• KSBB Journal
• /
• v.23 no.5
• /
• pp.452-459
• /
• 2008

To obtain maximal efficacy with minimal systemic side-effects, many studies have been carried out to achieve the controlled release of 5-fluorouracil (5-FU). In this study, biodegradable poly(L-lactide) (L-PLA) microparticles containing 5-FU were prepared by a process, called aerosol solvent extraction system (ASES), utilizing supercritical carbon dioxide. The effects of various organic solvents, drug/polymer feeding ratio, polymer molecular weight, and blending with the same polymers with different molecular weights on the formation of 5-FU loaded microparticles were investigated under a predetermined operating condition from our previous study. The drug recovery, entrapment efficiency, and in vitro drug release kinetics were determined by HPLC assays. The drug recovery obtained from the ASES process was found to be very high, whereas the drug entrapment efficiency was considerably low in all the experiments due to the poor affinity between L-PLA and 5-FU. These results indicated that the precipitation rate of L-PLA might be quite different from that of 5-FU so that there was little chance to form 5-FU loaded L-PLA microparticles.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.752-758
• /
• 2002

This study was investigated on properties and thermostability of gelatin-degrading proteinases in the fruit of Actinidia chinensis (kiwifruit) for the industrial application. Three gelatin-degrading proteinases (PI, PII and PIII) were detected from the pulp of fruits. The molecular weights of these proteinases, PI, PII and PIII, were approximately 220 kD, 51 kD, and 26 kD respectively, on the basis of gelatin-containing SDS-PACE. The optimum pH of these proteinases ranged from 2.0 to 5.0 with a maximal activity at pH 4.0. These proteinases had a high sensitivity to E-64 and iodoacetate which are cysteine protease inhibitors, and required DTT, cysteine, and $\beta$-mercaptoethanol for their activities which are stimulators for cysteine proteases. These results indicate that these proteinases are cysteine proteinases and the proteinase PIII is actinidin (EC 3.4.22.14), based on the molecular weight and/or susceptibility against proteinase inhibitors. These proteinases were strongly activated by $Ca^{2+}$, $Mg^{2+}$ and $Mn^{2+}$, whereas strongly inhibited by Zn$^{2＋}$ and Hg$^{2＋}$. However, these proteinases have slightly different susceptibility against other cations ($Ca^{2+}$, $Cu^{2+}$, $Al^{3+}$, $Ca^{3+}$. The temperature stability of proteinase PIII was more stable than proteinases PI and PII. Moreover, proteinase PIII remained stable below $50^{\circ}C$ for 48hr, showing the residual activity above 75% of the enzyme activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.537-543
• /
• 2019

Alumina(Al₂O₃) is a ceramic material used in industry with a range of particle sizes and characteristics. In this study, a boehmite sol was prepared by a hydrolysis and peptizing process using the Sol-Gel method from aluminum isopropoxide (AIP). γ-Al₂O₃ was prepared by drying and calcining. To prevent particle agglomeration during the manufacturing process, four kinds of polyvinyl alcohol (PVA) with molecular weights of 9,000~10,000, 31,000~50,000, 89,000~98,000, and 130,000 were added and three concentrations of HNO₃ (0.1, 0.3, 0.5 molar ratio) were added to determine their effects on the particles. The crystal structure, composition, particle size and shape of the prepared γ-Al₂O₃ were confirmed through x-ray diffraction (XRD), x-ray fluorescence analyzer (XRF), particle size analyzer (PSA), and field emission scanning electron microscopy (FE-SEM). As a result, γ-Al₂O₃ with a purity of approximately 98.2% was synthesized, and the particle size decreased and the uniformity increased with increasing ratio of HNO₃ addition and PVA molecular weight. From these results, the particle size can be controlled during the manufacturing process of γ-Al₂O₃ by controlling the addition ratio of PVA and HNO₃.

