• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.39-44
• /
• 2004

The present paper gives a review of the recent development of a differential mobility analyzer (DMA) available for both particle size measurements and production of monodisperse particles in the nanometer range. Operating principles of a general DMA are introduced as well as characteristics of highly functional DMAs such as those capable of classifying particles in a measurement range as broad as 1-1000nm at low pressures. Some examples of DMA applications are also described.

• 설비공학논문집
• /
• 제13권4호
• /
• pp.289-294
• /
• 2001

A well defined electro-spraying and electro-static precipitator(ESP) experiment is carried out to investigate the charging characteristics of the submicron particles and the monodisperse particles. The basic idea is that the highly charged electro-sprayed droplets will be produced into the gas when the Coulombic repulsive force on the surface is higher than the surface tension of the spraying liquid. During this process many highly charged smaller droplets or ions, if the droplets are completely dried out, will be produced in the space. These charged species will be attached ion the particles and then eventually charge the particles. These charged particles will be easily collected with ESP. The experimental results show that the atomizer generated particles with geometric mean diameter (GMD) of 62nm are charged more than 90% even at the mean face velocity of 2.5m/s at the charging zone.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.677-684
• /
• 2003

A new unipolar aerosol charger was developed by using an indirect photoelectric charging. The charger consists of two coaxial tubes, the inner UV lamp wrapped with stainless mesh and the outer Al cylinder. In this study, the effects of flow rate, particle size, and electric field were examined to search the optimal charging conditions with experimental and numerical methods. Monodisperse NaCl particles were fed into an annular space and the particles were charged by negative ions generated from Al plate exposed to the UV light. According to experimental results, the average number of elementary charge on particles increases from 2.5 to 5.5 as particle size increases from 50nm to 130nm at 2.5 L/min and 100V. The average number of elementary charge on particles was maximized at 25V as the electric potential between the stainless mesh and Al plate was varied from 0V to 400V.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.159-166
• /
• 2012

We have introduced the Pickering emulsion systems to generate novel confining geometries for the selforganization of monodisperse polymer microspheres using nanoparticle-stabilized emulsion droplets encapsulating the building block particles. Then, through the slow evaporation of emulsion phases by heating, these microspheres were packed into regular polyhedral colloidal clusters covered with nanoparticle-stabilizers made of silica. Furthermore, polymer composite colloidal clusters were burnt out leaving nonspherical hollow micro-particles, in which the configurations of the cluster structure were preserved during calcination. The selfassembled porous architectures in this study will be potentially useful in various applications such as novel building block particles or supporting materials for catalysis or gas adsorption.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.347-357
• /
• 2018

Steady shear response of a magnetorheological fluid (MRF) system containing porous mono-disperse magnetite ($Fe_3O_4$) spheres synthesized by solvothermal method is demonstrated. In applied magnetic field the interaction between the spherical particles leads to form strong columnar structures enhancing the yield strength and viscosity of the MRFs. The yield strengths of the MRFs also scale up with the concentration of magnetic particles in the fluid. Considering magnetic dipolar interaction between the particles the magneto-mechanical response of the MRFs is explained. Unlike metallic iron particles, the low-density corrosion resistant soft-ferrimagnetic $Fe_3O_4$ spherical particles make our studied MRF system efficient and reliable for shock-mitigation/vibration-isolation applications.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.225-232
• /
• 2004

We have successfully synthesized relatively monodisperse and cross-linked melamine-formaldehyde (M-F) microspheres by dispersed polycondensation and subsequent pH adjustment with serum replacement cleaning. The average particle sizes (equation omitted): weight-average and (equation omitted) : number-average), the polydispersity index (equation omitted), the number of particles N$\_$p/ and the gel content of the M-F microspheres were observed by varying the pH, the surfactant concentration, and the polymerization temperature. We observed that both the pH and the polymerization temperature were predominant factors in determining (equation omitted) and N$\_$p/, but the effect that the temperature and pH had on the gel content ( ＞ 94% for all samples) was negligible. The exponents of the slopes of plots of N$\_$p/ versus pH and surfactant concentration were －10 and 0.6, respectively. Particle nucleation and growth were achieved within short periods; the incessant coagulation occurred even in the presence of surfactants.

• 공업화학
• /
• 제7권4호
• /
• pp.777-786
• /
• 1996

Seed 중합 방법에 의하여 단분산성 다공의 폴리아크릴로니트릴-에틸렌글리콜 디메타크릴레이트 (PAN) 고분자 마이크로 겔이 제조되었다. PAN 마이크로 겔의 물리적인 특성을 모노머/seed와 희석제/모노머의 비율, 가교제의 농도 및 희석제의 종류에 따라 연구하였다. PAN 마이크로 겔의 입도 분포는 모노머/seed의 비율이 50 이하 일 때 단분산성을 나타냈으며, 가교제의 농도가 증가할수록 입자 내부의 미소 구체 (microsphere)의 크기가 작아져 더욱 밀집된 형태를 나타내기 때문에 입자의 비표면적이 증대되었다. 또한 희석제로 톨루엔을 사용하고 희석제/모노머의 비율이 1.0일 때 입자표면의 세공이 가장 발달되었다.

