• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.285-293
• /
• 1998

This paper presents unequal error protection and error concealment techniques far robust H.263 video transmission over mobile channels. The proposed error protection scheme has three major features. First, it has the capability of preventing the loss of synchronization information in H.263 video stream as much as possible that the H.263 decoder can resynchronize at the next decoding point, if errors are occurred. Secondly, it employs an unequal error protection scheme to support variable coding rates using rate compatible punctured convolutional (RCPC) codes, dividing the encoded stream into two classes. Finally, a macroblock-interleaving scheme is employed in order to minimize the corruption of consecutive macroblocks due to burst errors, which can make a proper condition for error concealment. In addition, to minimize the spatial error propagations due to the variable length codes, a fast resynchronization scheme at the group of block layer is developed for recovering subsequent error-free macroblocks following the damaged macroblock. futhermore, error concealment techniques based on both side match criterion and overlapped block motion compensation (OBMC) are employed at the source decoder so that it can not only recover the lost macroblock more accurately, but also reduce blocking artifacts. Experimental results show that the proposed scheme can be an effective error protection scheme since proper video quality can be maintained under various channel bit error rates.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.2
• /
• pp.134-147
• /
• 2015

This study proposes a method to determine the effective angular velocity of each motor of a specific four-rows tracked vehicle (FRTV) in order to follow a given turning radius. The configuration of the four-rows tracked vehicle is introduced, and its dynamics analysis model is built using the DAFUL commercial software. The soil has been assumed to be hard ground, and the friction force between the ground and the tracked links is calculated using the Coulomb friction model. This paper uses a simulation to show that the error in the position increased with respect to the angle of the curvatures, so a method is proposed to compensate for the error in the motion of the motors. Various simulations are then carried out to verify the proposed formulation. The effects of the soil characteristics and the driving velocity will be further investigated in future studies.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1382-1389
• /
• 2001

움직임 보상-이산 코사인 변환 (motion compensation-discrete cosine transform : MC-DCT) 기반의 동영상 부호화 기법이 부호화 효율성 및 구현의 단순성으로 인해 널리 사용되고 있으나, 에러 환경에서 구조적으로 취약한 면이 있다. 본 논문에서는 다중 메모리 움직임 보상 예측 (long-term memory motion compensated prediction : LTMP) 기반의 다중 레프런스 프레임을 사용하여 에러에 강인한 동영상 부호화 기법을 제안한다. 또한 제안하는 알고리듬에 기반한 에러 은닉 기법 (error concealment : EC)을 구현한다. 즉, R-D (rate-distortion) 최적화에 프레임간 움직임 벡터 (temporal motion vectors)의 확산 인자를 추가하여 에러에 대한 강인성 및 에러 은닉 기법의 효율성을 증가시켰다. 또한, 제안하는 알고리듬은 시간축상의 에러 전파를 피드백 정보 (negative acknowledgement : NAK)를 사용하여 억제한다. 즉, NAK는 채널 에러에 의해 손실된 영역과 에러가 전파된 영역을 추정하여 움직임 보상 영역에서 제외되도록 하는데 이용된다. 따라서, 제안하는 알고리듬은 PSNR 측면에서 FIU (forced intra update)에 근사하는 성능을 보이나, FIU와는 달리 비트율의 증가를 피할 수 있어 제한된 대역폭의 네트웍을 효율적으로 사용할 수 있다. 컴퓨터 모의 실험을 통해 제안하는 알고리듬이 기존의 H.263 및 LTMP 기반의 부호기에 비해 에러 환경에서 주관적 및 객관적 화질 측면에서 성능이 우수함을 보인다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.863-868
• /
• 2011

This paper presents a method to achieve a synchronous positioning objective for a dual-cylinder electro-hydraulic system with friction characteristics. The control system consists of a VSC (Variable Structure Controller) for each of the hydraulic cylinders and a PID (Proportional-Integral-Derivative) feedback controller. The PID controller is used for controlling the non-synchronous error generated by both cylinders when motion synchronization is carried out. To enhance the position-tracking performance of the individual cylinders friction characteristics is modeled in model, based on the estimated friction force. The simulation and experimental results show that the proposed method can effectively achieve the objective of position synchronization in the dualcylinder electro-hydraulic system, with maximum synchronization error with ${\pm}2\;mm$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1471-1481
• /
• 1998

