• Corrosion Science and Technology
• /
• v.9 no.2
• /
• pp.67-73
• /
• 2010

Niobium microalloying is effective in hot-rolled and cold-rolled steels by providing a fine-grained microstructure resulting in increased strength. To optimize the strengthening effect, alloy design and hot-rolling conditions have to be adapted. As a key issue the dissolution and precipitation characteristics of Nb are discussed in particular with regard to the run-out table conditions. It is then considered how the hot-rolled microstructure and the solute state of Nb interact with the hot-dip galvanizing cycle. The adjusted conditions allow controlling the morphology and distribution of phases in the cold-rolled annealed material. Additional precipitation hardening can be achieved as well. The derived options can be readily applied to produce conventional HSLA and IF high strength steels as well as to modern multiphase steels. It will be explained how important application properties such as strength, elongation, bendability, weldability and delayed cracking resistance can be influenced in a controlled and favorable way. Examples of practical relevance and experience are given.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.84-85
• /
• 2002

Recently doped perovskite manganites have renewed interest because they exhibit a variety of unique magnetic and electronic behaviors such as colossal magnetoresistance (CMR), percolative phase separation, spin/charge/orbital ordering, and so on. For this reason, fabrication of thin films with the best surface morphology and controlling their magneto transport properties is essential for making magneto-resistive devices. (omitted)

• Molecules and Cells
• /
• v.40 no.3
• /
• pp.163-168
• /
• 2017

Microglia are the primary resident immune cells of the central nervous system (CNS). They are the first line of defense of the brain's innate immune response against infection, injury, and diseases. Microglia respond to extracellular signals and engulf unwanted neuronal debris by phagocytosis, thereby maintaining normal cellular homeostasis in the CNS. Pathological stimuli such as neuronal injury induce transformation and activation of resting microglia with ramified morphology into a motile amoeboid form and activated microglia chemotax toward lesion site. This review outlines the current research on microglial activation and chemotaxis.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.24-30
• /
• 2006

This study was performed to characterize inverse emulsion type cationic polyacrylamide (PAM) and to compare with powder and salt dispersion type PAMs as a retention and drainage aid. Salt dispersion type PAM has defects of high amount of salt which increases conductivity of white water, low active polymer contents and relatively worse retention and drainage properties than others because of its low molecular weight. Powder type PAM has benefit of high active polymer contents and good retention and drainage properties, but defects of low dissolution speed and insoluble particle generation were observed. However, inverse emulsion type showed the best retention and drainage aids among them by controlling molecular weight and morphology easily and it had relatively higher active polymer contents and better solubility.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.150.1-150.1
• /
• 2003

Gelsolin, a actin binding protein, has been demonstrated to be involved in controlling cell morphology, motility, signaling, and apoptosis. It's expression is frequently downregulated in cervix cancer and several types of different human cancers indicating the role of gesolin in suppression of tumorigenicity. Apicidin, a novel histone deacetylase inhibitor, has been shown to cause growth arrest and morphological change of cancer cells, resulting from the alternation of protein expression, such as p21^${WAF1/Cip1}$ and gelsolin. (omitted)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.451-456
• /
• 2024

Organic photovoltaic (OPV) devices have attracted attention due to their high efficiency and simple manufacturing process. Applying an overlayer to OPV devices is one way to improve their performance because it can improve charge extraction and suppress vertical phase separation. In addition, dichloromethane (DCM) was used as an orthogonal solvent to minimize the effect on other layers. However, an coating problems due to the use of DCM were found, which affects surface morphology as rough or peeling. Additional research efforts are needed to solve these problems, and optimal results are expected to be obtained by utilizing various buffer layers or selective organic solvents.