• 멤브레인
• /
• 제29권1호
• /
• pp.61-65
• /
• 2019

이방성 입자는 독특한 물리적 특성 때문에 다양한 분야에서 발표되고 있다. 여기서, 이방성 도토리구조 나노 입자를 제조하기 위해 새로운 동적 상분리 방법이 도입된다. 동적 상분리 방법은 용제 증발 및 무용제에 의한 침전으로 구성된다. 하부층은 비용매 희석제로서 물을 공급함으로써 제어되며, 상부층의 상분리는 휘발성 용매의 확산 및 증발에 의존한다. 이 상태에서, 도토리 형 입자가 제조되었다. 물이 채워진 밀폐된 상자(자발적 상분리)하에서, 단분산 폴리스틸렌 입자가 합성되었다. 동적 상분리와 자발적 상분리가 공존할 때, 캡과 입자의 크기가 변경되었다. 또한, 폴리스틸렌 용액의 부피는 입자 형상에 영향을 미친다. 독특한 구조가 다양한 응용 분야에 활용될 수 있기 때문에 멤브레인 기반의 제어된 물 공급과 같은 첨단 기술이 개발되면 단분산의 도토리와 같은 입자가 제조될 수 있을 것이다.

• 청정기술
• /
• 제25권4호
• /
• pp.283-288
• /
• 2019

단분산성 마이크로입자는 약물캡슐화 및 전달을 위한 다양한 응용분야에서 사용되고 있다. 미세유체장치는 매우 균일한 액적을 생산할 수 있는 중요한 장치이며 이 액적은 단분산성 마이크로입자를 생성할 수 있는 중요한 템플레이트(template)로의 역할을 한다. 미세유체장치는 마이크론 크기의 채널로 구성되어 표면장력과 점성력 간의 균형을 정교하게 조절할 수 있으며, 이는 단분산성 액적을 형성하는 필수적인 기술 중의 하나이다. 본 연구는 유동집적채널 기반의 미세유체장치에서 매우 균일한 polycaprolactone (PCL) 생분해성 고분자 입자를 제조하는 방법을 제안한다. 유동집적채널 기반의 미세유체장치는 polydimethylsiloxane (PDMS) 기반의 소프트리소그래피(soft-lithography) 방법을 통해 제작된다. 액적 생성에서 중요한 요소는 마이크로 액적의 크기와 단분산성을 조절하는 것이다. 이를 위해, 본 연구에서는 이 미세유체장치에서 오일용액 분산상과 수용액 연속상의 부피유속을 제어하여 단분산성 액적 형성 조건을 최적화하였다. 그 결과 균일한 액적을 형성할 수 있는 dripping 영역에 대한 최척화된 유속조건을 확인하였다. 그런 다음, 마이크로입자를 생성하기 위해 PCL 고분자를 포함한 액적을 장치에서 형성한 후 용매의 증발에 의해 입자화 하였다. 입자의 크기는 부피유속과 미세유체채널의 크기에 의해 조절되며 입자의 단분산도는 변동계수(coefficient of variation, CV)값이 5% 이하로 제어될 수 있다.

• 한국대기환경학회지
• /
• 제15권6호
• /
• pp.799-804
• /
• 1999

Particle collection characteristics of the MOUDI cascade impactor has been studied for coarse particles in the range of 2 to 20$mu extrm{m}$ in aerodynamic diameter. A vibrating orifice aerosol generator was empolyed to generate monodisperse test aerosols. The oleic acid and sodium chloride(NaCl) particles were used as test aerosols. Aluminum foil and Teflon filter were selected as impaction media. The sampling flow rate was changed from 25 to 35L/min. Particle collection efficiency for single stage was examined for liquid particles. The stage response was obtained experimentally for the cascade impactor composed of three stages and a backup filter. The results showed that most of particle collection efficiencies measured in this work are similar to the efficiency curves obtained by Marple et al.(1991). For particles less than cut-off size of the stage, the collection efficiencies of solid particles are similar to those of loquid particles. However, the collection efficiency of solid particles decreases with mereasing particle diameter for the particles greater than the actual cut-off size of the impactor. The particle collection efficiency increases with increasing sampling flow rate at the same particel size. However, the collection efficiency curves seem not to be greatly shifted with the flow rate. The stage responses obtained by direct measurements in this work are in good agreement with those derived from the collection efficiency curves for single stage.