• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.611-615
• /
• 2010

In this paper, we propose a method that exaggerate a character motion using quadratic deformation. While the previous methods tend to exaggerate a rotational motion of an individual joint angle, our method attempt to model the poses of a whole body at each frame and exaggerate those, so that the whole-pose action of the character can be exaggerated. Our method can be computed in real-time, and prevents a joint motion that rotates unexpected direction.

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.347-366
• /
• 2015

GPS and strong-motion sensors are broadly used for the monitoring of structural health and Earth surface motions, focusing on response of structures, earthquake characterization and rupture modeling. Several studies have shown the consistency of the two data sets within at certain frequency (e.g., 0.03

• Journal of Integrative Natural Science
• /
• v.12 no.4
• /
• pp.105-115
• /
• 2019

In this paper, a prediction system is proposed to control the brightness of smart street lamps by predicting the moving path through the reduction of consumption power and information of pedestrian's past moving direction while meeting the function of existing smart street lamps. The brightness of smart street lamps is adjusted by utilizing the walk tracking vector and soft hand-off characteristics obtained through the motion sensing sensor of smart street lamps. In addition, the motion vector is used to analyze and predict the pedestrian path, and the GPU is used for high-speed computation. Pedestrians were detected using adaptive Gaussian mixing, weighted difference imaging, and motion vectors, and motions of pedestrians were analyzed using the extracted motion vectors. The preprocessing process using linear interpolation is performed to improve the performance of the proposed prediction system. Fuzzy prediction system and neural network prediction system are designed in parallel to improve efficiency and rough set is used for error correction.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.158-161
• /
• 2003

Extrusion of forward-gear and backward-rod by combined extrusion with controlling the extrusion velocity using a counter tool is studied. In the combined forward-backward extrusion with controlling extrusion velocity, only parts with short gear can be formed. To obtain longer gear parts, extrusion with reverse ram motion is carried out after the combined forward-backward extrusion process. In this method, combined forward-backward extrusion is carried out until excessive extrusion length is attained and then, the motion of the punch is stopped and the counter tool is moved in the inverse direction and returned to the position for obtaining the desired extrusion length. The experiment is carried out by using lead for billets as a model material. With reverse ram motion, longer gear teeth without under-filling defect can be formed than that by only combined extrusion with controlling extrusion velocity.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.903-904
• /
• 2008

This paper suggests a simple scheme of block motion estimation in which the search pattern selection is based on the classification of motion content available in the spatio temporal neighboring blocks. The search area is divided into eight sectors and the search pattern selection is also based on the direction of predicted motion vector. Experimental results show that the proposed algorithm has achieved good predicted image quality measured in terms of PSNR and has very less computational complexity.

• Proceedings of the IEEK Conference
• /
• 2000.11c
• /
• pp.149-152
• /
• 2000

We propose simple analog MOS circuits producing the one-dimensional compact motion-sensing circuits. In the proposed circuit, the optical flow is computed by a number of local motion sensors which are based on biological motion detectors. Mimicking the structure of biological motion detectors made the circuit structure quite simple, compared with conventional velocity sensing circuits. Extensive simulation results by a simulation program of integrated circuit emphasis (SPICE) indicated that the proposed circuits could compute local velocities of a moving light spot and showed direction selectivity for the moving spot

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.56-59
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.38-45
• /
• 1999

The 2-trowel type concrete floor finishing robot can move in any direction by adjusting the posture or trowels without any wheels. Since the quality of the smoothed and polished concrete floor is determined by plastering speed, we need to control the velocity of the robot. However, we cannot use the typical motion control method because it is very difficult to measure the velocity of the robot, in contrast to the mobile robots with wheels. To overcome this difficulty, the following are studied in this paper: we found that the robot dynamics has the disturbance depending on its translational speed, and showed that there exists the saturated velocity of the robot which is set by the posture of the trowels, and obtained the relationship between the saturated velocity and the posture in the translation. The result enables us to control the motion of the robot only by adjusting the posture of trowels without measuring the velocity of the robot. Currently, we built the troweling robot and are experimenting its performance with the proposed motion control method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.153-159
• /
• 1997

This paper presents the swing motion analysis of the container crane headblock with the passive control device using hydraulic motors and anti-swing ropes. The device hauls at the headblock to opposite direction of its swing motion using the tension difference between anti-swing ropes connected to the headblock. To consider this control mechanism, the headblock is modelled as the rigid bar suspended by two hoist ropes at the overhead trolley and its non-linear equation of motion is derived using Lagrange's equation. Some numerical experiments using the equation are carried out to investigate the swing motion characteristics of the headblock under the variation of geometric relation among the cargo handling components and to evaluate the performance of the anti-swing device.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1408-1411
• /
• 2002

In this paper, we propose a method that converts motion vectors on MPEG coded domain as a uniform set, independent of the frame type and the direction of prediction, and directly utilizes these normalized motion vectors for understanding video contents. This frame-type-independent motion vectors are utilized as feature information for image retrieval or moving object tracking on compressed domain. By simulation, we evaluate the effectiveness of the proposed method and compare its performance to the conventional method.