• Applied Microscopy
• /
• v.29 no.2
• /
• pp.177-187
• /
• 1999

Ultrastructure of gametes in the three-spine stickleback, Gasterosteus aculeatus aculeatus was observed, utilizing light, scanning and transmission electron microscopes. The egg of three-spine stickleback is spherical and demersal type. The eggs are highly adhesived to each other but not to substrates. There are many oil droplets in vitelline membrane. The outer surface of egg envelope is arranged by mushroom-like structures and pore canals. The egg have a micropyle, sperm entry site, in the area of the animal pole. The egg envelope consists of three layers, an outer layer with high electron density, a middle layer consisting two layers and an inner layer consisting of 16 to 20 layers. In the fertilized egg envelope, the molecular weights of these components ranged from 14 kDa to 205 kDa. The molecular weights of nam protein bands are 19.4 kDa, 36.7 KDa, 39.4 kDa, 42.9 kDa, 46.1 kDa and 53.0 kDa. The head of spermatozoa is spherical shape and the acrosome is absent. The mitochondria in midpiece are arranged from one to three layers and separated from the axoneme by the cytoplasmic canal. The tail has two lateral fins and the axoneme is of the 9+2 structure.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.162-177
• /
• 2001

The hydrolysis rates of seven kinds of polyol ester base oils 〔POEs〕 of different branch shape were investigated by using a simple apparatus under mild acidic condition. Seven polyol ester base oils were made of poly hydric alcohols of two-four valence, normal or branched fatty acids of different carbon number. p-Toluene sulfonic acid was used as acid catalyst to accelerate the rate of hydrolysis. Partial esters and fatty acid produced by sequential hydrolysis of POEs were identified and their concentrations were determined by calibrated-internal standard method using Gas Chromatography. The rate constants of each step in sequential hydrolysis were determined by the least square method from rate equation and the concentration of each component, were compared with one another. It was shown that the rate of hydrolysis of POEs was strongly affected by whether molecular structure of fatty acid was straight chain or branch chain and which position was branched. The hydrolysis stability for all the POEs can be reasonably explained by using a steric hindrance effect anticipated fi:om their molecular structures affecting as water molecule makes an attack on the carbonyl carbon of POEs.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2010

Surface plasmon resonance (SPR) which is utilized in thin film refractometry-based sensors has been concerned on measurement of physical, chemical and biological quantities because of its high sensitivity and label-free feature. In this paper, an application of SPR to detection of alcohol content in wine and liquor was investigated. The result showed that SPR sensor had high potential to evaluate alcohol content. Nevertheless, food industry may need SPR sensor with higher sensitivity. Herein, we introduced a nano-technique into fabrication of SPR chip to enhance SPR sensitivity. Using Langmuir-Blodgett (LB) method, gold film with nano-structured surface was devised. In order to make a new SPR chip, firstly, a single layer of nano-scaled silica particles adhered to plain surface of gold film. Thereafter, gold was deposited on the template by an e-beam evaporator. Finally, the nano-structured surface with basin-like shape was obtained after removing the silica particles by sonication. In this study, two types of silica particles, or 130 nm and 300 nm, were used as template beads and sensitivity of the new SPR chip was tested with ethanol solution, respectively. Applying the new developed SPR sensor to a model food of alcoholic beverage, the sensitivity showed improvement of 95% over the conventional one.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.568-573
• /
• 2009

A new soybean variety, "Singang", was released by NICS, RDA in 2008. It is resistant to soybean mosic virus (SMV), which is one of the most serious diseases in soybean production. "Singang" had been developed for seven years by molecular marker-assisted selection (MAS) breeding method using recurrent parent, "Sowon", and donor parent, "L29" which has the SMV-resistance gene, Rsv3. Selected promising breeding line, Suwon 242, was evaluated in yield trials for 2 years from 2005 to 2006 at NICS. Regional yield trials were performed for 3 years from 2006 to 2008 in five locations including Jeju. Agronomic characteristics of "Singang" is a determinate growth habit, purple flower color, grey pubescence, yellow testa, light brown hilum and lanceolate leaflet shape. "Singang" showed the similar performance to "Sowon" cultivar. This variety showed 3 days shorter in days to maturity than the check variety (Pungsannamul). The average yield under regional yield trials in five location was 2.78t/ha. It is adaptable to the whole country except for Gangwon province.

