simple structure and low cost control. Despite of its attractive features, the conventional LHSM has the multiples of 4th times harmonic reluctance force from excitation current and cogging force from space harmonic of permeance. This paper propose a new LHSM, which the mechanical and electrical phase difference are 45$^{\circ}$. The proposed motor shows a unique ability to deliver low detent force and we propose a closed-loop control scheme to attack the ripple force for high performance applications. An analytical and experimental comparison between conventional and proposed LHSM is evaluated to confirm the effectiveness of the proposed modeling and control scheme.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.689-691
• /
• 1995

In this paper, a fault detection and isolation unit(FDIU) for a centrifugal pump system driven by DC-motor is proposed. The proposed scheme can be classified into the dedicated observer scheme(DOS). A fuzzy logic based inference engine is adopted for the isolation of each faults. Having the fuzzy inference engine, the proposed FDIU resolve a few important problems of the conventional DOSs with conventional two valued logic. The ouputs of the proposed FDIU are not "ith fault occurred" but the grade of memberships that indicate the consistency of observered symptoms(residuals) with each fault symptoms stored in the rule base. The ouputs can easily be transferred to the ranking of the fault possibilities and it will provide very useful informations in monitoring the process. The simulation results show that the FDIU has very good diagnostic ability even in the noisy environment.