• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.79-79
• /
• 2017

Metallic biomaterials have been mainly used for the fabrication of medical devices for the replacement of hard tissue such as artificial hip joints, bone plates, and dental implants. Because they are very reliable on the viewpoint of mechanical performance. This trend is expected to continue. Especially, Ti and Ti alloys are bioinert. So, they do not chemically bond to the bone, whereas they physically bond with bone tissue. For their poor surface biocompatibility, the surface of Ti alloys has to be modified to improve the surface osteoinductivity. Recently, ceramic-like coatings on titanium, produced by plasma electrolytic oxidation (PEO), have been developed with calciumand phosphorus-enriched surfaces. A lso included the influences of coatings, which can accelerate healing and cell integration, as well as improve tribological properties. However, the adhesions of these coatings to the Ti surface need to be improved for clinical use. Particularly Silicon (Si) has been found to be essential for normal bone, cartilage growth and development. This hydroxyapatite, modified with the inclusion of small concentrations of silicon has been demonstrating to improve the osteoblast proliferation and the bone extracellular matrix production. Strontium-containing hydroxyapatite (Sr-HA) was designed as a filling material to improve the biocompatibility of bone cement. In vitro, the presence of strontium in the coating enhances osteoblast activity and differentiation, whereas it inhibits osteoclast production and proliferation. The objective of this work was to study Morphology of bone-like apatite formation on Sr and Si-doped hydroxyapatite surface of Ti-6Al-4V alloy after plasma electrolytic oxidation. Anodized alloys was prepared at 270V~300V voltages with various concentrations of Si and Sr ions. Bone-like apatite formation was carried out in SBF solution. The morphology of PEO, phase and composition of oxide surface of Ti-6Al-4V alloys were examined by FE-SEM, EDS, and XRD.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.134-145
• /
• 1998

Facial hyperpigmentation in women, which is considered to be a serious cosmetic disability and a cause of mental distress, requires proper management. Melanocyte dendricity is a crucial factor affecting epidermal pigmentation. We found that BQ-788, the endothelin-B (ETB) receptor antagonist, blocks the formation of multi-dendricity which is induced by cocultured keratinocytes. Melanocytes in vivo show numerous dendrites which are in close contact with multiple keratinocytes, forming the epidermal-melanin unit. While melanocytes transfer their melanosomes into the neighboring keratinocytes via dendrites, keratinocytes secrete many growth factors and cytokines that influence viability, morphology, and melanin formation of melanocytes. Endothelin-1 (ET-1), prostaglandin E2(PGE2), and leukotriene-C4 (LT-C4) have been suggested as the candidates for increasing dendricity. Other reports suggested that ET-1 has stimulatory effects on proliferation and melanin formation of melanocytes in vitro. In the present study, using type-specific ET receptor antagonists, we observed how the morphology of melanocytes could be modulated in a coculture system. In addition, the roles of ET-1 for morphology and proliferation on melanocytes were evaluated in different culture media. We suggest that ET-1 increases dendricity and proliferation of melanocytes, and that its dendrite-inducing effect and mitogenic effect are regulated independently.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.800-805
• /
• 2017

Randomly patterned and wet chemical etching processes were used to treat anti-glare of display cover glasses. The surface and optical properties of grain size and surface morphology controlled by randomly patterned etching and wet chemical solution etching were investigated. The surface morphology and roughness of the etched samples were examined using a spectrophotometer and a portable surface roughness (Ra) measuring instrument, respectively. The gloss caused by reflection from the glass surface was measured at $60^{\circ}$ using a gloss meter. The surface of the sample etched by the doctor-blade process was more uniform than that obtained from a screen pattern etching process at gel state etching process of the first step. The surface roughness obtained from the randomly patterned etching process depended greatly on the mesh size, which in turn affected the grain size and pattern formation. The surface morphology and gloss obtained by the etching process in the second step depended primarily on the mesh size of the gel state etching process of the first step. In our experimental range, the gloss increased on decreasing the grain size at a lower mesh size for the first step process and for longer reaction times for the second step process.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.157-161
• /
• 1994