• Korean journal of applied entomology
• /
• v.58 no.1
• /
• pp.9-13
• /
• 2019

Nematode-trapping fungi use various specialized traps to capture nematodes. A fungus that can capture nematodes in three dimensional adhesive networks was isolated from the soil around the root of Cucumis melo L. (Oriental melon) in Seongju, Korea. The conidiophores were found to be septate, hyaline, erect and $290-528(342.8){\mu}m$ high. It produces obovoid shape and 1-3 septate (commonly 2-septate) conidia with a size of $30.5{\times}20.3{\mu}m$. Molecular analysis of 5.8 S rDNA displayed 99% similarity to Arthrobotrys sinensis. On the basis of morphological, morphometric and molecular studies, the fungus was identified as A. sinensis. It is the first report in Korea which can be one of biological control resource of plant-parasitic nematode.

• Journal of The Korean Astronomical Society
• /
• v.24 no.2
• /
• pp.217-271
• /
• 1991

We have observed dense core around young stellar objects, DR21, S140, Orion-KL, and L1551 using four millimeter-wave transitions of $HC_3N\;J$=4-3, J=5-4, J=10-9, and J=12-11. The spatial distribution of $HC_3N$ emission closely resembles the morphology of the previous CS observations that trace high density gas. These observations reveal the existence of $HC_3N$ dense cores around central IR source, elliptical in shape and almost perpendicular to the CO bipolar outflow axis. Small differences can be explained by that $HC_3N$ molecular line is more optically thin and is seen to be more detailed structure in the neighborhood of central IR sources. In S140 and Orion-KL, massive(${\sim}10\;M_{\odot}$), slowly rotating dense cores lie near at the central IR sources of bipolar outflows. The velocity channel maps of DR21 show that the bipolar outflow gas may have a correlation with the dense core of DR21. We analyzed intensities of the four lines to derive physical conditions in dense core from two methods, LTE and LVG. The column density of $HC_3N$, $N(HC_3N)$, between LTE and LVG calculations agree well with each other. The abundances of $HC_3N$ in each observing source have been estimated using the average values of $n(H_2)$ and $N(HC_3N)$ and assuming the size of dense core. The fractional $HC_3N$ abundances in massive dense cores of DR21, S140, and Orion-KL have a range of $(2-7){\times}10^{-10}$, while that of low mass dense core, L1551, has one order of magnitude greater value of $2{\times}10^{-9}$. This should be considered good agreement with the result by Morris et al.(1976). It may be considered that dense cores of DR21, S140, and Orion-KL may have almost same stage of chemical evolution, and their abundances have a small values relative to that of L1551. The column density $N(HC_3N)$ decreases with increasing distance from the densest part of the cloud, the central infrared source, and have the relation of $N(HC_3N){\varpropto}R^{\alpha}$, where a has a range of 0.65 to 0.89. The values of $n(H_2)$ are not varied with increasing distance from the dense core, and have almost same values. Therefore, it is considered that the dense cores in these regions probably consist of dense clumps in diffuse molecular gas medium, and $n(H_2)$ of each clump is ${\sim}10^5\;cm^{-3}$. Levels in the $T_{ex}$ increases with $n(H_2)$. It is considered that the $HC_3N$ dense cores are not completely thermalized. We examine the relationships between the luminosity of central infrared sources versus mass of the dense cores, and the luminosity of central infrared sources versus molecular hydrogen column density. Luminosities of the central IR sources show good correlation with mass and hydrogen column density of the dense core. Same has been found from CS observations. However, mass and size derived from $HC_3N$ observations are one order of magnitude smaller than those from CS. It can be interpreted that we see more central part of the cloud cores in $NC_3N$ lines than CS lines.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.176-189
• /
• 2002

