• Journal of applied mathematics & informatics
• /
• 제37권5_6호
• /
• pp.491-506
• /
• 2019

In this paper, we show the existence and uniqueness of solution to stochastic differential equations under weakened $H{\ddot{o}}lder$ condition and a weakened linear growth condition. Furthermore, the properties of their solutions investigated and estimate for the error between Picard iterations $x_n(t)$ and the unique solution x(t) of SDEs.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.391-402
• /
• 1994

철근 콘크리트구조는 극한하중에서 연성파괴가 일어나도록 하는 것이 가장 중요한 설계개념의 하나이며 단면이 충분한 소성변형능력을 가지고 있을 때에는 한계상태설계법 개념을 도입하여 소성구조해석이나 모멘트 재분배를 수행하여 경제적인 단면을 설계할 수 있다. 따라서 휨연성지수는 설계된 철근 콘크리트 구조물의 휨거동을 예측하는데 뿐만 아니라 모멘트 재분배의 가능성을 판단하는데에도 이용된다. 그러나 휨연성지수 공식은 인장철근이 항복하는 순간의 곡률에 대하여 선형의 콘크리트 압축응력으로 가정하기 때문에 근사값의 휨연성지수를 계산하게 된다. 본 연구에서는 콘크리트와 철근의 응력-변형도 곡선을 이용한 수치해석으로 이론적 정해에 가까운 휨연성지수를 구하고 각 변수에 따른 휨연성지수의 변화와 공식의 오차, 복철근보의 최대철근량은 고찰함으로써 철근콘크리트 구조설계의 참고자료를 제공하고자 하며 모멘트 재분배에 관한 연구에 이용될 수 있는 철근 콘크리트 휨부재의 모멘트-곡률 곡선 모델을 제시하고자 한다.

• 대한토목학회논문집
• /
• 제28권4A호
• /
• pp.487-495
• /
• 2008

본 연구에서는 압출가설시 압출노즈와 가설거더 시스템의 거동에 대한 압출노즈의 휨강성비, 단위중량비 및 길이비의 영향을 살펴보고, 압출과정에서 발생하는 부모멘트 및 정모멘트를 최소화할 수 있는 압출노즈에 대한 최적조건을 도출하고자 하였다. 또한, 도출된 최적조건을 사용하여 압출노즈의 단위중량비와 길이비의 관계식을 유도하고 압출가설시에 발생하는 절대최대 정모멘트 및 부모멘트의 산정식을 제시하였으며, 연속거더교량의 압출가설시에 사용되는 압출노즈의 최적설계 방안을 제안하였다. 가장 이상적인 압출노즈의 설계는 절대최대 부모멘트를 최소화하면서 절대최대 정모멘트의 발생을 억제할 수 있는 단위중량비 0.167, 길이비 0.836을 적용한 경우임을 확인하였다.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.631-639
• /
• 2017

This study experimentally investigated the flexural capacity of a concrete beam reinforced with a newly developed GFRP bar that overcomes the lower modulus of elasticity and bond strength compared to a steel bar. The GFRP bar was fabricated by thermosetting a braided pultrusion process to form the outer fiber ribs. The mechanical properties of the modulus of elasticity and bond strength were enhanced compared with those of commercial GFRP bars. In the four-point bending test results, all specimens failed according to the intended failure mode due to flexural design in compliance with ACI 440.1R-15. The effects of the reinforcement ratio and concrete compressive strength were investigated. Equations from the code were used to predict the deflection, and they overestimated the deflection compared with the experimental results. A modified model using two coefficients was developed to provide much better predictive ability, even when the effective moment of inertia was less than the theoretical $I_{cr}$. The deformability of the test beams satisfied the specified value of 4.0 in compliance with CSA S6-10. A modified effective moment of inertia with two correction factors was proposed and it could provide much better predictability in prediction even at the effective moment of inertia less than that of theoretical cracked moment of inertia.

• Investigative Magnetic Resonance Imaging
• /
• 제4권1호
• /
• pp.20-26
• /
• 2000

Gradient moment nulling techniques require the introduction of an additional gradient on each axis for each order of motion correction to be applied. The additional gradients introduce new constraints on the sequence design and increase the demands on the gradient system. The purpose of this paper is to demonstrate techniques for optimization of gradient echo gradient moment nulling sequences within the constraints of the gradient hardware. Flow compensated pulse sequences were designed and implemented on a clinical magnetic resonance imaging system. The design of the gradient moment nulling sequences requires the solution of a linear system of equations. A Mathematica package was developed that interactively solves the gradient moment nulling problem. The package allows the physicist to specify the desired order of motion compensation and the duration of the gradients in the sequence with different gradient envelopes. The gradient echo sequences with first, second, and third order motion compensation were implemented with minimum echo time. The sequences were optimized to take full advantage of the capabilities of the gradient hardware. The sequences were used to generate images of phantoms and human brains. The optimized sequences were found to have better motion compensation than comparable standard sequences.

