• Computers and Concrete
• /
• 제13권6호
• /
• pp.739-748
• /
• 2014

In this article, by using experimental studies and artificial neural network has been tried to investigate the use of nano-silica as concrete admixture to reduce alkali-silica reaction. If there are reactive aggregates and alkali of cement with enough moisture in concrete, a gel will be formed. Then with high reactivity between alkali of cement and existence of silica in aggregates, this gel will expand by absorption of water, and causes expansive pressure and cracks be formed. At the time passes, this gel will reduce both durability and strength of the concrete. By reducing the size of silicate to nano, specific surface area of particles and number of atoms on the surface will be increased, which causes more pozzolanic activity of them. Nano-silica can react with calcium hydroxide ($Ca(OH)_2$) and produces C-S-H gel. In this study, accelerated mortar bar specimens according to ASTM C 1260 and ASTM C 1567, with different mix proportions were prepared using aggregates of Kerman, such as: none admixture and plasticizer, different proportions of nano-silica separately. By opening the moulds after 24 hour and curing in water at $80^{\circ}C$ for 24 hour, then curing in (1N NaOH) at $80^{\circ}C$ for 14 days, length expansion of mortar bars were measured and compared. It was noted that, the lowest length expansion of a specimens shows the best proportion of admixture based on alkali-silica reactivity. Then, prediction of alkali-silica reaction of concrete has been investigated by using artificial neural network. In this study the backpropagation network has been used and compared with different algorithms to train network. Finally, the best amount of nano silica for adding to mix proportion, also the best algorithm and number of neurons in hidden layer of artificial neural network have been offered.

• 콘크리트학회논문집
• /
• 제23권5호
• /
• pp.675-682
• /
• 2011

최근 콘크리트 구조물의 보강시 사용되는 FRP(fiber reinforced polymer)를 이용한 보강에서, 철근콘크리트의 피복부분에 홈을 형성하고 이 홈내부에 FRP 바를 삽입한 후 에폭시 모르타르 등으로 보강하는 방법, 즉 표면매입보강(near-surface-mounted retrofit, NSMR)방법의 연구가 최근 활발히 진행되고 있다. 이 연구는 FRP 판을 철근콘크리트 표면에 매입보강시 FRP 판의 부착 특성을 실험적으로 연구한 논문이다. FRP 판의 매입 길이, 전단키의 유무, 보강열수 등을 변수로 부착 실험을 실시하여 파괴 기구를 관찰하고 이를 근거로 콘크리트 할렬 파괴시의 인발강도를 산정할 수 있는 강도식을 제안하였다. 실험 결과 매입 길이가 길수록 인발 내력은 증가하며 FRP 판의 열수가 증가할수록 내력이 증진되는 것으로 나타났다. 콘크리트의 할렬 파괴를 고려하여 내력을 산정한 결과 실험 결과와 좋은 대응을 보이는 것으로 나타났다.

• Computers and Concrete
• /
• 제12권2호
• /
• pp.131-149
• /
• 2013

Various types of reinforcement splicing methods have been developed and implemented in reinforced concrete construction projects for achieving the continuity of reinforcements. Due to the complicated reinforcement arrangements and the difficulties in securing bar spacing, the traditional lap splicing method, which has been widely used in reinforced concrete constructions, often shows low constructability and difficulties in quality control. Also, lap spliced regions are likely to be over-reinforced, which may not be desirable in seismic design. On the other hand, mechanical splicing methods can offer simple and clear arrangements of reinforcement. In order to utilize the couplers for the ribbed-deformed bars, however, additional screw processing at the ends of reinforcing bars is typically required, which often lead to performance degradations of reinforced concrete members due to the lack of workmanship in screw processing or in adjusting the length of reinforcing bars. On the contrary, the use of screw-ribbed reinforcements can easily solve these issues on the mechanical splicing methods, because it does not require the screw process on the bar. In this study, the mechanical coupler suitable for the screw-ribbed reinforcements has been developed, in which any gap between the reinforcements and sleeve device can be removed by grouting high-flow inorganic mortar. This study presents the uniaxial tension tests on the screw-ribbed reinforcement with the mechanical sleeve devices and the cyclic loading tests on RC columns with the developed coupler. The test results show that the mechanical sleeve connection developed in this study has an excellent splicing performance, and that it is applicable to reinforced concrete columns with a proper confinement by hoop reinforcement.