To investigate the morphology of Bacillus thuringiensis crystal proteins, two type crystal protein genes, cryIA(c) gene under the control of cryIA(b) gene promoter and cryIIA gene under the control of its own promoter, were transformed in B. thuringiensis acrystalliferous mutant strain and the transformants were characterized by SDS-PAGE and scanning electron microscopy. The expression and formation of crystal proteins in B. thuringiensis subsp. kurstaki Cry-B revealed that crystal proteins appear to have same molecular weight and morphology to those of wild type strain's, suggesting that the expression and formation of crystal proteins affected not by host cell or recombination of cryIA(e) gene under the control of cryIA(b) gene promoter but by only structural fragment of protoxin.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.6
• /
• pp.11-23
• /
• 2002

Computational models up to now for Korean morphology have been linear in that it deal with only segmentation of morphemes rather than formation of the internal structure of a word. When integrating a linear computational model with syntax analysis, it requires an additional interface component between this model and the syntax to bind morphemes into sentence constituents. Furthermore the linear model is not semantically intuitive. In this paper, based on word-syntactical viewpoint, we propose an integrated computational model that deals with morpheme segmentation, formation of syntactic element (sentence constituent), and even internal structure of word. Formalism of two-level morphology is employed to cope with morpheme segmentation and alternation problems, and functional diacritics are proposed to incorporate categorial context into the two-level formalism. A modified GLR-based algorithm is also proposed to check syntactical constraint of morphemes.

• Journal of the Korean earth science society
• /
• v.34 no.5
• /
• pp.407-414
• /
• 2013

This study presents the global star formation efficiency (SFE) of 272 local star-forming galaxies based on the HI gas mass, stellar mass, star formation rate (SFR), and morphology. The SFE increases as the stellar mass increases while the specific SFR decreases. The SFE is enhanced for galaxies with large H$\acute{a}$ equivalent widths, which is primarily due to the large SFR, not due to the large available amount of gas. The SFE is also enhanced by a factor of ~2 for merging systems compared to the normal spirals, showing that the merger-induced high pressure and density environment are crucial for the active star formation. Based on the SFR scaling relation, I present a SFR calibration formula using the HI gas mass.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.5
• /
• pp.375-379
• /
• 1991

Formation of TiAs precipitate through the reaction between TiSi2 with C54 structure and heavily doped arsenic ion in poly-silicon, and influence of TiSAs and silicon distribution resulted from the reaction TiSi2+As ->2Si on the morphology degradation have been studied.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.16 no.2
• /
• pp.61-66
• /
• 2008

In this paper, the regenerated silk fibroin (SF)/nylon 6 blend filaments were fabricated using wet spinning technique and the effect of coagulant on the post drawing and morphology of blend filaments was investigated. In the result of wet spinnability, methanol, acetone, DMF, and THF showed relatively good coagulation strength and fiber formation for the regenerated SF. On the contrary, they did not exhibit strong enough to produce a uniform nylon 6 filament due to the lack of coagulation strength. In the examination of post drawing performance, methanol showed the highest maximum draw ratio of the blend filament over all blend ratios. The maximum draw ratio of SF/nylon 6 blend filaments decreased with the reduction of SF content regardless of type of coagulant. SEM observation showed the consistent result with that of post-drawing performance. As SF content decreased, the uniform and regular structure was changed to irregular one. In particular, the severe macro-phase separation between SF and nylon 6 could be detected in the 50/50 SF/nylon 6 blend filaments coagulated in methanol and THF.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.1
• /
• pp.69-75
• /
• 2004

In this study, various model composite latexes were synthesized using n-butyl acrylate and methyl methacrylate as comonomers by seeded multi-staged emulsion polymerization. Monodispersed model composite latex particles with size of 190 nm and polydispersity index of 1.05, which have various morphology including random copolymer particle, soft-core/hard-shell particle, hard-core/soft shell particle, and gradient-type copolymer particle, homopolymers particles were prepared. The designed morphology of model composite particles were confirmed.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.3
• /
• pp.259-266
• /
• 2004

Film properties of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. Tensile strength and tensile elongation at break of final films were evaluated. Those properties can be interpreted in terms of PBA/PMMA phase ratio and their morphology. The interfacial adhesion strength was also evaluated using $180^{\circ}$ peel strength measurement and cross hatch cutting test.