The purpose of this study were to illustrate the various medication error types and causes and identified to related drugs to provide basic data for preventing nurses' medication error by analysing 73 cases of AJN 'medication Error' column(1993, Oct -2000, Nov). Nurses' types of medication error were classified into 7 types. The most frequent error types are wrong medication$(21.9\%)$ and the wrong dose$(21.9\%)$ together. The others are wrong $time(4.1\%)$, $omission(2.7\%)$, mechanical $error(2.7\%)$, incorrect IV $rate(1.4\%)$. wrong route $administration(1.4\%)$ in order. Nurses' causes of medication error were 9 kinds. The most frequent type is confusing between similar drug shape, color, size, name, injection devices and patient's $name(43.9\%)$ and the others are lack of knowledge about $drugs(26.8\%),\; slips(7.3\%),\; miscalculating\;dose(4.9\%)$, incorrect adjusts $devices(4.9\%)$, difficulty to read or illegible decimal $point(4.9\%),$ $abbreviation(2.4\%)$, fatigue with $overwork(2.4\%)$ and no communication with $patient(2.4\%)$ in order. Related drugs with medication error are as follows. - dose unit(IU. minims. mcg/min. mEq) : Heparin. insulin. synthetic calcitonin, some enzymes and hormones, vitamins, some antibiotics, tuberculin injection. MgSO4 injection. nitroglycerin - similar size, color and shape drug : $0.9\%$ N/S and acetic acid $0.25\%$ for irrigation. premixed 2mg lidocaine sol. and $0.9\%$ N/S, gentamycin 20mg/2mL for children and 80mg/2mL for adult, dextroamphetamine 5mg and 10mg capsule. sedatives chloral hydrate 250mg/5mL and 500mg/5mL - similar name :Aredia(pamidronate disodium) and Adriamycin(doxorubicin), Lamictal (lamotrigine) and Lamisil 250mg. Elderpryl and enalapril, cefotaxime and cefoxitin, carboplatin and cisplatin, sumatriptan and zolmitriptan, Celebrex and Celexa, Humulin and Humalog, Percodan and Percocet, Diabeta and Diabinese, Epivir and Retrovir, Xanax(alprazolam) and Zantac(ranitidine) - decimal point : low molecular weight warfarin, methotrexate - unfamiliar drug uses of familiar drug ; methotrexate. droperidol, imipramine, propranolol - number of drug name(misleading chemical name) : 6-thioguanine, 6-mercaptopurine, 5-fluorouracil - type of administration route : Oxycodone(OxyContin). - administration time : acarbose(Precose). - injection way (Z-track method): hydroxyzine - epidural cathether : LMWHs(enoxaparin, dalteparin), - ADD Vantage self contained delivery system : ceftriaxone(Rocephin)

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.153-158
• /
• 2019

The purpose of this study is to compare and analyse the differences between a customized small finger made by 3D printing technology, a real small finger, and the other made from plaster of an orthotic company. The areas and the volumes of each cross-section were measured by Computer tomography(CT) and a 3D scanner and analysis of variance was performed to find out the differences of each shape. The areas of the point of 15.69mm, Distal Interphalangel Joints, were measured 30 times respectively using the caliper toll function of Picture Archiving Communication System(PASC) program. The volumes were measured by Configure Units of Meshmixer Program. There was no significant difference in the areas between three of them and there was 0.2 mm gap in the volume, which was more than the significance probability. Therefore, the result of this study shows the availability of finger orthoses made by 3D printing technology in the medical field.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.59.1-59.1
• /
• 2015

We present hydrodynamic simulations of gas clouds that inflowing from the disk to a few hundred parsec region of the Milky Way. Realistic Galactic structures are included in our simulations by thousands of multipole expansions that describe 6.4 million stellar particles of a self-consistent Galaxy simulation (Baba, Saitoh & Wada, in prep.). We find that a hybrid multipole expansion model with two different basis sets and a thick disk correction well reproduces the overall structures of the Milky Way. We find that the nuclear ring evolves into 240 pc at T~1500 Myr, regardless of the initial size. For most of simulation runs, gas inflow rate to the nuclear region is equilibrated as ~0.02 Msun/yr, and thus accumulated gas mass and star formation activity is stabilized as $6{\times}10^7Msun$ and ~0.02M/yr, respectively. These stabilized values are in a good agreement with estimations for the CMZ. The nuclear ring is off-centered to the Galactic center by the lopsided central mass distribution of the Galaxy model, and thus an asymmetric mass distribution is arose accordingly. The lopsidedness also leads the nuclear ring to be tilted to the Galactic plane and to precess along the Galaxy rotation. In early evolutionary stage when gas clouds start to inflow and form the nuclear ring, the z-directional oscillations of the gas clouds results in the twisted, infinity-shaped nuclear ring. Since the infinity-shaped feature is transient only for first 100 Myr, the current infinity-shape observed in the CMZ may indicate that the CMZ forms quite recently.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.351-359
• /
• 2014

For identifying the plasmid DNA coding cry gene of Bacillus thuringiensis subsp. aizawai KB098 with high insecticidal activity against Spodoptera exigua, mutant isolates with no crystal protein were produced by $42^{\circ}C$ incubation condition and then mutant plasmid DNA band patterns were compared with those of KB098. KB098 isolates had 4 cry genes, cry1Aa, cry1Ab, cry1C, cry1D, and also had been found seven plasmid DNA. Though the SDS-PAGE experiment, it was confirmed that mutant didn't produce 130~145kDa protein band involved in bipyramidal shape crystal. Also, five mutant isolates had no cry genes coding plasmid DNA in PCR. In result of comparison the plasmid DNA of KB098 and 5 mutant isolates, only 1 plasmid DNA band was left out in mutant plasmid DNA pattern, so that the missing band was extracted from the gel. The missing(disappeared) plasmid DNA was the largest molecular size among the 7 plasmid DNA of KB098 and it was also confirmed this plasmid DNA had all 4 cry genes through PCR.