• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권8호
• /
• pp.361-366
• /
• 2001

This thesis proposes a fuzzy logic cross coupled controller for a multi axis servo system. The overall control system consists of three elements: the axial position controller, the speed controller, and a fuzzy logic cross coupled controller. In conventional multi axis servo system, the motion of each axis is controlled independently without regard to the motion of other axes, in which the contour error, defined as the shortest distance between the desired and actual contours is compensated only by the position error of each axis. This decoupled control approach may result in degraded contouring performance due to such factors as mismatch of axial dynamics and axial loop gains. In practice, such systems contain many uncertainties, Therefore, the multi axis servo system must receive and evaluate the motion of all axes for a better contouring accuracy. Cross coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However the existing cross coupled controllers cannot overcome friction, backlash and parameter variation. Also, since it is difficult to obtain an accurate mathematical model of multi axis system, here we investigate a fuzzy logic cross coupled controller method. Some simulations and experimental results are presented to illustrate the performance of the proposed controller.

• 로봇학회논문지
• /
• 제19권2호
• /
• pp.169-175
• /
• 2024

In this study, we developed control system for stable teleoperation of supermicrosurgical robot platform. The supermicrosurgical robot platform is designed to perform precise anastomosis with micro vessels ranging from 0.3 mm to 0.7 mm. The robotic assistance could help more precise manipulation then manual surgery with the help of motion scaling and tremor filtering. However, since the robotic system could cause several vulnerabilities, control system for stable teleoperation should be preceded. Therefore, we first designed control system including inverse kinematics solver, clutch error interpolator and finite state machine. The inverse kinematics solver was designed to minimized inertial motion of the manipulator and tested by applying orientational motion. To make robot slowly converges to the leader's orientation when orientational error was occurred during clutch, the SLERP was used to interpolate the error. Since synchronized behavior of two manipulators and independent behavior of manipulator both exist, two layered finite state machines were designed. Finally, the control system was evaluated by experiment and showed intended behavior, while maintaining low pose error.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.594-596
• /
• 2006

In this thesis, we propose a algorithm that is able to detect a user's motion. A minute noise of accelerometer arises cumulative error in case of converting velocity and distance, which makes it difficult to detect movement of sensor. We use a lowpass filter, ALS algorithm, and motion detection block to minimize such cumulative error. we experiment using a motion-detective module which is composed of accelerometer, micro-controller, and serial interface. Our scheme is capable of detecting such as up, down, left, right, forward, and backward movement of the module. It is expected that our scheme is applied to a game controller or user interface of a next generation PC.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.507-512
• /
• 2007

This paper presents a tracking filter with ship's motion compensation for a ship-borne radar tracking system. The ship's maneuver is described by displacement and rotational motions in the ship-centered east-north frame. The first order Taylor series approximation of the measurement error covariance of the converted measurement is derived in the ship-centered east-north frame. The ship's maneuver is compensated by incorporating the measurement error covariance of the converted measurement and displacement of the position state in the tracking filter. The simulation results via 500 Monte-Carlo runs show that the proposed method follows the target successfully and provides consistent tracking performance during ship's maneuvers while the conventional tracking filter without ship motion compensation fails to track during such periods.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.161.5-161
• /
• 2001

Robots are required to assist our activities in daily life. In this paper, we focus on arm movement to catch moving object as one of important tasks frequently performed by human. We propose an algorithm which enables a robot to perform human-like arm motion to catch a moving object. First we analyze human hand trajectories and velocity profiles to catch an object. From the experimental results, we extract some characteristics in the process of approaching and following a moving object and confirm that these are necessary to realize human-like motion. We then adopt an instantaneous optimal control method which evaluates the error and energy cost at each sampling step, and design two time-varying weight matrices to introduce human characteristic into robot motion. The matrix concerning the error is defined as a time-increasing ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.177.3-177
• /
• 2001

In this paper, the design of the in-motion alignment system of Strapdown Inertial Navigation System(SDINS) using Robust Extended Kalman Filter(REKF) is presented. The compensation of errors in the aided navigation system is accomplished by the indirect feedback filtering. The performance of the aided navigation algorithm is very sensitive to the accuracy of the initial estimate, which is the characteristic of the EKF. Unfortunately, the initial attitude error can be very large during the in-motion alignment. To overcome the in-motion alignment under large initial attitude error problem, the REKF using linear robust filtering technique is proposed. The linear robust H$_2$ filter can be adopted for nonlinear ...

• 소음진동
• /
• 제10권4호
• /
• pp.584-595
• /
• 2000

We design a new actuator for high density optical device in order to control the radial tilting motion. The newly designed actuator makes it possible to control the tilting motion actively, while the coventional actuator compress tilting motion with passive spring. First of all, We present 3-dimensional modeling of actuator and accomplish the modal analysis and magnetic analysis of actuator. Due to these results, a new designed actuator has performance of high sensitivity and high second resonance frequency. Secondly, We present the 3-DOF dynamic modeling of the 4-wire spring type actuator. sensitivity analysis is performed to consider the assembling error, such as the difference of mass center and force center. From these results, the sensitivities of rotation due to the assembly error are revealed and design criteria of rotation is presented. And experimental results of a newly designed actuator are presented and compared with theoretical results. Finally, We propose a dynamic tilt compensation and high acceleration actuator for high density optical storage devices.

• 전자공학회논문지S
• /
• 제34S권9호
• /
• pp.91-98
• /
• 1997

In this paper, a new pixel decimation algorithm for the estimation of motion vector is proposed. In traditional methods, the computational cost can be reduced since only part of the pixels are used for motion vector calculation. But these methods limits the accuracy ofmotion vector because of the same reason. We derive a selection criteria of subsampled pixels that can reduce the probablity of false motion vector detection based on stochastic point of view. By using this criteria, a new pixel decimation algorithm that can reduce the prediction error with similar computational cost is presented. The simulation results applied to standard images haveshown that the proposed algorithm has less mean absolute prediction error than conventional pixel decimation algorithm.

• Journal of Communications and Networks
• /
• 제12권1호
• /
• pp.5-10
• /
• 2010

This paper introduces a new fast motion estimation based on estimating a block matching error (i.e., sum of absolute difference (SAD)) between blocks which can eliminate an impossible candidate block much earlier than a conventional partial distortion elimination (PDE) scheme. The basic idea of the proposed scheme is based on predicting the total SAD of a candidate block using its partial SAD. In particular, in order to improve prediction accuracy and computational efficiency, a sub-sample based block matching and a selective pixel-based approaches are employed. In order to evaluate the proposed scheme, several baseline approaches are described and compared. The experimental results show that the proposed algorithm can reduce the computations by about 44% for motion estimation at the cost of 0.0005 dB quality degradation versus the general PDE algorithm.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.94-102
• /
• 1998

In this paper, we proposed a dynamic selection scheme of advnaced prediction mode(DAPM), which reduces computational cost and improves coding efficiency. We can select the mode between default prediction mode (DPM) and advanced prediction mode (APM) according to motion componenets in a frame dynamically. For this purpose, we defined error distribution of motion estimation (EDME) as sum of absolute difference(SAD) for each searching points. This distribution region is divided to four subregions. We calculate minimum values in each subregions and then, we determine whether block motion estimation is performed or not depending on the results. As a result, we reduced computational complexity to 30% without degradation of image quality compared to fixed APM(FAPM) by selecting DPM for linear movement.