• 한국강구조학회 논문집
• /
• 제22권4호
• /
• pp.389-398
• /
• 2010

교량용 HSB 고성능 강재를 적용한 정모멘트부 강합성거더의 휨저항강도를 모멘트-곡률 해석법으로 산정하고 일반 강재에 적용되는 AASHTO LRFD 조밀단면 휨저항강도 설계식에 의한 휨저항강도와 비교하여 기존 설계식의 적용성을 검토하였다. 다양한 연성특성을 갖는 2,391개 단면을 임의추출법으로 선정하고 재료 비선형 모멘트-곡률 해석 프로그램을 이용하여 이들 단면에 대한 휨저항강도를 구하였다. 합성단면을 구성하는 콘크리트 재료는 CEB-FIP 모델로, HSB600 및 HSB800 강재는 탄소성-변형경화 재료로 모델링하였다. HSB 강재를 적용한 강합성거더 단면의 연성비와 콘크리트 바닥판의 압축강도에 따른 휨저항강도 특성을 분석하고 SM520-TMC 일반 강재를 적용한 경우와 휨저항강도를 비교하였다. 2,391개의 HSB600 강합성거더 단면의 휨저항강도를 분석한 결과, 기존 LRFD 휨저항강도 설계식을 적용할 수 있는 것으로 분석되었다. 반면에, HSB800 강재를 적용한 강합성거더의 경우에는 기존 LRFD 조밀단면 휨저항강도 설계식은 비안전측으로 평가되었으며, HSB800 강합성거더의 모멘트-곡률해석 결과에 근거한 새로운 정모멘트부 휨저항강도 산정식을 제안하였다.

• 한국지진공학회논문집
• /
• 제8권3호
• /
• pp.1-12
• /
• 2004

1989년 로마프리타지진 및 1995년 효고현 남부지진등 많은 교각에서 휨-전단 파괴에 의한 피해가 발생하였다. 그럼에도 불구하고 지금까지의 교각의 내진성능에 관한 연구는 대부분 휨파괴에 대한 연구가 지배적이었다. RC 교각의 내진성능은 교각의 소성힌지구간의 성능에 좌우되고 있으며, 소성힌지의 연성은 곡률에 의해 평가하는 것이 바람직하다. 실험연구는 지진하중의 손상을 입은 RC교각의 휨전단거동에 관한 소성힌지구간 내의 곡률변화를 평가하였다. 실험에 사용된 7기의 실험체는 형상비 2.5에 횡방향 구속력, 주철근의 겹침이음 그리고 섬유보강을 변수로 가지고 있다. 이 실험체는 유사동적실험 수행을 통해 손상을 주었으며, 유사동적실험 후에는 일정한 축력,$P=0.1f_{ck}A_g$을 유지하면서 변위제어방식으로 유사정적실험을 실시하여 잔류내진성능을 평가하였다. 실험 결과 기초에서 15cm 구간에 가장 큰 곡률이 발생하였으며 파괴도 이 단면에 집중되었다. 또한, 연성도 분석결과 주철근이 겹침이음 된 RC 교각이 낮은 곡률연성도를 보였으며, 이를 섬유보강한 실험체의 휨강성과 곡률연성도는 현저히 개선되었다. 그리고, 교각의 곡률변화를 분석하여 횡구속력을 고려한 등가소성힌지길이 산정식을 제안하였으며, 이 제안된 식을 적용하여 변위연성도와 곡률연성도 관계를 분석하였다.

• 대한토목학회논문집
• /
• 제12권4_1호
• /
• pp.87-96
• /
• 1992

철근 콘크리트 장주의 기하학적 비선형성을 고려한 최종 기둥모멘트는 일반적으로 모멘트확대법에 의하여 설계에 이용되고 있으나 더 정확한 해석법으로 P-${\Delta}$ 방법 등의 2차 구조해석이 추천되고 있다. 2차 구조해석의 정확도는 해석에 이용되는 기둥과 보 강성의 합리적 산정이 가장 중요한 요소이므로 철근 콘크리트 장주설계를 위한 보다 정확한 P-${\Delta}$ 해석의 지침으로, 이론적으로 구한 실제에 가까운 모멘트-곡률-축하중 상관관계로부터 등가(等價) 강성(剛性)을 산정하는 합리적 방법을 제시하고, 제안된 해석 방법을 실험결과와 비교함으로써 기존의 MacGregor-Hage의 2차 구조해석법, Furlong의 2차 구조해석법, 시방서의 모멘트확대법 등 3가지 해석 방법과 정확도를 비교 검토한다.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.59-69
• /
• 2020

The purpose of this study is to develop practical tools for the mechanical design of cylindrical porous media subjected to a broad gap in a hygrothermal environment. The planar axisymmetrical and transient hygrothermoelastic field in a porous hollow cylinder that is exposed to a broad gap of temperature and dissolved moisture content and is free from mechanical constraint on all surfaces is investigated considering the nonlinear coupling between heat and binary moisture and the diffusive properties of both phases of moisture. The system of hygrothermal governing equations is derived for the cylindrical case and solved to illustrate the distributions of hygrothermal-field quantities and the effect of diffusive properties on the distributions. The distribution of the resulting stress is theoretically analyzed based on the fundamental equations for hygrothermoelasticity. The safety hazard because of the analysis disregarding the nonlinear coupling underestimating the stress is illustrated. By comparing the cylinder with an infinitesimal curvature with the straight strip, the significance to consider the existence of curvature, even if it is infinitesimally small, is demonstrated qualitatively and quantitatively. Moreover, by investigating the bending moment, the necessities to consider an actual finite curvature and to perform the transient analysis are illustrated.

