• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.504-508
• /
• 2006

Molecular weight of polyaniline is controlled in the range of oligomer to low molecular weight by controlling the ratio of aniline dimer (p-aminodiphenylamine) to monomer. Aniline dimers act as nucleation sites in chain growth during the polymerization of aniline. The molecular weights of polyanilines are estimated by GPS and relative viscosity measurement. The physical and chemical properties of polyanilines with various molecular weights are studied by UV-Vis, FT-IR, and electrical conductivity measurements.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.232-238
• /
• 2014

Solution polymerization was conducted with water-soluble acrylic acid (AA) as a monomer and potassium persulfate (KPS) as an initiator at a selected temperature between $60^{\circ}C$ and $90^{\circ}C$ with water as a reaction medium. When the ratio between AA and water was reduced or initiator concentration increased, molecular weights decreased. An increase in the reaction temperature produced lower molecular weights. The polydispersity index was close to 1.5 in most of the reactions. An increase in the stirring speed up to 400 rpm led to a progressive increase in molecular weights. When the stirring speed reached 800 rpm, however, we found that both the number and weight average molecular weights decreased. The glass transition temperature was nearly independent of moelcular weights and determined to be between $113^{\circ}C$ and $116^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.693-697
• /
• 2016

In this study, we fabricated the catalysts for enzymatic biofuel cell anode with carbon nanotube (CNT), glucose oxidase (GOx) and various molecular weights branched poly(ethyleneimine)(bPEI) and terephthalaldehyde (TPA) as cross-linker. In case of GOx/bPEI/CNT using only physical entrapments for immobilization, the molecular weights of bPEI didn't affect to electrochemical performances and long term stability. but that of the catalysts cross linked via TPA (TPA[GOx/bPEI/CNT]) improved and the mass transfer of glucose to FAD was interrupted as increasing of the bPEI's molecular weights. Furthermore, it was confirmed that the optimum molecular weight of PEI for TPA [GOx/bPEI/CNT]) structure is 750k that showed marvelous high performance (maximum power density of $0.995mW{\cdot}cm^{-2}$).

• Preventive Nutrition and Food Science
• /
• v.7 no.4
• /
• pp.437-441
• /
• 2002

Rice proteins were extracted from brown and milled rice of five varieties: Kwanganbyeo, Daeanbyeo, Daejinbyeo, Surabyeo, Hwaseongbyeo; and their electrophoretic patterns were analyzed by SDS-PAGE. Albumin was extracted with water, globulin with 5% NaCl, prolamin with 70% ethanol, and glutelin with 0.2 M sodium borate buffer (pH 10.0) containing 0.5% SDS, 0.6% $\beta$-mercaptoethanol. The ratios of albumin : globulin : prolamin : glutelin in the brown rice were 10.8~14.1 : 12.4~16.4 : 3.6~5.3 : 68.6~72.8, and in milled rice were 4.4~5.6 : 10.6~12.0 : 3.9~5.4 : 75.7~79.8. In albumin seven major bands were observed with molecular weights ranging from 14.g~96.8 kDa, in globulin four bands with molecular weights in the range of 14.4~56.9 kDa, prolamin had only one band with a molecular weight of 14.4 kDa, and glutelin had four bands with molecular weights of 14.4 ~ 57.4 kDa. There were no differences in electrophoretic patterns between rice varieties or between brown and milled rice.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.508-515
• /
• 2002

The effects of the crosslinking caused by irradiation dose, molecular weights of the foaming materials, and various foaming processes on the foam structure of the polypropylene (PP) were investigated. The maximum gel content of the PP was 48% when the sheet was irradiated with 3.2 Mrad. This high gel content improved the cell structures by providing high thermal stability. The increase of both the gel content and structural development were stopped at the irradiation dose exceeding 3.2 Mrad. The increase of the molecular weights served to help produce a foam with particularly fine and even cell structures, along with improved thermal stability as well.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.847-850
• /
• 2007

