• Journal of Integrative Natural Science
• /
• v.13 no.3
• /
• pp.87-91
• /
• 2020

Molybdenum carbide (MoC_x) thin films (TFs) were deposited by reactive radio frequency (rf) magnetron co-sputtering in high vacuum chamber. We compared the properties of MoC_x thin films as the rf power changed on C target. The result of alpha step measurement showed that the thickness of the MoC_x TFs varied from163.3 to 194.86 nm as C power was increased from 160 to 200 W. The crystallinity of MoC_x such as b-Mo₂C, Mo₂C, and diamond like carbon (DLC) structures were observed by XRD. The oxidation states of Mo and C were determined using high resolution XPS spectra of Mo 3d and C 1s were deconvoluted. Molybdenum was consisted of Mo, Mo⁴⁺, and Mo⁶⁺ species. And C was deconvoluted to C-Mo, C, C-O, and C=O species.

• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.155-159
• /
• 1982

The new molybdenum(Ⅴ)-triethylenetetraamine complexes such as Trien$H_4(MoOCl_5)_2,\;(MoOCl_3)_2$(trien), and$Mo_2O_4Cl_2$ (trien) have been prepared, and the chemical, magnetic and spectroscopic properties of the complexes have been investigated. Trien$H_4(MoOCl_5)_2has been isolated as green crystal and from this salt the nonelectrolytic and paramagnetic complexes,$(MoOCl_3)_2$ (trien) have been prepared by evolution of hydrogen chloride in anhydrous ethanol. Hydrolysis of triethylenetetraammonium oxopentachloromolybdate(V) yielded the nonelectrolytic and dismagnetic complex, $Mo_2O_4Cl_2$(trien) as brown solid.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.44-49
• /
• 2018

$MoO{_4}^{2-}$ is the stable chemical species of Mo(VI) in alkaline solution. In the pH range of 2 to 6, condensation polymerization between $MoO{_4}^{2-}$ and hydrogen ion results in the formation of various polyanions of Mo(VI). Polycations of Mo(VI) begin to form when solution pH is less than 2. As the concentration of inorganic acid increases, polycations of Mo(VI) can react with the anion of the inorganic acid, resulting in the formation of heteranions of Mo(VI). The distribution of Mo(VI) species at pH < 6 depends on the concentration of Mo(V) and inorganic acid. In order to analyze the solvent extraction and ion exchange data on Mo(VI) from concentrated inorganic acid solution, it is necessary to elucidate the nature of Mo(VI) complexes.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.1
• /
• pp.26-29
• /
• 1995

Six-coordinate molybdenum(Ⅴ)-oxo complexes (PyH)[MoOCl2L] and (R4N)-[MoOCl2L] (R=CH3 and C2H5) with N-salicylidene-2-aminophenol(L1) and its derivatives(L2=5-CH3, L3=3-CH3O, L4=5,6-C4H4 and L5=5-NO2) as ONO-donor ligands have been synthesized and the spectral and electrochemical properties of the complexes by elemental analysis, molar conductivity, UV-vis, IR, 1H NMR and CV have been studied.

• Current Photovoltaic Research
• /
• v.8 no.2
• /
• pp.45-49
• /
• 2020

Molybdenum (Mo) thin films are widely used as back contact in copper indium diselenide (CISe) solar cells. However, despite this, there are only few published studies on the properties of Mo and characteristics of CISe solar cells formed on such Mo substrates. In this studies, we investigated the properties of sputter deposited Mo bilayer, and fabricated non-vacuum CISe solar cells using bilayer Mo substrates. The changes in surface morphology and electrical resistivity were traced by varying the gas pressure during deposition of the bottom Mo layer. In porous surface structure, it was confirmed that the electrical resistivity of Mo bilayer was increased as the amount of oxygen bonded to the Mo atoms increased. The resulting solar cell characteristics vary as the bottom Mo layer deposition pressure, and the maximum solar cell efficiency was achieved when the bottom layer was deposited at 7 mTorr with a thickness of 100 nm and the top layer deposited at 3 mTorr with a thickness of 400 nm.

