• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.44-52
• /
• 1990

A collision-free trajectory planning for two robots with designated paths is considered. The proposed method is based on the concept of decomposing the planning problem into two steps: one is determining coordination of two robots, and the other is velocity planning with determined coordination. Dynamics and maximum allowable joint velocities are also taken into consideration in the whole planning process. The proposed algorithm is converted into numerical calculation version based on neural optimization network. To show the usefulness of proposed method, an example of trajectory planning for 2 SCARA type robot in common workspace is illustrated.

• Journal of Sensor Science and Technology
• /
• v.26 no.6
• /
• pp.371-378
• /
• 2017

An accurate and robust estimation of center of rotation (CoR) using optical marker trajectory is crucial in human biomechanics. In this regard, the performances of the two prevailing least-squares methods, the Gamage and Lasenby (GL) method, and the Chang and Pollard (CP) method, are verified in this paper. While both methods are sphere-fitting approaches in closed form and require no tuning parameters, they have not been thoroughly verified by comparison of their estimation accuracies. Furthermore, while for both methods, results for stationary CoR locations are presented, cases for perturbed CoR locations have not been investigated for any of them. In this paper, the estimation performances of the GL method and CP method are investigated by varying the range of motion (RoM) and noise amount, for both stationary and perturbed CoR locations. The difference in the estimation performance according to the variation in the amount of noise and RoM was clearly shown for both methods. However, the CP method outperformed the GL method, as seen in results from both the simulated and the experimental data. Particularly, when the RoM is small, the GL method failed to estimate the appropriate CoR while the CP method reasonably maintained the accuracy. In addition, the CP method showed a considerably better predictability in CoR estimation for the perturbed CoR location data than the GL method. Accordingly, it may be concluded that the CP method is more suitable than the GL method for CoR estimation when RoM is limited and CoR location is perturbed.

• Journal of The Korean Astronomical Society
• /
• v.40 no.4
• /
• pp.179-182
• /
• 2007

Dynamical friction plays an important role in reducing angular momenta of objects in orbital motions. While astronomical objects usually follow curvilinear orbits, most previous studies focused on the linear-trajectory cases. Here, we present the gravitational wake due to, and dynamical friction on, a perturber moving on a circular orbit in a uniform gaseous medium using a semi-analytic method. The circular orbit causes the density wakes to bend along the orbit into asymmetric configurations, resulting in the drag forces in both opposite (azimuthal) and lateral (radial) directions to the perturber motion, although the latter does not contribute to the orbital decay much. For a subsonic perturber, the bending of a wake is only modest and the resulting drag force in the opposite direction is remarkably similar to the linear-trajectory counterpart. On the other hand, a supersonic perturber is able to overtake its own wake, possibly multiple times, creating a high-density trailing tail. Despite the dramatic changes in the wake morphologies, the azimuthal drag force is in surprisingly good agreement with the formulae of Ostriker for the linear-trajectory cases, provided $V_pt=2R_p,\;where\;V_p\;and\;R_p$ are the velocity and orbital radius of the perturber, respectively.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.360-365
• /
• 2013

The paper introduces dynamic generation technique of foot trajectories using CPG(Central Pattern Generator). In this approach, the generated foot trajectories can be changeable according to variable outputs of CPG in various environments, because they are given as mapping functions of the output signals of the CPG oscillators. It enables to provide an adaptable foot trajectory for environmental change. To demonstrate the effectiveness of the proposed approach, experiments on humanoid robot Nao is executed in the Webot simulation. The performance and motion features of CPG based approach is analyzed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.116-122
• /
• 2009

In this paper, we propose a new method which generates the trajectory of the mouth shape for the characters by the user inputs. It is based on the character at a basis syllable and can be suitable to the mouth shape generation. In this paper, we understand the principle of the Korean language creation and find the similarity for the form of the mouth shape and select it as a basic syllable. We also consider the articulation of this phoneme for it and create a new mouth shape trajectory and apply at face of an 3D avatar.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.4
• /
• pp.263-272
• /
• 2021