• Archives of Pharmacal Research
• /
• v.12 no.2
• /
• pp.88-93
• /
• 1989

In order to obtain some informations about the effect of molecular weight on the release rate of drug from drug carrier, two types of poly-L-glutamic acid (PLGA)-cytarabine (ara-C) conjugates, PLGA-ara-C:I and PLGA-ara-C:II, were synthesized using two types of PLGA having different average molecular weight, 43,000 and 77,800, respectively. The PLGA-ara-C conjugates were synthesized by mixed anhydride method and found to be covalently linked. Both types of conjugates charged negatively at biological pH. The pH-dependent release rate of ara-C was observed in both cases, and the release rate was accelerated in basic, acidic conditions (the k values were 0.015 $day^{-1}$ at pH 7.0, 0.024 $day^{-1}$ at pH 5.0, and 0.059 $day^{-1}$ at pH 9.0 in the case of PLGA-ara-C:I) and in the presence of pretense. The time required for the release of 16.5% of ara-C from PLGA-ara-C:I were 8 hr and 144 hr in the presence and absence of protease, respectively. Although both types of conjugates showed similar drug substitution ratio, they showed different release rates. Between the two types of conjugates, PLGA-ara-C:II showed the faster release rate (0.030 vs 0.042 $day^{-1}$ in pH 7.4 phosphate buffer solution at $37^{\circ}C$) and the smaller activation energy for the release of drug (12.5 vs 7.7 Kcal/mol) than PLGA-ara-C:I. The characteristic effect of molecular weight on the release rates of PLGA-ara-C conjugates suggests that the drug release rate might be effectively controlled over a prolonged period of time by the combined use of the different types of PLGA-ara-C conjugates having different molecular weights.

• Journal of radiological science and technology
• /
• v.1 no.1
• /
• pp.55-59
• /
• 1978

The photographic characteristics have been studied in relation with various molecular weights of Polyvinylpyrrolidone(PVP). The shape of silver halogen crystals by physical ripening of mixture of photographic gelatine and various molecular weights of PVP were observed. Then, the photographic characteristics have been studied by chemical ripening. Results were concluded as follows: 1. All of the crystals have formed in the shape of (100) or (111). 2. Photographic characteristics were inferior by using PVP of higher molecular weight. 3. Photographic characteristics were superior by using PVP of lower molecular weight. 4. Photographic characteristic were compared with various Emulsion thickness and Tested Resolving power.

• BMB Reports
• /
• v.28 no.1
• /
• pp.46-50
• /
• 1995

Three kinds of mouse tumor necrosis factor (TNF), which have molecular weights of 35 kDa, 45 kDa, and 18 kDa on SDS-PAGE, were partially purified from serum-free culture supernatants of mouse peritoneal macrophages induced with lipopolysaccharide. Analysis of the native molecular weights by gel filtration indicated that the 18 kDa and 45 kDa TNFs aggregate into 50 kDa and 100 kDa molecules, respectively, while the 35 kDa TNF is contained in high molecular weight aggregates of approximately 200 kDa. The three kinds of cytotoxic factors all elicited tumor reducing responses.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.294-299
• /
• 2013

Solution polymerization was conducted with water-soluble methacrylic acid (MAA) as a monomer and potassium persulfate (KPS) as an initiator at a selected temperature between $70^{\circ}C$ and $90^{\circ}C$. When the ratio between MAA and water was reduced or initiator concentration increased, molecular weights decreased. Molecular weights of poly(methacrylic acid) (PMAA) showed nearly no dependence on reaction temperature. The Weissenberg effect was observed in most polymerization reactions, while its effect weakened at $90^{\circ}C$. The polydispersity index was less than 1.5 in most of the reactions. An increase in the stirring speed produced PMAAs with increasing molecular weights. When the stirring speed reached 800 rpm, we retrieved a monodisperse PMAA with both the number and weight average molecular weights of 791,000 g/mol. The glass transition temperature was found to be $162^{\circ}C$.