In this paper, we propose a new digital image stabilization scheme based on the bit-plane matching. In the proposed algorithm, the conventional motion estimation algorithms are applied to the binary images extracted from the bit-plane images. It is shown that the computational complexity of the proposed algorithm can be significantly reduced by replacing the arithmetic calculations with the binary Boolean functions, while the accuracy of motion estimation is maintained. Furthermore, an adaptive algorithm for selecting a bit-plane in consideration of changes in external illumination can provide the robustness of the proposed algorithm. We compared the proposed algorithm with existing algorithms using root mean square error (RMSE) on the basis of the brute-force method, and proved experimentally that the proposed method detects the camera motion more accurately than existing algorithms. In addition, the proposed algorithm performs digital image stabilization with less computation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.33-38
• /
• 2013

The general purposed control system for driving a motion of many different typed robot end-effector, which consists of a controller based on ARM Cotex M3-11017 MCU and an application software for generating a motion of end-effector, was developed. Experimental results show that a positioning error is nearly negligible and a repeatability error is 0.04%. Accordingly the developed control system can be applied practically to actuate a robot end-effector for inspection and maintenance of steam generator heat pipe in nuclear power plant.

• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.356-364
• /
• 2000

Block based fast motion estimation algorithm use the fixed search pattern to reduce the search point, and are based on the assumption that the error in the mean absolute error space monotonically decreases to the global minimum. Therefore, in case of many local minima in a search region we are likely to find local minima instead of the global minimum and highly rely on the initial search points. This situation is evident in the motion boundary. In this paper we define the candidate regions within the search region using the motion information of the neighbor blocks and we propose the multiple local search method (MLSM) which search for the solution throughout the candidate regions to reduce the possibilities of isolation to the local minima. In the MLSM we mark the candidate region in the search point map and we avoid to search the candidate regions already visited to reduce the calculation. In the simulation results the proposed method shows more excellent results than that of other gradient based method especially in the search of motion boundary. Especially, in PSNR the proposed method obtains similar estimate accuracy with the significant reduction of search points to that of full search.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.29-37
• /
• 2008

To transmit video bit stream over low bandwidth such as wireless channel, high compression algorithm like H.264 codec is exploited. In transmitting high compressed video bit-stream over low bandwidth, packet loss causes severe degradation in image quality. In this paper, a new algorithm for recovery of missing or erroneous motion vector is proposed. Considering that the missing or erroneous motion vectors in blocks are closely correlated with those of neighboring blocks. Motion vector of neighboring blocks are clustered according to average linkage algorithm clustering and a representative value for each cluster is determined to obtain the candidate motion vector sets. As a result, simulation results show that the proposed method dramatically improves processing time compared to existing H.264/AVC. Also the proposed method is similar to existing H.264/AVC in terms of visual quality.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.55-65
• /
• 2002

Wavelet transform has recently emerged as a promising technique for video processing applications due to its flexibility in representing non-stationary video signals. Motion estimation which uses wavelet transform of octave band division method is applied In many places but if motion estimation error happens in the lowest frequency band. motion estimation error is accumulated by next time strep and there has the Problem that time and the data amount that are cost In calculation at each steps are increased. On the other hand. wavelet packet that achieved the best image quality in a given bit rate from a rate-distortion sense is suggested. But, this method has the disadvantage of time costs on designing wavelet packet. In order to solve this problem we solved this problem by introducing Top_down method. But we did not find the optimum solution in a given butt rate. That image variance can represent image complexity is considered in this paper. In this paper. we propose a fast multiresolution motion estimation scheme based on the adaptive wavelet transform for video compression.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1512-1515
• /
• 1997

One of the advantages of master-slave teleoperation is scaling concept such as position scaling, force scaling Meanuhile, lots of quantization effects are generated from position and force sensors in the master and slave manipulator. In this paper, to show the output error caused by the quantizaion effects from the position sensor and position scaling factor, simulation is done for free motion without contact in slave side. Transfer functiion model in which the quantization effect is assumed to be a disturbance input to the system is derived. Model shows that Jacobian, scaling factors, and controller affect the output by quantization effects form esnsors. One dof master and slave are used for simulation. In our study, the higher sensor resolution decreases the output error form quantization. Scaling factors can amplify the quantizatiion effects form the sensors in master and slave manipulators.