• Journal of Sericultural and Entomological Science
• /
• v.31 no.1
• /
• pp.37-44
• /
• 1989

The parasporal crystals of Bacillus thuringinsis subspecies kurstaki, dendrolimus, finitimus, aizawai and israelensis were compared by polyacrylamide electrophoresis, amino acid composition and immunological analysis. In the subspecies of kurstaki, dendrolimus, finitimus and aizawai, the molecular weights of main subusnits of crystal solubilized by alkaline solution were 1.3${\times}$105 and 6.5${\times}$104 while those of subsp. israelensis were 4${\times}$104 and 1,4${\times}$104. The degradation of lepidopteran toxic subspecies crystals by silkworm midgut protease showed 6.0-6.4${\times}$104 molecular weight and the pattern of degradation of subsp. israelensis crystals was similar to that of alkaline solution treatment. In the amino acid composition, aspartic acid in subsp. israelensis and glutiamic acid in the other four subspecies were the most abundant. The immunological characteristics of the crystals revealed that the antibody produced against the alkali-solubilized crystal protein of subsp. israelensis reacted with only its antigen, but the crystal antigens from the other four lepidopteran toxic subspecies did cross-react with each other as well as with their own homologous antisera.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.121-127
• /
• 2010

In present work, sulfonated poly(arylene biphenyklsulfone ether) copolymers containing hydroquinone moiety were successfully synthesized using 4,4'-bis[(4-chlorophenyl)sulfonyl]-1,1'-biphenyl(BCPSBP), hydroquinone sulfonic acid potassium salt(sHQ), 4,4'-sulfonyldiphenol and evaluated their characteristics. Three kinds of polymer electrolyte membranes, PBPSEH-HQ00, PBPSEH-HQ10 and PBPSEH-HQ30 were prepared by using mole fraction of sulfonated hydroquinone(sHQ). The structure of the fabricated polymers was analyzed using NMR, IR and GPC. The Mw(weight-average molecular weights) of the polymers were in the range of 62,000-213,000 g $mol^{-1}$, and the molecular weight distribution (Mw/Mn) varied from 1.66-4.04. The thermal analysis of the copolymers was carried out by TGA and DSC. The temperature of Td5% and Td10% was decreased with the mole fraction of sHQ but Tg was increased with the mole fraction. The water uptake, IEC and ion conductivity were increased with increasing the ionic cluster of the polymers. The proton conductivity equal to 9.4 mS $cm^{-1}$ was measured for the PBPSEH-HQ30 membrane at $90^{\circ}C$ and 100% relative humidity. From the observed results it is clear that the prepared hydrocarbon membrane can be considered as suitable polymer electrolyte membrane for the application of PEMFC.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.8
• /
• pp.1201-1209
• /
• 2006

The purpose of this study was to isolate probiotic lactic acid bacteria (LAB) that produce bile salt hydrolase (BSH), and to evaluate its effects on serum cholesterol level. One-hundred-twenty bacterial colonies were initially isolated from human feces, and five strains were selected after screening based on their resistance to acids, tolerance against bile salts, and inhibitory activity on Escherichia coli. The Lactobacillus plantarum strain with the highest level of BSH activity was identified using 16S rRNA sequences, and was named L. plantarum CK 102. L. plantarum CK 102 at a level of 1.36$\times$10$^8$cfu/ml survived in pH 2 buffer for 6 h and exhibited excellent tolerance for bile salt. Coculturing the strain with E. coli in MRS broth resulted in strong inhibition against growth of E. coli at 18 h. Furthermore, the potential effect of CK 102 on serum cholesterol level was evaluated in rats. Thirty-two rats [Sprague-Dawley (SD) male, 129$\pm$l g, 5 weeks old] were divided into four groups of eight each. For six weeks, Group 1 was fed a normal diet (negative control); Group 2 was fed a cholesterol-enriched diet (positive control); Group 3 was fed a cholesterol-enriched diet plus L. plantarum CK 102 at 1.0$\times$10$^7$cfu/ml; and Group 4 was fed a cholesterol-enriched diet plus L. plantarum CK 102 at 5.0$\times$10$^7$cfu/ml. Blood samples were collected, serum lipids were analyzed, and weights of the organs were measured. Total blood cholesterol level, triglyceride, LDL-cholesterol, and free-cholesterol values were lower in rats that were fed 1. plantarum CK 102 than in those not fed L. plantarum CK 102. This cholesterol lowering effect implies that L. plantarum CK 102 could be utilized as an additive for health-assistance foods. In conclusion, these results suggest that the 1. plantarum CK 102 isolated could be used commercially as a probiotic.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.62-66
• /
• 2018