• Archives of Metallurgy and Materials
• /
• v.66 no.4
• /
• pp.991-995
• /
• 2021

In this paper, synthesize MoO₃ particles with various particle properties by control growth influence factors was mainly studied. The experimental conditions were established in molar ratio of Mo:urea and pH levels. The plate-type of MoO₃ particles were formed without proceeding any established conditions, but the rod-shape particles were formed by adjusting molar ratio of Mo:urea. Also, different ranges of the particle size were formed by adjusting experimental conditions. Through the results, it was confirmed that particles with a size in the range of 300 ~ 400 nm were obtained by adjusting precursor concentration and the micrometer size of particles were formed by increase pH levels. The properties of the particles formed accordingly by setting various factors that can affect the growth process of MoO₃ particle was analyzed as variables and the particle growth behavior was also observed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.167-172
• /
• 2013

Titanium dioxides nanoparticles coated aluminum oxide powders were fabricated by pulsed laser deposition (PLD) with Nd : YAG laser at 266 nm. The Pulse laser energy is 100 mJ/pulse. During the irradiation of the focused laser on the $TiO_2$ target, Ar gas is supplied into the chamber. The gas pressure is varied in a range of $1{\times}10^{-2}$ to 100 Pa. Titanium dioxides nanoparticles deposited aluminum oxide powders were characterized by using energy dispersive X-ray spectroscopy (EDX), high resolution transmission electron microscopy (HR-TEM), in order to understand the effect of Ar background gas on surface morphology and properties of the powders. The coated $TiO_2$ nanoparticles had nanosized spherical shape and the crystallite sizes of 10~30 nm. The morphology of coated $TiO_2$ nanoparticles is not affected by gas pressure. However, the particle size and crystallinity slightly increased with the increase of gas pressure. According to this technique, the size and crystallinity of nanoparticles can be easily controlled by controlling pressure during the laser irradiation.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.12
• /
• pp.2058-2071
• /
• 2015

A comparative study was conducted to evaluate precision and accuracy in controlling the temperature dependence of encapsulated microbial time-temperature integrators (TTIs) developed using two different emulsification techniques. Weissela cibaria CIFP 009 cells, immobilized within 2% Na-alginate gel microbeads using homogenization (5,000, 7,000, and 10,000 rpm) and Shirasu porous glass (SPG) membrane technologies (10 μm), were applied to microbial TTIs. The prepared micobeads were characterized with respect to their size, size distribution, shape and morphology, entrapment efficiency, and bead production yield. Additionally, fermentation process parameters including growth rate were investigated. The TTI responses (changes in pH and titratable acidity (TA)) were evaluated as a function of temperature (20℃, 25℃, and 30℃). In comparison with conventional methods, SPG membrane technology was able not only to produce highly uniform, small-sized beads with the narrowest size distribution, but also the bead production yield was found to be nearly 3.0 to 4.5 times higher. However, among the TTIs produced using the homogenization technique, poor linearity (R²) in terms of TA was observed for the 5,000 and 7,000 rpm treatments. Consequently, microbeads produced by the SPG membrane and by homogenization at 10,000 rpm were selected for adjusting the temperature dependence. The E_a values of TTIs containing 0.5, 1.0, and 1.5 g microbeads, prepared by SPG membrane and conventional methods, were estimated to be 86.0, 83.5, and 76.6 kJ/mol, and 85.5, 73.5, and 62.2 kJ/mol, respectively. Therefore, microbial TTIs developed using SPG membrane technology are much more efficient in controlling temperature dependence.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.2
• /
• pp.325-334
• /
• 2007

Recently, quorum sensing has been implicated as an important global regulator controlling the production of numerous virulence factors such as capsular polysaccharides in bacterial pathogens. The nucleotide and deduced amino acid sequences of smcR, a homolog of V. harveyi luxR identified from V. vulnificus ATCC29307, were analyzed. The amino acid sequence of SmcR from V. vulnificus was 72 to 92% similar to those of LuxR homologs from Vibrio spp. Functions of SmcR were assessed by the construction of an isogenic mutant, whose smcR gene was inactivated by allelic exchanges, and by evaluating its phenotype changes in vitro and in mice. The disruption of smcR resulted in a significant alteration in biofilm formation, in type of colony morphology, and in motility. When compared with the wild-type, the smcR mutant exhibited reduced survival under adverse conditions, such as acidic pH and hyperosmotic stress. The smcR mutant exhibited decreased cytotoxic activity toward INT 407 cells in vitro. Furthermore, the intraperitoneal $LD_{50}$ of the smcR mutant was approximately $10^2$ times higher than that of parental wild-type. Therefore, it appears that SmcR is a novel global regulator, controlling numerous genes contributing to the pathogenesis as well as survival of V. vulnificus.