• 한국주조공학회지
• /
• 제21권1호
• /
• pp.41-47
• /
• 2001

본 연구에서는 FDM법과 CA법을 결합하여 주물의 응고조직성장 예측 프로그램을 개발하였다. 새로운 농도장 분포 알고리즘을 개발하고, 이 결과를 1차원 해석해와 비교하였으며, 이를 2차원 응고조직 및 농도계산에 적용하였다. 3차원 응고조직 예측 해석연구를 통하여 복잡한 형상의 주물에 적용 하였으며, turbine blade형상의 응고조직 시뮬레이션을 통하여 인출속도가 응고조직에 미치는 영향에 대하여 조사하였고, 원하는 주조조업변수를 본 시뮬레이션에 의하여 결정할 수 있으리라 생각된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.142-143
• /
• 2017

An analysis of the current water leak status of understand structure (underground parking lots, staircases, plumbing systems, water reservoirs, etc.) of multi-family housing in South Korea shows that water leaks are found from cracks in all areas of the underground structure caused by the degradation environment (water pressure by underground water, humidity, temperature, earth pressure, soil behaviour and vibration, etc.), which result in various problems, including mold, malodour, debonding of finishing materials, exfoliation, breakout, water leaks in electrical boxes, efflorescence, sedimentation of calcium hydroxide, decoloration, rusting, damages and pollution among others. Therefore, this study aims to analyse the current status of water leaks in underground structure and use the results as the basic data for developing a standard guideline for water leaks and maintenance by parts of the underground structure of multi-family housing.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.516-524
• /
• 2012

Selective Laser Sintering(SLS) system consists of various element technologies. Main components of the system include a position control system, a speed control system of the roller, and nitrogen atmosphere furtherance for the powdered sintering. Other systems which make the core of the SLS system are build room and the feed room for powder epitaxial, a temperature control system, and a scan path generator for the laser. The powder material for laser sintering is necessary to produce prototypes in Solid Freeform Fabrication(SFF) based on SLS process. This powder material is sintered in powder room using $CO_2$ laser after spreading evenly using roller to reproduce mold via SFF. This study addresses an SFF system by using the SLS process which applies single laser system to enable manufacturing of 3D shape. And to evaluate applicability of the single laser system, experiments were conducted with optimal fabricating process.

• 한국식품과학회지
• /
• 제22권6호
• /
• pp.696-699
• /
• 1990

쌀을 기질로 하여 고오지 곰팡이와 Saccharomyces cerevisiae를 함께 동시 접종하여 혼합 배양에 의한 동시 당화발효를 시도하였다. Aspergillus awamori, A. kawachii, A. niger, A. oryzae 및 A. shirousamii를 각각 S. cerevisiae와 혼합배양하였을 때 A. shirousamii와의 혼합배양에서 가장 높은 주정생산량을 보였다. 이 때의 가수량은 쌀 50g에 대하여 150ml 이었다. 곰팡이와 효모는 각각 $5{\times}10^2\;conidia/ml$ 및 $5{\times}10^6\;cells/ml$로 접종한 경우에, 용적에 대한 표면적의 비는 0.1에서 그리고 초기 pH6.5 및 $30^{\circ}C$의 배양조건에서 10일 동안 발효시 최고 12.9%의 주정이 생산되었다.

• 한국주조공학회지
• /
• 제17권3호
• /
• pp.267-275
• /
• 1997

Fabrication of high strength Mg-Li-Al alloys by squeeze casting was established by the stabilization of melt and mold temperatures, applied pressure and the refining method. The entrapment of inclusions during pouring was prevented using 30 ppi alumina foam filter. The as-cast microstructure consists of a mixture of ${\alpha}$ and ${\beta}$ phases including AILi and $MgLi_2$, Al particles, which are distributed in the ${\beta}$ matrix. The grain sizes of gravity and squeeze casting alloys were 288 ${\mu}m$ and 207 ${\mu}m$ respectively. The addition of Al in Mg-Li alloys promoted the formation of second phase particles, which were adjusted to optimize the properties of Mg-Li-Al alloys. The Mg-10wt%Li-5wt%Al alloy after heat treatment at $350^{\circ}C$ for 1 hour showed the maximum hardness value. This is due to the facts that the amounts of ${\alpha}$ and ${\beta}$ phases and their distributions are dependent upon the solution treatment temperature, and that the amounts of AILi and $MgLi_2Al$ particles are dependent upon the Al content.