• Advances in concrete construction
• /
• 제16권1호
• /
• pp.59-68
• /
• 2023

In the pumping process, concrete moves along the pipe and experiences both pressure and shear. This changes the workability and flow characteristics of the concrete. However, the effect of pressure and shear on the change in properties of concrete during the pumping process has not yet been accurately identified. This study analyzed the effects of pressure and shear on the properties of concrete during pumping. For quantitative tests, lab-scale test equipment capable of simulating the pressure and shear applied to concrete during pumping was used. For one coarse aggregate type, two paste types, three mortar types, and five concrete types, the effects of pressure, shear, and shear under pressure conditions were examined by varying the maximum pressure (0 to 200 bar) and the rotational speed of the vane for shear (0 to 180 rpm). Under the maximum pressure condition of 200 bar, the water absorption of coarse aggregate increased by 0.62% and that of fine aggregate also increased. When the concrete was under pressure, significant changes (a reduction in a slump and an increase in viscosity and yield stress) compared with the effect of the elapsed time occurred owing to an increase in the water absorption of the aggregates. When both pressure and shear were applied to concrete, both the slump and viscosity decreased. As the rotational speed of the vane increased, changes in properties became significant. Shearing in the absence of pressure maintained the properties of concrete. However, shearing under pressure conditions caused a reduction in slump and viscosity.

• International Journal of Concrete Structures and Materials
• /
• 제18권1E호
• /
• pp.63-70
• /
• 2006

This study tested the alkali-silica reactivity of various types of crushed stones, following the specifications of ASTM C 227 and C 1260, and the results obtained from the tests were compared. This study also analyzed the effects of particle size and grading of reactive aggregate based on the expansion of mortar-bar due to an alkali-silica. The effect of mineral admixtures to reduce the detrimental expansion caused by the alkali-silica reaction was investigated based on the method specified by ASTM C 1260. The mineral admixtures used in this study were fly ash, silica fume, metakaolin and ground granulated blast furnace slag. The replacement ratios of 0, 5, 10, 15, 25 and 35% were uniformly applied to all the mineral admixtures, and the replacement ratios of 45 and 55% were additionally applied for the admixtures that could sustain the workability at these ratios. The results indicate that replacement ratios of 25% for fly ash, 10% for silica fume, 25% for metakaolin and 35% for ground granulated blast furnace slag were the most effective in reducing the expansion due to the alkali-silica reaction under the experimental conditions of this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.397-404
• /
• 1999

It is essential to measure load transfer mechanism of pile to check the appropriateness of assumptions made for design purpose and to continuously monitor the behavior of pile foundation. Through many attempts to monitor the behavior of super-structure in civil engineering area using several optical fiber sensors have been made, application of optical fiber sensor technology on pile foundation has not been tried up to now. Load transfer of model piles during compression loading was measured by optical fiber sensors and compared with the measurement by strain gauges. Fiber Bragg Grating(FBG) sensor system was used since it has many advantages, such as easy multiplexing, high sensitivity, and simple fabrication. Besides the model pile tests, uniaxial tension test of steel bar and compression tests of mortar specimen were carried out to evaluate the performance of FBG sensors in embedded environments. The shift of refilming wavelength due to the strain in FBG sensor is converted to the strain at sensor location and the dependence between them is 1.28 pm/${\mu}$ strain. FBG sensors embedded in model pile showed a better survivability than strain gauges. Measured results of load transfer by both FBG sensors and strain gauges were similar, but FBG sensors showed a smoother trend than those by strain gauge. Based on the results of model pile test, it was concluded that the use of FBG sensor for strain measurement in pile has a great potential for the analysis of pile load transfer.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.643-649
• /
• 2017

Masonry walls are amongst the oldest building systems. A large portion of the research on these structures focuses on the load-bearing walls. Numerical methods have been generally used in modelling load-bearing walls during recent years. In this context, macro and micro modelling techniques emerge as widely accepted techniques. Micro modelling is used to investigate the local behaviour of load-bearing walls in detail whereas macro modelling is used to investigate the general behaviour of masonry buildings. The main objective of this study is to investigate the elastic behaviour of the load- bearing walls in masonry buildings by using micro modelling technique. In order to do this the brick and mortar units of the masonry walls are modelled by the combination of plane truss elements and plane frame elements with no shear deformations. The model used in this study has fewer unknowns then the models encountered in the references. In this study the vertical frame elements have equivalent elasticity modulus and moment of inertia which are calculated by the developed software. Under in-plane static loads the elastic displacements of the masonry walls, which are encountered in literature, are calculated by the developed software, where brick units are modelled by plane frame elements, horizontal joints are modelled by vertical frame elements and vertical joints are modelled by horizontal plane truss elements. The calculated results are compatible with those given in the references.