• Earthquakes and Structures
• /
• 제1권3호
• /
• pp.269-287
• /
• 2010

High-strength concrete (HSC) is becoming more popular in the construction of beams and columns of tall buildings because of its higher stiffness and strength-to-weight ratio. However, as HSC is more brittle than normal-strength concrete (NSC), it may adversely affect the flexural ductility and deformability of concrete members. Extended from a series of theoretical study conducted on flexural ductility of concrete beams, the authors would in this paper investigate the effects of some critical factors including the degree of reinforcement, confining pressure, concrete and steel yield strength on the flexural deformability of NSC and HSC beams. The deformability, expressed herein in terms of normalised rotation capacity defined as the product of ultimate curvature and effective depth, is investigated by a parametric study using nonlinear moment-curvature analysis. From the results, it is evident that the deformability of concrete beams increases as the degree of reinforcement decreases and/or confining pressure increases. However, the effects of concrete and steel yield strength are more complicated and dependent on other factors. Quantitative analysis of all these effects on deformability of beams has been carried out and formulas for direct deformability evaluation are developed. Lastly, the proposed formulas are compared with available test results to verify its applicability.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.27-38
• /
• 1996

A two-dimensional FEM program, which considers bending effects in the membrane fromulation, was developed under plane strain assumption for analyzing forming processes of an arbitrarily shaped draw-die of automotive panels. For the evaluation of bending effects with membrane elements, the bending equivalent forces and stiffnesses are calculated from the bending moment computed using the changes in curvature of the formed shape of two membrane ones. The curves depicted with 3 nodes are described by a circle, a quadratic equation, and a cubic equation, respectively, and in the simulation of the stretch/draw sections of an automotive inner panel, three different description results are compared each other. Also, the bending results are compared with membrane results and measurements in order to verify the validity of the developed program.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.709-717
• /
• 2004

The existing AASHTO Standard Specification have some inadequacies in expressing wheel load distribution of bridge which has specific shape of curved bridge instead of straight bridge. Thus, this research presented the finite element analysis and modelling technique of prestressed concrete girder bridge having curved slab and the expression of wheel load distribution was suggested as the ratio of bending moment utilizing the result of finite element analysis of prestressed concrete girder bridge having cowed slab. The considered parameter of girder distribution expression is the curvature of slab, span length, girder space, cross beam space and number of lanes. Though the suggested girder distribution expression is generally underestimated below AASHTO Standard Specification, once the curvature of slab increases, the suggested expression gets larger than AASHTO LRFD Standard Specification.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.169-176
• /
• 1999

An improved formulation for spatial stability md free vibration of thin-walled curved beams with variable curvature and non-symmetric cross sections are presented based on the displacement field considering the second order terms of finite semitangential rotations. By introducing Vlasov's assumptions, the total potential energy is derived from the principle of linearized virtual work for a continuum. In this formulation, all displacement parameters and the warping function are defined at the centroid axis so that the coupled terms of bending and torsion are added to the elastic strain energy. Also, the potential energy due to initial stress resultants is consistently derived corresponding to the semitangential rotation and moment. The cubic Hermitian polynomials are utilized as shape functions for development of the curved thin-walled beam element having eight degrees of freedom. In order to illustrate the accuracy and practical usefulness of this study, . numerical solutions for free vibration of arches are presented and compared with resells of other researchers and solutions analyzed by the ABAQUS's shell element.

• 소성∙가공
• /
• 제10권2호
• /
• pp.91-100
• /
• 2001

A sectional FEA program is developed lot analyzing forming processes of sandwich sheets, which are intensively used recently as a lightweight material of an automobile body. The aluminum sandwich sheet consists of two aluminum skins and a polyprophylen core in between. The aluminum sandwich sheet is dominantly effected by the bending effects in small radius of curvature, so that an appropriate description of bending effects is required to analyze the forming processes. For the evaluation of bending effects, the bending equivalent forces are calculated from the bending moment computed using the curvature of the tool and are added to the membrane stretch forces. To verify the validity of the developed program the sectional FEA results in stretch/draw forming Processes of a square cup and draw forming Processes of an outer hood panel were compared with the measurements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.121-126
• /
• 2003

The objective of this research is to evaluate of seismic performance for reinforced concrete bridge piers with lap splices of longitudinal reinforcement steels using predicting of nonlinear hysteric behavior. For the purpose, enhanced analytical trilinear hystretic model has been proposed to simulate the force-displacement hysteretic curve of RC bridge piers under repeated reversal loads. The moment capacity and corresponding curvature in the plastic hinge have been determined, and the enhanced hysteretic behavior model by five different kinds of branches has been proposed for modeling the stiffness variation of RC section under cyclic loading. The strength and stiffness degradation index are introduced to compute the hysteretic curve for various confinement steel ratios, In addition, the modified curvature factor has been introduced to forecast of seismic performance of longitudinal steel lap spliced and retrofitted specimens. The results of this research will be useful to predict of seismic performance for longitudinal steel with lap spliced and its retrofitted specimens.