• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.43-57
• /
• 2022

Advances in measurement techniques have reduced measurement costs and enhanced safety resulting in less uncertainty. For example, an acoustic doppler current profiler (ADCP) based suspended sediment concentration (SSC) measurement technique is being accepted as an alternative to the conventional data collection method. In Korean rivers, horizontal ADCPs (H-ADCPs) are mounted on the automatic discharge monitoring stations, where SSC can be measured using the backscatter of ADCPs. However, automatic discharge monitoring stations and sediment monitoring stations do not always coincide which hinders the application of the new techniques that are not feasible to some stations. This work presents and analyzes H-ADCP-SSC models for 9 discharge monitoring stations in Korean rivers. In application of the Gaussian mixture model (GMM) to sediment-related variables (catchment area, particle size distributions of suspended sediment and bed material, water discharge-sediment discharge curves) from 44 sediment monitoring stations, it is revealed that those characteristics can distinguish sediment monitoring stations regionally. Linking the two results, we propose a protocol determining the H-ADCP-SSC model where no H-ADCP-SSC model is available.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.1
• /
• pp.38-51
• /
• 2000

This study seeks to present creation techniques increasing biodiversity while excluding techniques that avoid rooftop as a place for revegetation or techniques that are standardized and ecologically undesirable. To this end, a theoretical study was conducted including the identification of issues that need to be considered in introducing biotope creation techniques at a rooftop space using eco-pond or eco-park creation techniques. Based on the result, a creation process and techniques were presented for the rooftop of Kyungdong Energy Company building located in Bundang, Sungnam city. The conclusions reached in this study are as follows. First, when structural problems such as load or leakage are resolved and when it is planned as a habitat within a range of carrying load, a rooftop may be habitats for various organisms. Second, same creation techniques for eco-ponds or eco-parks may be applied to create biotope in a rooftop. In fact, the introduction of a wetland ecosystem on a rooftop may contribute significantly in increasing biodiversity. In addition, it would be desirable to approach traditional rooftop revegetation methods in an ecological aspect and to introduce indigenous plants and to offer habitats to insects and birds. Third, in order to create rooftop biotope, there should be enough studies and experiments on resolving structural problems and on techniques or technologies to create habitats. Since the Kyongdong Energy Company rooftop biotope described in this study is the first experimental site in Korea, it requires a series of process to identify problems and to improve them by monitoring the site in the future. Through such studies and experiments, efficient rooftop biotope creation techniques should be developed and disseminated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1884-1887
• /
• 1997

The increasing concern over radiation exposure in the nuclear industry has fostered agrressive efforts to reduce the levels of radiation exposure. One area of the effot to reduce the radiation exposure is the development of a remote radiation monitoring system. Remote radiation monitoring can serve many benificaial functions reduce exposure to radiation by plant personnel, impruve the quality of the data that is collected and recognize the radiation environment easily. Radiation mapping system gives a good information that represents radiation level distribution. The system we have developed consists of a data acquistion parts, mobile robot and remote control parts. Data acquisition parts consist of radiation detection module and vision acquistion module which collect radiation data, visiion data and distance information. In remote control parts, the acquision data are processed and displayed. We have constructed radiation mapping image by overlaying the vision and radiation data. The radiation mapping techniques for displaying the results of the survey in an easily comprehendable form will facilitate a better understanding of the radiation environment in the facility. This system can reduce workers radiation exposure and aid to help work plan, so it has significant benifits in cost and safety.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.850-852
• /
• 2004

The usable output of glassware formation production line depends, among other factors, on the weight and shape of a lump of hot molten glass called a gob. In this paper, an automated image processing system for monitoring gob weight and shape on a production line is proposed. Present techniques often rely on manual weighing of gobs on a sample basis by manually controlling the gob feeder. The proposed automated image monitoring system checks the weight and shape of every free-falling gob before it reaches the mould. In this system, the estimated weight of the gob is sufficiently close to its actual weight.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.37-41
• /
• 2005