• 콘크리트학회논문집
• /
• 제15권3호
• /
• pp.497-503
• /
• 2003

Supplementary cementitious materials (SCM) such as fly ash, ground granulated blast furnace slag and silica fume are now being extensively used in concrete to control expansion due to alkali-silica reactivity (ASR). However, the replacement level of a single SCM needed to deleterious ASR expansion and cracking may create other problem and concerns. For example, incorporating silica fume at levels greater than 10％ by mass of cement may lead to dispersion and workability concerns, while fly ash can lead to poor strength development at early age, The combination of silica fume and fly ash in ternary cementitious system may alleviate this and other concerns, and result in a number of synergistic effects. The aim of the study was to enable evaluation of more realistic suitability of a silica fume-fly ash combination system for ASR resistance based on an in-house modification of ASTM C 1260 test method. The modification can be more closely identified with actual field conditions. In this study three different strengths of NaOH test solution(1N, 0.5N, and 0.25N) were used to measure the expansion characteristics of mortar bar made with a reactive aggregate. The other variable included longer testing period of 28 days instead of a conventional 14 days.

• 콘크리트학회논문집
• /
• 제24권6호
• /
• pp.705-714
• /
• 2012

프리캐스트 중공 사각형 철근콘크리트 교각에 대하여 준정적 실험을 수행하여 내진성능을 검증하였다. 기둥 실험체는 프리캐스트 세그먼트를 접합하고 나서, 미리 배치된 쉬스관에 축방향 철근을 연결 없이 연속으로 배치한 후 모르타르로 그라우팅하는 방법으로 제작하였다. 실험의 주요변수는 형상비, 축방향 철근비, 횡방향 철근량, 프리캐스트 세그먼트의 접합위치이다. 기둥 실험체의 형상비는 4.5와 2.5, 축방향 철근비는 1.15%와 3.07%로 각각 두 가지의 값을 가진다. 횡방향 철근량은 도로교설계기준에서 규정하고 있는 완전연성 설계에 요구되는 양의 99%, 55%, 50%, 27%로 배근되었다. 소성힌지 구역에서의 프리캐스트 세그먼트 접합위치는 기둥 하단에서 기둥단면 두께의 0.5배와 1.0배인 위치로 하였다. 실험 결과로서 균열 및 파괴모드, 축력-휨 강도, 하중-변위 포락선, 변위연성도를 분석하였으며, 도로교설계기준의 연성도 내진설계법을 적용하였을 때의 안전율을 분석하였다. 기둥 실험체는 축방향 철근이 모르타르와 쉬스관에 의하여 구속되고, 쉬스관이 횡방향 철근으로 구속되는 구조로 인하여 큰 변위까지 축방향 철근의 좌굴이 지연되어 연성도가 크게 나타났다.

• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.345-352
• /
• 2011

연구의 목적은 반응성 골재를 함유한 알칼리 활성화 고로슬래그 미분말의 알칼리-골재반응으로 인한 팽창을 조사하기 위한 것이다. 또한 이 연구는 현재 존재하고 있는 반응성 골재와 알칼리 재료들의 거동과 관련하여 특별히 관여 되어 지고 있다. 실험 방법은 EDS, SEM을 통하여 알칼리-실리카 반응 생성물의 구성이나 미세구조를 관찰하였으며 알칼리-실리카 반응에 의한 모르터 바의 팽창정도를 측정하였다. 실험 결과에 따르면 알칼리-활성화된 모르터는 알칼리 실리카 반응 때문에 팽창이 되었지만 14일 재령에서 0.1%의 팽창률을 나타내어 알칼리-실리카반응에 대하여 안전한 것으로 나타났다. 그리고 촉진 실험 후 SEM과 BEM분석한 결과 골재 주변과 시멘트 페이스트에 알칼리-실리카 겔 및 띠 모양의 생성물이 나타난 것을 볼 수 있었다. EDX에 따르면 반응생성물이 알칼리 활성화 고로슬래그를 사용하였을 경우 현격히 감소한 것을 볼 수 있다. 추가적으로 광물학적 혼화재료의 대체 재료로써 콘크리트 내구성의 특성을 보증하기 위하여 알칼리 활성화 고로슬래그의 품질을 향상시키는 연구가 필요하다.