• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.747-754
• /
• 2009

In this study, adsorption isotherms of o-DCB(ortho-dichlorobenzene) on an activated carbon heated at $1000^{\circ}C$ for 24 hours were obtained by experiment and were predicted by using molecular simulation. The initial molecular structure of the activated carbon was designed on the basis of its molecular formula and functional groups ratio measured experimentally. Then, the molecular structure was optimized using the COMPASS(condensed-phase optimized molecular potentials for atomistic simulation studies) force field. The particle porosity, specific surface area, and particle density obtained from the optimized molecular structure of activated carbon were compared with those experimental data. The errors between experimental data and simulation results of the particle porosity, specific surface area, and particle density were shown as 7.6, 3.8, and 2.8%, respectively. Adsorption isotherms constants of o-DCB are calculated by the GCMC(grand canonical Monte Carlo) method in the optimized molecular structure of activated carbon. The simulation result of the adsorption isotherms showed an error of under 3%, compared to that of experimental data. Adsorption isotherms, adsorption heat and pore diffusivity of 2,3,7,8-TCDD(tetrachlorodibenzo-p-dioxin) was finally obtained in the same molecular structure of the activated carbon as used for o-DCB. Thus, adsorption characteristics of persistent organic pollutants on activated carbon, which are not easy to experimentally evaluate, are predicted by the molecular simulation.

• Macromolecular Research
• /
• v.16 no.8
• /
• pp.686-694
• /
• 2008

We studied the molecular shapes and structural characteristics of a 33-armed, star polystyrene (PS-33A) and two $3^{rd}$-generation, dendrimer-like, star-branched poly(methyl methacrylate)s with different architectures (pMMA-G3a and PMMA-3Gb) and 32 end-branches under good solvent and theta ($\Theta$) solvent conditions by using synchrotron small angle X-ray scattering (SAXS). The SAXS analyses were used to determine the structural details of the star PS and dendrimer-like, star-branched PMMA polymers. PS-33A had a fuzzy-spherical shape, whereas PMMA-G3a and PMMA-G3b had fuzzy-ellipsoidal shapes of similar size, despite their different chemical architectures. The star PS polymer's arms were more extended than those of linear polystyrene. Furthermore, the branches of the dendrimer-like, star-branched polymers were more extended than those of the star PS polymer, despite having almost the same number of branches as PS-33A. The differences between the internal chain structures of these materials was attributed to their different chemical architectures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.1
• /
• pp.34-41
• /
• 2005

An experimental study of molecular motions on a liquid-vapor interface is limited due to micro-scale characteristics of a system with an angstrom or a nanometer size Therefore, in recent, many studies for micro-scale systems have been conducted by a computer simulation because it is free from experimental limitations. In this study, through the molecular dynamic (MD) method. molecular behavior was clarified on a liquid-vapor interface and a criterion to distinguish between liquid and vapor was suggested by a potential energy and the number of neighboring molecules. At an interface. the potential energy of a molecule was increased but the number of neighboring molecules was decreased when the molecule moved into a vapor region from a liquid region, and vice versa.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.504-508
• /
• 2006

Molecular weight of polyaniline is controlled in the range of oligomer to low molecular weight by controlling the ratio of aniline dimer (p-aminodiphenylamine) to monomer. Aniline dimers act as nucleation sites in chain growth during the polymerization of aniline. The molecular weights of polyanilines are estimated by GPS and relative viscosity measurement. The physical and chemical properties of polyanilines with various molecular weights are studied by UV-Vis, FT-IR, and electrical conductivity measurements.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.47-51
• /
• 2011

We investigated the substrate surface polishing by the spherical rigid abrasive under the compression using classical molecular dynamics modeling. We performed three-dimensional molecular dynamic simulations using the Morse potential functions for the various slide-to-roll ratios, from 0 to 1, and then, the compressive forces acting on the spherical rigid abrasive were calculated as functions of the time and the slide-to-roll ratio. The friction coefficients obtained from the classical molecular dynamics simulations were compared to those obtained from the experiments; and found that the molecular dynamic simulation results with the slide-to-roll ratio of 0 value were in good agreement with the experimental results.

• Polymer Science and Technology
• /
• v.20 no.3
• /
• pp.245-250
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.24 no.7
• /
• pp.899-900
• /
• 2003

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.65-68
• /
• 2004

Molecular imprinting, which was first proposed by Wulff and Sarhan in 1972 [1], is a facile way to construct molecular recognition sites by applying a simple radical polymerization [2]. Since 1994, the authors have proposed an alternative molecular imprinting method in which polymeric materials are directly converted into molecular recognition materials [3].(omitted)

• Membrane Journal
• /
• v.24 no.5
• /
• pp.341-349
• /
• 2014

Molecular dynamics (MD) computer simulation is a very useful tool to calculate the trajectory and velocity of particles (generally, atoms), and thus to analyze the various structures and kinetic properties of atoms and molecules. For gas separation membranes, MD has been widely used for structure analysis of polymers such as free volume analysis and conformation search, and for the study of gas transport behavior such as permeability and diffusivity. In this paper, general methodology how to apply MD on gas separation membranes will be described and various related researches will be introduced.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.522-525
• /
• 2002

A very rapid and efficient separation technique for cellular rhizobial cyclosophoraoses was developed based on fractional precipitation and partition chromatography. Cyclosophoraoses are known to function in the osmotic regulation and root nodule formation of legumes during the nitrogen fixation process. Cyclosophoraoses are produced as unbranched cyclic (1longrightarrow12)-${\beta}$-D-glucans in Agrobacterium or Rhizobium species. Recent research has shown that cyclosophoraoses can form inclusion complexation with various unstable or insoluble guest chemicals, thereby implying great potential for industrial application. Typical separation of pure cellular cyclosophoraoses has been so far carried out by several time-consuming steps, including size exclusion, anion exchange, and desalting liquid chromatographies, with a relatively poor recovery. However, the proposed method demonstrated that the successive application of fractional ethanol precipitation and one step of silica gel-based flash column chromatography was enough to simultaneously purify neutral or anionic forms of cyclosophoraoses. This novel technique is very rapid and provides a high recovery.