• Particle and aerosol research
• /
• v.9 no.1
• /
• pp.31-36
• /
• 2013

In this study, Mo metal powder was prepared by hydrogen reduction of Mo trioxides with different purity of 2N and 3N grades. We have obtained Mo metal powder with oxygen content of 1450 ppm by hydrogen reduction and subsequent heat treatment for degassing. Using the Mo metal powder, a low-oxygen Mo ingot was prepared by repetitive vacuum arc melting. The oxygen content of the obtained Mo ingot was less than 70 ppm after vacuum arc melting for 30 min. The purity of the Mo metal powder and the ingot was evaluated using glow discharge mass spectrometry. The purity of the respective Mo ingots was increased to 3N and 4N grades from the Mo powder of 2N and 3N grades after the repetitive vacuum arc melting. The low oxygen Mo ingot thus can be used as a raw material for sputtering targets.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.372-381
• /
• 1985

Oxo molybdenum (V) complexes of substituted 8-quinolinols were synthesized and characterized by means of the investigation of elemental analysis, infrared spectra, electron spectra, electric conductivity and mass spectrometry compared with oxo molybdenum (VI) complexes. Oxo molybdenum(V) complexes were nonelectrolyte and one strong band of stretching mode of molybdenum and terminal oxygen appeared approximately $940cm^{-1}$. Oxo molybdenum(VI) complexes gave two peaks corresponding molybdenum containing ions, a molecular ion (I) of a 2 : 1 (ligand : metal) chelate and a fragment ion (II) of a 1:1 chelate due to the loss of ligand radical from ion (I). Molybdenum(V) complexes were observed the fragment ion(II) of a 1 : 1 chelate partly. The electronic spectra corresponding to d-d transition and charge transfer transition were observed and interpreted.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.116-122
• /
• 1999

The purpose of this study is to develop new process named "hydrogen peroxide dissolution method". This process used hydrogen peroxide, which is harmless to human body and oxidize molybdenum wire selectively.The advantages of hydrogen peroxide dissolution method were no discharge of noxious matter when dissolution of molybdenum wire which used as the center supporter, reactions occur in room temperature and easy to recover dissolved molybdenum. This study was aimed at gathering the basic data of molybdenum wire dissolution-recovery process and proposes the reaction condition of molybdenum wire dissolution-recovery process and the factors influencing those reactions. The results were as follows:1. In the dissolution of molybdenum wire, the early condition of reaction was $15^{\circ}C$, and the temperature condition of state was $32^{\circ}C$. 2. 1) In the GSL-60W type, P.W.(Piece weight) was 11.89mg, C.R. was $65.6\Omega$. 2) In the FL-20W type, P.W. was 11.60mg, C.R. was $4.6\Omega$. 3. The molybdenum of process water was treated of a precipitation after dry and after stagnation in the one day, the molybdenum of upper water was treated of precipitation after dry and after congelation.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.101-108
• /
• 1997

In repaired weldment of ASTM A-470 class 8 high pressure stream turbine rotor steel, creep rupture life was studied in relation with carbide morphology. Carbides were identified using carbide extraction replica method. A retired rotor has molybdenum rich carbide $M_2C$, lndacochea vanadium rich carbide $M_4C_3$, and chromium rich carbides $M_{23}C_6$and $M_7C_3$. Weldments ruptured at ICHAZ showed that some of carbides have been transformed into spherical types of coarsened carbides at ruptured area. Those carbides were revealed as molybdenum rich $M_6C$ carbide and they provided cavitation sites due to molybdenum depletion around $(M_6C)$ carbide. However coarsened $M_6C$ and $M_{23}C_6$ carbides were observed at ruptured area in case of ruptured at CGHAZ.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.252-252
• /
• 2013

최근 그래핀, hexagonal boron nitride (h-BN) 및 $MoS_2$ (molybdenum disulfide)와 같은 2차원 결정 물질들은 무어의 법칙(Moore's Law)를 뛰어넘어 계속적인 소자의 소형화를 가능케 하고 또한 대면적, 저비용 소자 개발을 가능케 하는 우수한 특성을 가진 차세대 반도체 트랜지스터 소재로 각광받고 있다. $MoS_2$는 bulk 상태일 때는 1.2 eV의 indirect 밴드갭을 가지지만 단층형태일 때는 1.8 eV의 direct 밴드갭을 가지며 dielectric screening 기법등을 통해 mobility를 향상시킬 수 있는 것으로 연구된 바 있다. 본 연구에서는 화학기상증착 (chemical vapor deposition)법을 이용하여 $MoS_2$ 박막을 형성하기 위한 기초연구인 Mo 전구체의 특성평가 및 적합한 공정조건 개발 연구를 수행하였다. 사용한 전구체는 $Mo(CO)_6$ (Molybdenum hexacarbonyl)이고, 온도 및 압력, 반응기체(H2 S, Hydrogen sulfide) 유량 등의 공정 조건 변화에 따른 거동을 Fourier transform infrared spectroscopy (FT-IR) 시스템을 사용하여 측정하였다. 또한 $Mo(CO)_6$의 분자구조를 상용 프로그램인 Gaussian으로 시뮬레이션 하여 실제 FT-IR 측정 결과값과 비교 분석하였다.