• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.11-16
• /
• 2012

In 2014 Flex-PLIfor the pedestrian protection will be applied to NCAP test. The most significant feature of Flex-PLI is constructed with segmental bone cores for the femur and tibia regions. So it can be more reproducible by representing pedestrian injuries such as knee ligament and tibia injury during the pedestrian crash against vehicle. In this paper, Analyzed the characteristics of Flex-PLI through the structural analysis and the test results by using Flex-PLI for our compact vehicles. Finally countermeasures into compact vehicle were proposed to fulfill the injury criteria of Flex-PLI.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.225-230
• /
• 2005

The proposed Triple-band Compact Chip Antenna using Coupled Meander line and stacked meander Structure for Mobile RFID/PCS/WiBro. The proposed antenna is designed to operate at 900, 1800, and 2350 MHz, and is realized by parasitic coupled and stacked a meander line. Meander lines are using extend length of effective current path more than monopole and contribute miniaturization. The coupled meander line controls the excitations of the Mobile RFID and PCS, stacked meander line controls the excitation of the WiBro. The proposed antenna size is $11mm\times22.5mm\times1mm$. The antenna supports 900MHz, 1800MHz and 2350MHz operations simultaneously with bandwidths of 33MHz, 230MHz and 100MHz, respectively. The proposed antenna gains are result of simulation to be -0.8dBi, 3dBi and 3.8dBi, respectively.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.140-142
• /
• 2005

This paper describes the current- based compact digital motor protective relay for low and high voltage induction motors, which are widely used in industrial and commercial power systems. The existing protective relays for motor protection had only overload, short circuit, reverse phase, open circuit and grounding protective elements, and measurement, start/stop control function. But in present day, for automation system, various functions are required, especially motor management and sequence control function and more. To meet these requirements, we developed an economic current-based compact digital motor protective relay which had various function to control, manage and monitor the induction motor.

• Journal of the Korean Mathematical Society
• /
• v.57 no.4
• /
• pp.935-955
• /
• 2020

In this paper we present a measurable version of the Smale's spectral decomposition theorem for homeomorphisms on compact metric spaces. More precisely, we prove that if a homeomorphism f on a compact metric space X is invariantly measure expanding on its chain recurrent set CR(f) and has the eventually shadowing property on CR(f), then f has the spectral decomposition. Moreover we show that f is invariantly measure expanding on X if and only if its restriction on CR(f) is invariantly measure expanding. Using this, we characterize the measure expanding diffeomorphisms on compact smooth manifolds via the notion of Ω-stability.

• Journal of Powder Materials
• /
• v.9 no.3
• /
• pp.153-160
• /
• 2002

A nitrogen gas atomized aluminum powder was consolidated by powder-in sheath rolling method. A pure aluminum tube with outer diameter of 12 mm and wall thickness of 1mm was used as a sheath. The aluminum tube filled with the aluminum powder, first, was cold-rolled to the thickness of 6mm for performing, and then consolidated by the cold rolling and/or subsequent hot rolling at 360, 460 and $560^{\circ}C$. The aluminum powder compact fabricated by the sheath rolling showed high relative density more than 0.96 at any rolling conditions. The 0.2% proof stress increased with increasing hot rolling reduction and hot rolling temperature. Tensile strength was hardly affected by change in the hot rolling reduction, whereas it decreased with increasing hot rolling temperature. The powder compact showed the large elongation when cold rolling or hot rolling reduction was large. It was found that the sheath rolling was an effective method for consolidation of aluminum powder.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.43-47
• /
• 2001

A compact size microstrip antenna element using FR-4 substrate is proposed for use in repeater and base stations. Two stacked patches are aperture-coupled by two split feedlines. Rectangular stubs on the split feedlines are laid under the aperture and have the effect of considerably lowing the magnitude of $S_{11}$ [dB] and broadening impedance bandwidth. The designed structure has been fabricated and measured. Based on 20 dB, the return loss bandwidth is about 16.8% (1.86 GHz~2.20 GHz), which covers the frequency range assigned for IMT-2000 with a large margin. The overall dimension of the proposed antenna structure is 37 mm$\times$41 mm$\times$19mm (very compact). The antenna gain is more than 7.5 dBi over the required frequency range.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.14-19
• /
• 2015

Recently, water sewage disposal facilities are able to manage real-time data collection and record management through compact broadband modem LAN switching technology. Therefore, it needs more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed short distance wireless communication network of compact broadband modem for sewage disposal facilities. And it received data inside of water treatment facility using the two communication methods (IEEE802.11x and IEEE802.15.4x). Then, our proposed an data-flow control algorithm of wireless network technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.4
• /
• pp.217-224
• /
• 2009

Most divide-and-conquer implementations for Delaunay triangulation utilize quad-edge or winged-edge data structure since triangles are frequently deleted and created during the merge process. How-ever, the proposed divide-and-conquer algorithm utilizes the array based data structure that is much simpler than the quad-edge data structure and requires less memory allocation. The proposed algorithm has two important features. Firstly, the information of space partitioning is represented as a permutation vector sequence in a vertices array, thus no additional data is required for the space partitioning. The permutation vector represents adaptively divided regions in two dimensions. The two-dimensional partitioning of the space is more efficient than one-dimensional partitioning in the merge process. Secondly, there is no deletion of edge in merge process and thus no bookkeeping of complex intermediate state for topology change is necessary. The algorithm is described in a compact manner with the proposed data structures and operators so that it can be easily implemented with computational efficiency.

• Journal of the Korean Ceramic Society
• /
• v.31 no.4
• /
• pp.347-358
• /
• 1994

Creep densification and grain growth of alumina powder compacts during high temperature processing were investigated. The creep densification and grain growth of alumina powder compacts during various sintering processes were analyzed by employing the consitutive model by Kwon and Kim. Theoretical results from the constitutive model were compared with various experimental data of alumina powder compacts in the literature including pressureless sintering, sinter forging and hot pressing. The proposed constitutive equations were implemented into finite element analysis program (ABAQUS) to simulate densification for more complicated geometry and loading conditions. The effects of friction between die and powder compact or punch and powder compact during sinter forging and hot pressing are investigated by using the finite element method. Also, high temperature forming processing of alumina compact with complicated shape was simulated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.450-457
• /
• 2012

In this paper, we designed low phase noise frequency synthesizer with compact size for High frequency band (Ku-band). The paper addresses merits and demerits of single loop and dual loop frequency synthesizer. The phase noise characteristics of the phase-locked loop frequency synthesizer were predicted based on the analysis for phase noise contribution of noise sources. The proposed model in this paper more accurately predicts the low phase noise frequency synthesizer with compact size for high frequency band.