The curing of thermoset resin is accompanied with the changes in chemical and physical properties. The cure monitoring techniques can be designed by tracing these property changes. This paper presents the cure monitoring technique with fiber optic sensors to detect the change of refractive index during the polymerization process of engineering epoxy resin. The fiber optic sensor system was developed to measure the reflection coefficient at the interface between the fiber optic and the resin. The correlation between the sensor output and the degree of cure was performed following Lorentz-Lorenz law. The isothermal data from the sensors are compared with the data from differential scanning calorimeter.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.162-169
• /
• 2009

The real-time traffic data is generated continuous and unbounded stream data type while intelligent transport system (ITS) needs to provide various and high quality services by combining with spatial information. Traditional database techniques in ITS has shortage for processing dynamic real-time stream data and static spatial data simultaneously. In this paper, we design and implement an advanced traffic monitoring system (ATMS) with the integration of existed data stream management system (DSMS) and spatial DBMS using IntraMap. Besides, the developed ATMS can deal with the stream data of DSMS, the trajectory data of relational DBMS, and the spatial data of SDBMS concurrently. The implemented ATMS supports historical and one time query, continuous query and combined query. Application programmer can develop various intelligent services such as moving trajectory tracking, k-nearest neighbor (KNN) query and dynamic intelligent navigation by using components of the ATMS.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.6
• /
• pp.373-379
• /
• 2006

Vibration-based structural health monitoring is one of non-destructive evaluation (NDE) techniques for civil infrastructures. This paper presents a novel fiber optic accelerometer system to monitor civil engineering structures and a successful application of the novel sensor system for measuring ambient vibration of a real building structure. This sensor system integrates the Moire fringe phenomenon with fiber optics to achieve accurate and reliable measurements. The sensor system is immune to electromagnetic (EM) interference making it suitable for difficult applications in such environments involving strong EM fields, electrical spark-induced explosion risks, and cabling problems, prohibiting the use of conventional electromagnetic accelerometers. A prototype sensor system has been developed, together with a signal processing software. The experimental studies demonstrated the high-performance of the fiber optic sensor system. Especially, the sensor was successfully used for monitoring a real building on UCI (University of California Irvine, USA).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.95-100
• /
• 1991

From a manufacturing standpoint it would be desirable to monitor the degradation of drawing die, that is essential for the maintenance of quality, the evaluation of product integrity and the reducing scrap. Acoustic emission is powerful method in monitoring fine wire drawing process, especially in detecting the die fracture at early stage. Experiments at so suggested that acoustic emission signals contained valuable information regarding the stage of a drawing process such as the surface appearance of products and the condition of lubrication. Using these informations makes AE monitoring techniques a possible tool in monitoring the drawing process operation. In order to approach this, this paper discusses the nature of acoustic emission signals produced in drawing process under various conditions. Experimental results are presented which illustrate the effects of wire and die material, lubricants, and drawing speed on the generation and the mean voltage level of acoustic emission signals. The results from these tests give controlling factors of acoustic emission generation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.7 no.1
• /
• pp.42-50
• /
• 1987

Most of significant defects in the pressure boundaries of nuclear power plant we re dispositioned to be monitored periodically every inservice inspection. Due to the difficulty of the defect sizing during operation, it is necessary to develope the continuous flaw monitoring techniques. The Tip Diffraction method, specifically speaking, spot seems to be suitable for flaw monitoring. The optimum conditions of selecting the transducer were 3.5 MHz and 45-57 degree according to compatibility with the defect height. The effective calculation of the defect height was to assume the fact that the incident beam is parallel. This method would be supplemented to ASME method about the defect characterization for the surface flaw.

• Smart Structures and Systems
• /
• v.13 no.1
• /
• pp.155-171
• /
• 2014

Various monitoring techniques are now available for structural health monitoring and Acoustic Emission (AE) is one of them. One of the major advantages of the AE technique is its capability to locate active cracks in structural members. AE crack locating approaches are affected by the signal attenuation and dispersion of elastic waves due to inhomogeneity and geometry of reinforced concrete (RC) members. In this paper, a novel technique is described based on signal processing and sensor arrangement to process multisensory AE data generated by the onset and propagation of cracks and is validated with experimental results from an in-situ load test. Considering the sources of uncertainty in the AE crack location process, a methodology is proposed to capture and locate events generated by cracks. In particular, the relationship between AE events and load is analyzed, and the feasibility of using the AE technique to evaluate the cracking behavior of two RC slab strips during loading to failure is studied.