In this study, aerodynamic coefficients obtained from Computational Fluid Dynamics (CFD) using wind tunnel test-like method is compared with coefficients obtained by actual wind tunnel test. Unsteady analysis has performed with using harmonic equation for motion of the external store. Aerodynamic database is generated based on CFD results to simulate 6 degree-of-freedom store separation analysis. Trajectory is obtained from simulation using both CFD-based and test-based database, and results are compared with trajectory from flight test result. It is concluded that generation of database based on CFD with wind tunnel test technique is valid from good agreement of the trajectory.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.731-736
• /
• 2023

Walking is a periodic motion that contains specific phases and is a basic movement method for humans. Through gait analysis, various musculoskeletal health conditions can be identified. In this study, we propose a calf wearable sensor system that can perform gait analysis without space limitations. Using a ToF(: Time-of-Flight) sensor that measures distance and an IMU(: Inertial Measurement Unit) sensor that measures inclination the heel trajectory of walking was derived by proposed method. In case of abnormal gait with risk of fall, gait is evaluated by analyzing the change pattern of the heel trajectory.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.168-173
• /
• 2003

In this paper, we will present a deeper look on optimal design methods that are related to path-planning for a mobile robot. To control the motion of a mobile robot in a clustered environment, it's necessary to know a suitable trajectory assuming certain start and goal point. Up to now, there are many literatures that concern optimal path planning for an obstacle avoided mobile robot. Among those literatures, we have chosen 2 novel methods for our further analysis. The first approach [4] is based on HJB(Hamilton-Jacobi-Bellman) equation whose solution is the return-function that helps to generate a shortest path to the goal. The later [5] is called polynomial-path-planning approach, in this method, a shortest polynomial-shape path would become a solution if it was a collision-free path. The camera network plays the role as sensors to generate updated map which locates the static and dynamic objects in the space. Therefore, the exhibition of both path planning and dynamic obstacle avoidance by the updated map would be accomplished simultaneously. As we mentioned before, our research will include the motion control of a true mobile robot on those optimal planned paths which were generated by above algorithms. Base on the kinematic and dynamic simulation results, we can realize the affection of moving speed to the stable of motion on each generated path. Also, we can verify the time-optimal trajectory through velocity tuning. To simplify for our analysis, we assumed the obstacles are cylindrical circular objects with the same size.

• The KIPS Transactions:PartB
• /
• v.12B no.5 s.101
• /
• pp.561-566
• /
• 2005

This paper presents a visual tracking algorithm for the golf swing motion analysis by using the information of the pixels of video frames and movement of the golf club to solve the problem fixed center point in model based tracking method. The model based tracking method use the polynomial function for trajectory displaying of upswing and downswing. Therefore it is under the hypothesis of the no movement of the center of gravity so this method is not for the amateurs. we proposed method using the information of pixel and movement, we first detected the motion by using the information of pixel in the frames in golf swing motion. Then we extracted the club head and hand by a properties of club shaft that consist of the parallel line and the moved location of club in up-swing and down-swing. In addition, we can extract the center point of user by tracking center point of the line between center of head and both foots. And we made an experiment with data that movement of center point is big. Finally, we can track the real trajectory of club head, hand and center point by using proposed tracking algorithm.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.1
• /
• pp.94-101
• /
• 2007

Streaming video is expected to become a key service in the developing heterogeneous wireless network. However, sufficient quality of service is not offered to video applications because of bursty packet losses. An effective solution for packet loss in wireless network is to perform a proper concealment at the receiver. However, most concealment methods can not conceal effectively the consecutively damaged macro blocks, since the neighboring blocks are lost. In the previous work, bidirectional motion vector tracking (BMVT) method has been proposed which uses the moving trajectory feature of the damaged macro blocks. In this paper, a channel-adaptive redundancy coding method for the better BMVT error concealment is presented. The proposed method provides enhanced video quality at the cost of a little bit overhead in the wireless error-prone network.