• Structural Monitoring and Maintenance
• /
• 제5권1호
• /
• pp.93-110
• /
• 2018

In order to provide a novel strategy for long-span bridge health monitoring system design, this paper proposes a novel ultimate bearing capacity ratios based bridge internal force monitoring design method. The bridge ultimate bearing capacity analysis theories are briefly described. Then, based on the ultimate bearing capacity of the structural component, the component ultimate bearing capacity ratio, the uniformity of ultimate bearing capacity ratio, and the reference of component ultimate bearing capacity ratio are defined. Based on the defined indices, the high bearing components can then be found, and the internal force monitoring system can be designed. Finally, the proposed method is applied to the bridge health monitoring system design of the second highway bridge of Wuhu Yangtze river. Through the ultimate bearing capacity analysis of the bridge in eight load conditions, the high bearing components are found based on the proposed method. The bridge internal force monitoring system is then preliminary designed. The results show that the proposed method can provide quantitative criteria for sensors layout. The monitoring components based on the proposed method are consistent with the actual failure process of the bridge, and can reduce the monitoring of low bearing components. For the second highway bridge of Wuhu Yangtze river, only 59 components are designed to be monitored their internal forces. Therefore, the bridge internal force monitoring system based on the ultimate bearing capacity ratio can decrease the number of monitored components and the cost of the whole monitoring system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.43-45
• /
• 2004

A remote monitoring system was developed to improve inconveniences of manual work such as monitoring street lights by using current sensors, microprocessor and RF communication system. In order to control the street lights on the roads effectively and monitor them in real time, we can attach current sensor to the street lights which monitors Lamp, the broken part and state of the Balast, and the amount of an electric leak precisely we developed a system which makes it possible to transmit the data on monitoring results in breakdown of street lights and Balasts to the central monitoring computer without setting up extra data transmission line. The system we devised can transmit data through Power Line Modem and RF communication using relay method to the central controlling computer without any loss of data.

• 음성과학
• /
• 제9권3호
• /
• pp.99-112
• /
• 2002

The purpose of the present study was to investigate the effectiveness of self-monitoring on spontaneously initiating speech behavior of the hearing-impaired preschoolers. Three hearing-impaired preschoolers were selected from a special school for the deaf. They showed some vocalizations and words under intensive instruction settings, but never spontaneously spoke as a means of communication. Multiple probe design was applied in this study. During the self-monitoring intervention, each child was trained to assess whether his own initiating speech behavior was occurred or not, and then record his own behavior's occurrence on the self-recording sheets and self-graphing sheets. The vibration of handphone was used as a tactile cue for self-monitoring. The results of the present study were as follows: (1) self-monitoring significantly increased the percentage of occurrence of spontaneously initiating speech behaviors. (2) Increased level of spontaneously initiating speech behavior were generalized into another natural instruction (cognitive) settings. (3) Increased level of spontaneously initiating speech behavior were maintained after four weeks from the termination of the intervention.

• 대한가정학회지
• /
• 제35권6호
• /
• pp.143-155
• /
• 1997

The purpose of this study is to compare the differences of clothing behavior by the level of self-monitoring under given social situations. The result of this study is drown from the analysis of the survey, gathered from the 522 female students of universities reside in Seoul, by using the method of convenience sampling. The statistical methods used to test the data were MANOVA and chi-square test. The results of this study can be summarized s follows; first, as a result of analyzing the differences of situational self-image pursuits among situations depending individual's self-monitoring levels, it was found that the pursuits changes among situations regardless of the self-monitoring levels. Thus, this hypothesis could not be verified. Second, as a result of analyzing the changes of priority of clothing selection factors among situations depending on individual's self-monitoring levels, it was found that the priority factors changed among situations regardless of the self-monitoring levels.

• 대한음성학회지:말소리
• /
• 제51호
• /
• pp.57-69
• /
• 2004

Comprehension monitoring is a process of message evaluation and a very important skill of communication. Comprehension monitoring is a necessary language skill in classroom, as it is important for children to assess their own understanding of task instructions and teaching content. The present study investigated comprehension monitoring skill of children with Specific Language Impairment(SLI) compared to age-matched children and language-matched children. 18 vignettes and 6 displays were constructed. Children were asked to choose one object or 'DK' card from a display after the children listened to the vignettes. The results showed that children with SLI didn't have problem in comprehending unambiguous utterance and using prior statement. However, they had problem in monitoring comprehending ambiguous utterance compared age-matched children. Their performance were similar to language matched younger children. With respect to their performance, several possible explanations were discussed.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.82-87
• /
• 2000

This paper deals with monitoring of grinding wheel wear in grinding process. A monitoring system is developed in which a laser scanning micrometer is used to measure the circumferential shape as well as the axial shape of grinding wheel. The monitoring system is applied to grinding machines. The experiment results show that the monitoring system is useful not only for monitoring the amount of wear in grinding wheel but also for measuring the apparent diameter of the grinding wheel.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 하계학술대회
• /
• pp.32-35
• /
• 2010

This paper presents an efficient monitoring method of a network protocol for a downloadable conditional access system (DCAS) that can securely transmit conditional access software via a bi-directional communication channel. In order to guarantee a secure channel based on mutual authentication between a DCAS head end server and set-top boxes, DCAS messages are encrypted and digitally signed. Owing to applied cryptographic algorithms, it is impossible to get information from messages directly without additional processing. Through categorizing DCAS messages into several groups, the proposed monitoring method can efficiently parse and trace DCAS messages in real-time. In order to verify the stability and effectiveness of the proposed monitoring method, we implement a DCAS monitoring system capable of capturing and parsing all DCAS messages. The experimental results show that the proposed monitoring method is well designed.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.158-162
• /
• 2010

PSD is automatically opened and closed when subway train arrive on the station. This system was designed to control electric automatic system. These doors will provide passenger safety, energy saving and a good environment in subway. The monitoring and control systems of PSD are configured so that they can be operated in automatic mode in connection with ATO through the composite control panel in the station control room. The objective of this paper is to obtain high reliability that is essential for monitoring and control systems of PSD. The power supply is based on protection circuit using DC power bridge from two UPS. Also, stable communication system consists of CAN communication line redundancy and RF cross protection algorithm. Monitoring state display results show the validity of the proposed high reliability monitoring and control systems of PSD.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.81-86
• /
• 2001

This paper deals with the monitoring of grinding wheel wear in surface grinding process. A monitoring system, which makes use of a laser scanning micrometer, is developed to measure the circumferential shape as well as the axial profile of grinding wheel. The monitoring system is applied to surface grinding processes. The experimental results show that the developed monitoring system is useful not only for monitoring the amount of wear in grinding wheel but also for evaluation the quality of ground surface and determining proper derssing time for the grinding wheel.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.254-262
• /
• 2008

The objective of the proposed study is to produce a tool-condition monitoring (TCM) strategy that will lead to a more efficient and economical drilling tool usage. Drill-wear monitoring is an important attribute in the automatic cutting processes as it can help preventing damages of the tools and workpieces and optimizing the tool usage. This study presents the architectures of a multi-layer feed-forward neural network with back-propagation training algorithm for the monitoring of drill wear. The input features to the neural networks were extracted from the AE signals using the wavelet transform analysis. Training and testing were performed under a moderate range of cutting conditions in the dry drilling of steel plates. The results indicated that the extracted input features from AE signals to the supervised neural networks were effective for drill wear monitoring and the output of the neural networks could be utilized for the tool life management planning.