• Advances in aircraft and spacecraft science
• /
• v.8 no.1
• /
• pp.53-67
• /
• 2021

The increasing interest in the exploration of Mars stimulated the authors to study aerodynamic problems linked to space vehicles. The aim of this paper is to evaluate the aerodynamic effects of a flapped wing in collaborating with parachutes and retro-rockets to reduce velocity and with thrusters to control the spacecraft attitude. 3-D computations on a preliminary configuration of a blunt-cylinder, provided with flapped fins, quantified the beneficial influence of the fins. The present paper is focused on Aerodynamics of a wing section (NACA-0010) provided with a trailing edge flap. The influence of the flap deflection was evaluated by the increments of aerodynamic force and leading edge pitching moment coefficients with respect to the coefficients in clean configuration. The study was carried out by means of two Direct Simulation Monte Carlo (DSMC) codes (DS2V/3V solving 2-D/3-D flow fields, respectively). A DSMC code is indispensable to simulate complex flow fields on a wing generated by Shock Wave-Shock Wave Interaction (SWSWI) due to the flap deflection. The flap angle has to be a compromise between the aerodynamic effectiveness and the increases of aerodynamic load and heat flux on the wing section lower surface.

• Structural Engineering and Mechanics
• /
• v.82 no.1
• /
• pp.31-40
• /
• 2022

In structural engineering, the material properties of the structures such as elastic modulus, shear modulus, density, and size may not be deterministic and may vary at different locations. The dynamic response analysis of such structures may need to consider these properties as stochastic. This paper introduces a stochastic finite element method (SFEM) approach to analyze moving loads problems. Firstly, Karhunen-Loéve expansion (KLE) is applied for expressing the stochastic field of material properties. Then the mathematical expression of the random field is substituted into the finite element model to formulate the corresponding random matrix. Finally, the statistical moment of the dynamic response is calculated by the point estimation method (PEM). The accuracy and efficiency of the dynamic response obtained from the KLE-PEM are demonstrated by the example of a moving load passing through a simply supported Euler-Bernoulli beam, in which the material properties (including elastic modulus and density) are considered as random fields. The results from the KLE-PEM are compared with those from the Monte Carlo simulation. The results demonstrate that the proposed method of KLE-PEM has high accuracy and efficiency. By using the proposed SFEM, the random vertical deflection of a high-speed railway (HSR) bridge is analyzed by considering the random fields of material properties under the moving load of a train.

• Journal of Mechanical Science and Technology
• /
• v.17 no.3
• /
• pp.380-390
• /
• 2003

This paper addresses the problem of the modeling and vibration control of tapered rotating blade modeled as thin-walled beams and incorporating damping capabilities. The blade model incorporates non-classical features such as anisotropy, transverse shear, secondary warping and includes the centrifugal and Coriolis force fields. For the rotating blade system, a thorough validation and assessment. of a number of non-classical features including the taper characteristics is accomplished. The damping capabilities are provided by a system of piezoactuators bonded or embedded into the structure and spread over the entire span of the beam. Based on the converse piezoelectric effect, the piezoactuators produce a localized strain field in response to a voltage and consequently, a change of the dynamic response characteristics is induced. A velocity feedback control law relating the piezoelectrically induced transversal bending moment at the beam tip with the appropriately selected kinematical response quantity is used and thebeneficial effects upon the closed-loop dynamic characteristics of the blade are highlighted.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.3
• /
• pp.17-22
• /
• 1986

This paper investigates on the performance of liquid magnetic compass measuring the concomitant angle of the directional system by the kind of compass and the coefficiant of viscosity of the liquid of ones in accordance with the turning angular velocity of the compass bowl in artificial horizontal magnetic fields. The obtained results are as follows; 1. The concomitant angle is to be in proportion to the coefficiant of viscosity of the liquid of compass and the turning angular velocity of the compass bowl, but ones is to be in contrary proportion to the magnetic moment of the magnetic needle and the horizontal geomagnetic. 2. The overdevelopment of the concomitant angle keeps on regularly at any optional degree in the turning angular velocity over$\pi$ radian per minute, but varies periodically at 180 degree below 3 $\pi$ radian per minute.