• Structural Engineering and Mechanics
• /
• 제55권2호
• /
• pp.379-398
• /
• 2015

Confinement is known to have important influence on ductility of high-strength concrete (HSC) members and it may therefore be anticipated that this parameter would also affect notably the moment redistribution in these members. The correctness of this "common-sense knowledge" is examined in the present study. A numerical test is performed on two-span continuous reinforced HSC beams with and without confinement using an experimentally validated nonlinear model. The results show that the effect of confinement on moment redistribution is totally different from that on flexural ductility. The moment redistribution at ultimate limit state is found to be almost independent of the confinement, provided that both the negative and positive plastic hinges have formed at failure. The numerical findings are consistent with tests performed on prototype HSC beams. Several design codes are evaluated. It is demonstrated that the code equations by Eurocode 2 (EC2), British Standards Institution (BSI) and Canadian Standards Association (CSA) can well reflect the effect of confinement on moment redistribution in reinforced HSC beams but the American Concrete Institute (ACI) code cannot.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.170.2-170
• /
• 2001

In this paper, the dynamic system modeling and the state sensitivity analysis of the spin-coater system for the reduction of the vibration are proposed. In the respect of modeling, the spin-coater system is composed of components of servomotor, belt, spindle, and a supported base. Each component is defined and combined modeling is derived to 3dimensional equations. Verification of modeling is verified by experimental values of actual system in the frequency domain. By direct differentiation the constraint equations with respect to kinematic design variables, such as eccentricity of spindle, moment of inertia, torsional stiffness and damping of supported base, sensitivity equations are derived to the verified state equations. Sensitivity of design variables could be used for vibration reduction and natural frequency shift in the frequency domain. Finally, dominant design variables ...

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.523-536
• /
• 2017

A layerwise (LW) formulation based on the Galerkin method is presented to investigate the three-dimensional stress state in long sandwich plate which is subjected to tension force and pure bending moment. Based on the Galerkin method and the LW discretization approach, the equilibrium equations of elasticity for the long plate are written in the weak form and discretized through the thickness of the plate. The discretized equations are written in terms of displacement components of the numerical layers. The governing equations of the plate are solved analytically for the free edge boundary conditions. The distribution of stress state especially the 3D stress state in the vicinity of the edges of the sandwich plate which is subjected to tension and pure bending is studied. In order to increase the accuracy, the out of plane stresses are obtained by integrating the equilibrium equations of elasticity. The convergence and accuracy of the predictions are studied and various numerical results are presented for distribution of the in-plane and out of plane stresses in symmetric and un-symmetric sandwich plates.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.209-217
• /
• 2003

In this paper, the dynamic system modeling and the state sensitivity analysis of the spin-coater system are proposed for the reduction of the vibration. In the respect of modeling, the spin-coater system is considered to be composed of servomotor, spindle, supporting base and so on. Each component of model is combined and derived to 3 dimensional equations. The combined model is verified by experimental values of actual system in the frequency domain. By direct differentiation of the constraint equations with respect to kinematic design variables, such as eccentricity of spindle, moment of inertia, rotational stiffness and damping of supported base, sensitivity equations are derived to the verified state equations. Sensitivity of design variables could be used for vibration reduction and natural frequency shift in the frequency domain. Finally, dominant design variables are selected from the sensitivity analysis.

• 대한수학회지
• /
• 제56권1호
• /
• pp.149-167
• /
• 2019

In this work, we study the existence, uniqueness and stability in the ${\alpha}$-norm of solutions for some stochastic partial functional integrodifferential equations. We suppose that the linear part has an analytic resolvent operator in the sense given in Grimmer [8] and the nonlinear part satisfies a $H{\ddot{o}}lder$ type condition with respect to the ${\alpha}$-norm associated to the linear part. Firstly, we study the existence of the mild solutions. Secondly, we study the exponential stability in pth moment (p > 2). Our results are illustrated by an example. This work extends many previous results on stochastic partial functional differential equations.