Styrenated phenol alkoxylates (SP-A) were prepared from styrenated phenol (SP) and ethylene oxide (EO) under a homogeneous base catalyst. However, to use EO that is difficult to handle, a high-pressure reaction device capable of controlling the reaction process should be used. Additionally, when a homogeneous base catalyst is used, a neutralization process is required to remove residual bases after the reaction, and it is also difficult to separate the catalyst and the product. Therefore, in this study, we report the results of SP-A prepared from the reaction of SP and EC using only heterogeneous base catalysts. The heterogeneous base catalyst was obtained by supporting KOH on $La_2O_3$ and calcintion. Using EC instead of EO, it was possible to produce SP-A under the atmospheric rather than high-pressure reaction condition. Average molecular weights of synthesized SP-A varied greatly depending on reaction conditions. The average molecular weight of SP-A prepared using the $KOH/La_2O_3$ catalyst could be controlled arbitrarily by controlling the reaction temperature and added catalyst and EC amounts.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.124-124
• /
• 2017

Cadmium (Cd) is of particular concern because of its widespread occurrence and high toxicity and may cause serious morpho-physiological and molecular abnormalities in in plants. The present study was performed to explore Cd-induced morpho-physiological alterations and their potentiality associated mechanisms in Sorghum bicolor leaves at the protein level. Ten-day-old sorghum seedlings were exposed to different concentrations (0, 100, and $150{\mu}M$) of $CdCl_2$, and different morpho-physiological responses were recorded. The effects of Cd exposure on protein expression patterns in S. bicolor were investigated using two-dimensional gel electrophoresis (2-DE) in samples derived from the leaves of both control and Cd-treated seedlings. The observed morphological changes revealed that the plants treated with Cd displayed dramatically altered shoot lengths, fresh weights, and relative water content. In addition, the concentration of Cd was markedly increased by treatment with Cd, and the amount of Cd taken up by the shoots was significantly and directly correlated with the applied level of Cd. Using the 2-DE method, a total of 33 differentially expressed protein spots were analyzed using MALDI-TOF/TOF MS. Of these, treatment with Cd resulted in significant increases in 15 proteins and decreases in 18 proteins. Significant changes were absorbed in the levels of proteins known to be involved in carbohydrate metabolism, transcriptional regulation, translation and stress responses. Proteomic results revealed that Cd stress had an inhibitory effect on carbon fixation, ATP production and the regulation of protein synthesis. In addition, the up-regulation of glutathione S-transferase and cytochrome P450 may play a significant role in Cd-related toxicity and stress responses. Our study provides insights into the integrated molecular mechanisms involved in response to Cd and the effects of Cd on the growth and physiological characteristics of sorghum seedlings. The upregulation of these stress-related genes may be candidates for further research and use in genetic manipulation of sorghum tolerance to Cd stress.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.745-750
• /
• 2005

Naphtha cracking bottoms(NCB) oil was reformed by varying the heat treatment temperature, treatment time, and nitrogen flow rate in preparation of precursor pitch for isotropic pitch-based carbon fibers and activated carbon fibers. The reformed pitches were investigated in the yield, softening point, elementary analysis, and molecular weight distribution, and then the precursors reformed were melt spun to certify the optimum reforming conditions. The optimum precursor pitch was prepared when the NCB oil was reformed at $380^{\circ}C$, 3 h and 1.25 vvm $N_2$, and it's the softening point was around $240^{\circ}C$. The reforming resulted in product yield of 21 wt％. The C/H mole ratio of the precursor pitch increased from 1.07 to 1.34, the aromaticity increased from 0.85 to 0.88. The insolubles in benzene and quinoline were 30.0 wt％ and 1.5 wt％, respectively. The spinning temperature was about $50^{\circ}C$ higher than the softening point. The molecular weights of the precursor components were distributed from 250 to 1250, and 80％ of them were in the range of 250 to 700.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.66-72
• /
• 2016

In this study, a sulfonated poly(arylene ether ketone) block copolymer was prepared from hydrophilic oligomer and hydrophobic oligomer. The structure of the prepared membrane was characterized by $^1H$-NMR, FT-IR and GPC. The $M_w$(weight-average molecular weights) of the polymer was $209,700g\;mol^{-1}$ and the molecular weight distribution($M_w/M_n$) of 1.25 was obtained. The prepared membrane showed excellent thermal stability with gradual weight loss up to $200^{\circ}C$. The proton conductivity of SPAEK block copolymer reached the maximum of $9.0mS\;cm^{-1}$ at $90^{\circ}C$ under 100% relative humidity (RH). From the observed results, it is necessary to do more aggressive attempt to study the possibility of application as an ion-conductive composite electrolyte.