• Journal of Environmental Science International
• /
• v.7 no.4
• /
• pp.511-522
• /
• 1998

The two-stage numerical model was used to study the relation between three-dimensional local wind seal area for Korean peninsula. The first stave is three dimensional time-dependent local wind model which elves the wind field and vertical diffusion coefncient. The second stage is advection/duusion model which uses the results of the first stage as input data. First, wand fields on Korean peninsula for none synoptic scale wand showed typical land and sea breeze circulation, and the emitted particles were transported by sea breeze for daytime, emissions return to sea by land breeze for nighttime.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1465_1466
• /
• 2009

Power cable of an AC arc welder can surround a body of worker at the moment of welding. Applying the boundary element method, we calculated current densities induced in organs inside a worker in case he weared a multi-layer shielding cloth. We know these were lowest when high permeability materials such as silicon and permalloy were applied to the interior of a suit and high conductivity materials such as copper were to the exterior.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.2
• /
• pp.110-115
• /
• 2006

In pure P2P environment, it is possible to provide service by using a little real-time information without using accumulated information. But in case of using only a little information that was locally collected, quality of recommendation service can be fallen-off. Therefore, it is necessary to study a method to improve qualify of recommendation service by using users' context information. But because a great volume of users' context information can be recognized in a moment, there can be a scalability problem and there are limitations in supporting differentiated services according to fields and items. In this paper, we solved the scalability problem by clustering context information per each service field and classifying it per each user, using SOM. In addition, we could recommend proper services for users by quantifying the context information of the users belonging to the similar classification to the service requester among classified data and then using collaborative filtering.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.7-12
• /
• 2000

As the offshore oil fields are moved to the deep ocean, the oil production systems of FPSO(Floating production storage and offloading system) are building these days and so it is the most important to estimate the drift motion and damping effects the drift motion importantly. The components of damping consist of viscous, wave radiation effect and wave drift damping. It is need to estimate the wave drift damping exactly among them. The wave drift damping means the change rate of mean wave drift force with respect to the ship and ocean structures speed. In order to calculate this, the 3-Dimensional panel method used to translating and pulsating Green function is adopted. The calculation is carried out for series 60(CB = 0.7) vessel and the results are compared with other theoretical ones.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.05a
• /
• pp.30-35
• /
• 1999

Recently, many companies want to accept and operate ERP(Enterprise Resource Planning) system in their fields ERP does not only include business, but also include finance, account, trade, personnel and BPR(Business Process Reengineering). Especially, it is necessary to have ERP system for companies which have lots of external businesses such as trade and communication sector. In modern society, the manufacture field faces on variable chances of Environment. For this situation, the application of Information technique is one of the main point maintain competitive power. The company should chose a proper method for their future and build Unified Information System on its suitable situation. Nowadays, Adjustment and application of technical method for Internet/Intranet and raised and more advanced Extranet gains its force at the moment. The Unification of ERP and POP system under the distributed environment like this will have a huge influence to us. In this subject, I will think about POP system for operating EPR system and improve its defects that can operate more effective sales, circulation, demand plan. Also, I suggest a proper POP system can handle seperated resources in each part of factory for a plan of shot period, order operating, factory inventory, process control.

• Coupled systems mechanics
• /
• v.2 no.1
• /
• pp.111-126
• /
• 2013

The structural design requirements of an offshore platform subjected to wave induced forces and moments in the jacket can play a major role in the design of the offshore structures. For an economic and reliable design; good estimation of wave loadings are essential. A nonlinear response analysis of a fixed offshore platform under structural and wave loading is presented, the structure is discretized using the finite element method, wave plus current kinematics (velocity and acceleration fields) are generated using 5th order Stokes wave theory, the wave force acting on the member is calculated using Morison's equation. Hydrodynamic loading on horizontal and vertical tubular members and the dynamic response of fixed offshore structure together with the distribution of displacement, axial force and bending moment along the leg are investigated for regular and extreme conditions, where the structure should keep production capability in conditions of the 1-yr return period wave and must be able to survive the 100-yr return period storm conditions. The result of the study shows that the nonlinear response investigation is quite crucial for safe design and operation of offshore platform.