• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.170-173
• /
• 1963

A tri-thiocyanate molybdenum (Ⅴ) complex containing pyridine has been prepared by one step process; namely, the solvent extraction of molybdenum (Ⅴ)-thiocyanate complex into organic solvents followed by precipitation of the compound by addition of pyridine to the extract. It is concluded that the compound has a definite composition regardless of the various mole ratios of molybdenum to thiocyanate ion employed in the preparation. The use of hydrazine as the reducing agent eliminates the necessity of working under inert atmosphere and of further purification of the product. Molybdenum (Ⅴ)-thiocyanate (1:3) complex can be quantitatively and selectively extracted with slightly polar organic solvents such as ethyl acetate, and the pyridine complex is quantitatively obtained due to the insolubility of the compound in them. The oxidation state of molybdenum in the compound is + 5 and the formula appears to be $MoH_2O_2(NCS)_3Py_2$ from the contents of Mo and NCS in the compound. The solubility of the compound in various has been studied at $25^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.6 no.6
• /
• pp.626-631
• /
• 1996

Reactive dc magnetron sputtering 법을 이용하여 증착한 molybdenum mitride 박막의 Cu 확산 방지막 특성을 조사하였다. Cu 확산 방지막으로서 molybdenum nitride 박막의 열적안정성을 관찰하기 위하여 molybdenum nitride 박막 위에 Cu를 evaporation 법으로 증착하고 진공 열처리하였다. Cu/r-Mo2N/si 구조는 $600^{\circ}C$, 30분간 열처리 시까지 안정하였다. 확산 방지막의 파괴는 $650^{\circ}C$, 30분간 열처리 시부터 격자 확산(lattice diffusion)이나 입계(grain boundary)과 결함(defect)을 통한 확산에 의해 나타나기 시작하였고, 이 때 molybdenum silicide과 copper silicide의 형성에 기인된 것으로 생각되었다. 열처리 이후 Cu/r-Mo2N/Si 사이의 상호반응이 증가하였다. 이는 Rutherford backscattering spectrometry, Auger electron spectroscopy 그리고 Nomarski microscopy 등의 분석을 통해 조사되었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.6-12
• /
• 2000

In this study, molybdenum thin films were etched with Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio in an magneti-cally enhanced reactive ion etching(MERIE) by the etching parameters such as rf power of 250 watts, chamber pressure of 100 mTorr and B-field of 30 gauss. The etch rate was 150nm/min under Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio of 0.25. At this time, the selectivity of Mo to SiO\ulcorner, photoresist were respectively 0.94, 0.05. The surface reaction of the etched Mo thin films was investigated with X-ray photoelectron spectroscopy(XPS). It was analyzed that Mo peaks was mainly observed in Mo-O bonds formed MoO\ulcorner compounds and F was detected in Mo-F and O-F bonds. Cl peaks were detected by the peak of Cl 2p\ulcorner in Cl-Mo bonds of MoCl\ulcorner or MoO\ulcornerCl\ulcorner formulas. Almost all of both Cl and S atoms had been com-bined with Mo, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.665-672
• /
• 1997

We applied mechanical alloying process by ball milling to produce molybdenum silicides $MoSi_2$ and $Mo_5Si_3$ using a mixture of elemental molybdenum and silicon powders at room temperature. The intermetallic compound MoSi$_3$ have been obtained by ball milling of $Mo_{33}Si_{67}$ mixture powders for 100 h, which is transformed to single $MoSi_2$ phase by subsequent heat treatment up to $725^{\circ}C$. The grain size of the $MoSi_2$ powders thus obtained was 19 nm, being approximately four times smaller than that of the commercial alloy. The intermetallic compound $MoSi_2$ with grain size of 30 nm have been also obtained by ball milling of $Mo_{62}Si_{38}$ mixture powders for 500 h, which is transformed to single $MoSi_2$ phase by heating up to $1000^{\circ}C$. We believe that the retarded ball milling time for the formation of $MoSi_2$ phase is attributed to its complicated crystal structure and large unit cell. The finer grain size in the ball-milled molybdenum silicides powders is expected to improve room-temperature mechanical properties for high-temperature structural materials.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.345-351
• /
• 1986

Monoxo-bridged binuclear molybdenum(V) complex, $[Mo_2O_3\;(bipy)_2\;(NCS)_4]$ in aqueous acetone mixture produces the corresponding dioxo-bridged binuclear molybdenum(V) complex, $MoO_4(bipy)_2(NCS)_2$. The rate of conversion of $[Mo_2O_3(bipy)_2(NCS)_4]$ to $MoO_4(bipy)_2(NCS)_2$ has been measured by spectrophotometric method. The rate of formation of dioxo-bridged binuclear molybdenum(V) complexes with solvent water follows the rate law, rate = k$[Mo_2O_3(bipy)_2(NCS)_4]\;[H_2O]$. The reaction mechanism for the formation of dioxo-bridged complex is discussed. The observed negative volume of activation shows that the complex is strongly attracted to the solvent molecules at transition state.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.388-388
• /
• 2010