• 한국약용작물학회지
• /
• 제16권6호
• /
• pp.421-426
• /
• 2008

Three year-old peony (Paeonia. lactiflora Pall. cv. Taebaek) was cultivated in green-house at Jan. 15, Feb. 15, or Mar. 15, respectively. The mean of temperature during the forcing cultivation was higher (air; $1.0{\sim}11.1^{\circ}C$, soil; $1.1{\sim}7.4^{\circ}C$) than that of open-field condition. From sprouting to flowering in peony cultivated at Jan. 15 was about 54 days, which is shorted the cut flower periods (ca. 26 days) compared with the open-field cultivation. However, earlier forcing cultivars were very susceptible to pathogens such as powdery mildew or gray mold. The yield in green house was also lower than in the open-field cultivation. The content of bioactive compounds such as paeoniflorin and albiflorin in green-house cultivars was similar that of open-field cultivars. These results showed the forcing cultivation time of peony at Feb. 15 in green-house was most desirable for commercialization.

• Mycobiology
• /
• 제31권3호
• /
• pp.139-144
• /
• 2003

This study was conducted to investigate physiological characteristics of Trichoderma spp. isolated from Pleurotus spp. Damage tests of Pleurotus spp. and mycotoxins tests of Trichoderma spp. were also done. The optimal growth temperature of Trichoderma spp. was $27{\sim}30^{\circ}C$. Although, T. longibrachiatum was able to grow at $37^{\circ}C$ and grew $30{\sim}40$ times faster than Pleurotus. The colony colour on PDA medium of T. cf. virens was yellowish green, T. longibrachiatum was yellow, and T. harzianum was turning to bright green. In damage tests of Pleurotus by Trichoderma, T. cf. virens caused the most severe damage to Pleurotus. T. longibrachiatum and T. harzianum caused less damage on Pleurotus but were able to cause greater damage to P. eryngii. One of the mushroom cultivars, P. ostreatus 8 was the most resistant to all Trichoderma spp.. Chitinolytic mycotoxin released by Trichoderma spp. caused 52.7% damage to Pleurotus. Mycotoxins released by T. longibrachiatum caused the greatest damaged(78.6%) on P. eryngii.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.110-113
• /
• 2016

(YNdSm)-Ba-Cu-O system high Tc composite superconductors were directionally grown by zone melting process, having large temperature gradient, in air atmosphere. Cylindrical green rods of $(YNdSm)_{1.8}Ba_{2.4}Cu_{3.4}O_x$ [(YNS)1.8]composite oxides by CIP (cold isostatic pressing) method using rubber mold were fabricated. The microstructure and superconducting properties were investigated by XRD, TEM and SQUID magnetometer. The size of nonsuperconducting $(YNdSm)_2BaCuO_5$ inclusions of the melt-textured (YNS)1.8 sample with $CeO_2$ additive were remarkably reduced and uniformly distributed within the superconducting (YNS)1.8 matrix. (YNS)1.8 samples, with / without $CeO_2$ additive, showed an onset $T_c{\geq}90K$ and sharp superconducting transition. The critical current density $J_c$ value of the (YNdSm)1.8 superconductor with $CeO_2$ additive were 840 A, $1.2{\times}104A/cm^2$ in 77 K, 0 Tesla by direct current transport method.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.198-202
• /
• 2020

The effect of sublimable vehicles on the pore structure of Cu fabricated by freeze drying is investigated. The 5 vol% CuO-dispersed slurries with camphene and various camphor-naphthalene compositions are frozen in a Teflon mold at -25℃, followed by sublimation at room temperature. After hydrogen reduction at 300℃ and sintering at 600 ℃, the green bodies of CuO are completely converted to Cu with various pore structures. The sintered samples prepared using CuO/camphene slurries show large pores that are aligned parallel to the sublimable vehicle growth direction. In addition, a dense microstructure is observed in the bottom section of the specimen where the solidification heat was released, owing to the difference in the solidification behavior of the camphene crystals. The porous Cu shows different pore structures, such as dendritic, rod-like, and plate shaped, depending on the composition of the camphornaphthalene system. The change in pore structure is explained by the crystal growth behavior of primary camphor and eutectic and primary naphthalene.

• 한국주조공학회지
• /
• 제24권6호
• /
• pp.314-322
• /
• 2004

The CaO crucible is expected to serve as a useful tool for melting Ti and its alloys due to its thermodynamic stability. However, tjere still remain problems that need to be resolved in the melting of Ti and its alloys to enable commerical use. The cause of the defects of Ti-6AI-4V alloy castings melted in the CaO crucible were examined and compared with induction skull melting. The key factors of the melting technique using the CaO crucible, affecting the quality of Ti-6AI-4V alloy castings, were investigated. Defects of the Ti-6AI-4V alloy castings are caused by the chemical reduction of CaO by Ti. Pressurizing with argon gas in a vacuum induction chamber is effective for reducing the defects. Preheating of the charged material in the crucible and quick pouring into a mold of lower temperature, just after melting down, are important for produsing sound Ti-6AI-4V castings.