Molybdenum oxide thin films were deposited on p-type Si(100) by an RF magnetron sputtering method. The physical and chemical properties of these films were studied with X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques. The thickness of molybdenum oxide thin films was measured by spectroscopic ellipsometer (SE) and the thickness was about 200 nm. As the oxygen gas pressure increased, the thickness was decreased, the phases of the thin films were changed, and the amount of metallic Mo decreased but the contents of $Mo^{6+}$ species increases.

• Corrosion Science and Technology
• /
• v.2 no.2
• /
• pp.75-81
• /
• 2003

Chromium, molybdenum. and nitrogen are very important alloying elements in stainless steels and its effect was approved in pitting resistance equivalent (PRE) equations and many experimental results. However, Cr can improve the corrosion resistance, but facilitate the formation of sigma phase. Also. Mo has the same effect in stainless steels. If Cr and Mo are added at high amount to increase the corrosion resistance of stainless steel, corrosion resistance in annealed alloys can be improved, but in case of welding or aging heat treatment. its resistance will be drastically decreased. In this work, increasing Cr and N contents but decreasing Mo than the commercial alloys made the experimental alloys. Typical alloys are 25Cr-4.5Mo-0.43N alloy, 27Cr-4.7Mo-0.4N alloy, 27Cr-5.3Mo-0.25N alloy, 32Cr-2.6Mo-0.36N alloy. After annealing and aging heat treatment, microstructures, anodic polarization test, and pitting corrosion test were performed. Annealed alloys showed $100^{\circ}C$ of CPT and aged alloys showed the different tendency depending upon Cr and Mo contents(SFI)

• Korean Journal of Materials Research
• /
• v.16 no.5
• /
• pp.297-301
• /
• 2006

Si/Mo multilayer anode consisting of active/inactive material was prepared using rf/dc magnetron sputtering. Molybdenum acts as a buffer against the volume change of the Silicon. Multilayer deposited on RT (reversible treatment) copper foil current collector to enhance adhesion between Silicon and copper foil. Deposited Silicon was identified as an amorphous. Amorphous has a relatively open structure than crystal structure, thus prevents the lattice expansion and has many diffusion paths of Li ion. When deposited time of Silicon and Molybdenum is 30 second and 2 second respectably, electrode has more capacity and good cycle stability. A 3000 nm thick multilayer was maintained 99% of the initial capacity (1624 $mAhg^{-1}$) after 100 cycles. As the increase of the multilayer thickness (4500 nm, 6000 nm), Si/Mo mutilayer anodes show aggravation cycle stability.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.600-603
• /
• 2003

Energy spectrum modulation of X-ray source in digital mammography has been studied. In this study, we calculated various filtered spectra using the scattering data. Primary spectra were generated by Molybdenum (Mo) and Tungsten (W) targets. The materials of added filters are Molybdenum and Rhodium (Rh) for 40 kVp Mo. primary spectrum, the amounts of photons over whole energy ranges are attenuated to 0.43 with 0.03 mm Mo filter and 0.38 with 0.06 mm Mo filter while the photons of energy ranged from 17 keV to 20 keV. The photons of low energy ranged below 17 keV are considerably attenuated. This effect brings out reducing the scattered radiation and dose to the patient, and enhancing subject contrast in the image. The results show that filtered spectra are not seriously affected by X-ray tube loadability. Because the energy range from 17 keV to 20 keV is directly transmitted although low and high energies are mainly filtered.

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.1085-1091
• /
• 1995

Molybdenum disilicide (MoSi2) was synthesized from Mo, MoO3, Si and Al powders by self-propagating high temperature synthesis (SHS). The effect of processing parameters such as Mo/MoO3 molar ratio, Ar gas pressure in the reactor and pressing pressure of compacts in synthesis of MoSi2 were investigated. h-MoSi2 was transformed into t-MoSi2 with increasing the Mo/MoO3 mole ratio, and only t-MoSi2 phase was identified above 3.5 : 1 (molar ratio). The synthesized phases did not change with the variation of Ar gas pressure and pressing pressure of compacts. It was found that the combustion temperature was above 2,50$0^{\circ}C$. The products were separated into MoSi2 (s) and $\alpha$-Al2O3 by the difference of their specific grativities. Bending strength, hardness and density of sintered specimen exhibited 82 MPa, 5.368 GPa and 5.43 g/㎤, respectively.