• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.29-41
• /
• 1998

Despite orthodontic treatment(tooth moving) is dynamic act many orthodontists have used mainly static evaluation method for evaluating effectiveness of the orthodontic appliances. They want to find which is better appliance, especially in the treatment results and treatment period when they chose one appliance from sugessted appliances for obtaining same treatment goal. The author and colleagues invented and manufactured new machine for getting information about the relative effectiveness from many suggested orthodontic appliances and we named it Calorific machine. We used this Calorinc machine to find the relative differences about tooth moving mechanism and tooth moving time between the Burstone's PLA(single force mechanism) and Molar-up's PLA(couple mechanism) for correcting the posterior cross bite. We measured the distance of tooth moving on the occlusal X-ray film and recorded the moving time of the anchored(control elctro-thermal tooth) and lingually tipped lower second molars(experimental electro-thermal tooth) and then processed paired t-est by SAS program. The results were as follows. 1. Molar-up's PLA showed more extrusive and horizontal movement than Burstone's PLA at the lingually tipped molar(p=0.0000). 2. There is no finding of tooth movement by Molar-up's PLA at the uprighted molar(p=o.3475) but Burstone's PLA showed a little change(0.2 m) at the same molar(p=0.0001). 3. Burstone's PLA took 17.8 minutes for tooth moving but Molar-up's PLA took only 3.8 minutes(p=0.0001)

• Journal of Korean Dental Science
• /
• v.15 no.2
• /
• pp.181-189
• /
• 2022

Molar incisor malformation (MIM) has been introduced as a new type of dental anomaly. Currently, the morphological and histological characteristics of MIM are known; however, its etiology has not been clearly identified. To date, the long-term prognosis of first permanent molars (FPM) affected by MIM has rarely been reported, and few treatment guidelines have been established. The purpose of this case report was to present guidelines for the extraction of FPM affected by MIM, depending on the presence of the third molar. In patients with a third molar, spontaneous mesial shift of the posterior molars might be induced by extracting the FPM at an appropriate time, that is, when the second permanent molar is at an early furcation stage of the tooth. However, it is recommended that FPM be preserved for as long as possible if a third molar does not exist. When an FPM needs to be extracted, it is suggested to consider space maintenance.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.219-227
• /
• 2020

Tooth eruption involves a complex developmental process of tooth migration from the dental follicular origin to the final occlusion position in the oral cavity via the alveolar process. Disturbance of tooth eruption can occur at any point in a series of eruption stages; however, horizontal impaction of the mandibular first molar and primary retention of the primary mandibular second molar are rarely observed simultaneously. This study describes the treatment for two cases of horizontally impacted first molar with primary retention of primary molar. The primary retention of the primary mandibular second molar was extracted, and orthodontic traction was applied to the horizontally impacted primary mandibular first molar. Subsequently, displacement of the premolar tooth bud was improved and space regaining for eruption was achieved, guiding to normal eruption of the first molar.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.721-733
• /
• 1994

Orthodontic tooth movement is closely related to the stress on the periodontal tissue. In this research the finite element method was used to observe the stress distribution and to find the best condition for effective tooth movement in the case of unilateral molar expansion. The author constructed the model of lower dental arch of average Korean adult and used $.032'\times.032'\times60mm$ TMA wire. The wire was deflected in the horizontal and vertical direction to give the 16 conditions. The following results were obtained ; 1. When the moment and force were controlled properly the movement of anchor tooth was minimized and the movement of moving tooth was maximized. 2. As the initial horizontal deflection increased the buccal displacement of both teeth was also increased. As the initial horizontal deflection increased the lingual movement of anchor tooth and the buccal movement of moving tooth increased. 3. When the initial horizontal and vertical deflection rate was 1.5 the effective movement of moving tooth was observed with minimal displacement of anchor tooth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.383-399
• /
• 1998

Tooth development is usually described in four stages such as bud stage, cap stage, bell stage and crown stage. Exact time of appearance of tooth primordia is different among reports, and up to now there is no timetable regarding initial tooth development. To understand the congenital malformations and other disorders of the orofacial region, there is a need to establish a standard timetable on early tooth development. Till now, studies on the tooth development were mainly on later fetuses, and only few reports on early stage. Also, there were no reports on the time when bud stage turns to cap stage, and cap stage to bell stage. In this study, external morphology of face and the early development of the tooth, and transition of bud stage to cap stage, cap stage to bell stage were studied using 27 staged human embryos and 9 serially sectioned human fetuses. The results are as follows: 1. Mandibular region was formed by union of both mandibular arch at stage 15, and maxillary region by union of maxillary arch, medial nasal prominence, and intermaxillary segment at stage 19. 2. Ectodermal thickening which represents the primordia of tooth appeared in mandibular region at stage 13, and maxillary region at stage 15. 3. Bud stage began from mandibular primary central incisor at stage 17, and maxillary primary central incisor at stage 18. And the sequence of appearance was in the mandibular primary lateral incisor at stage 19, maxillary primary lateral incisor at stage 20, mandibular primary canine at stage 22, maxillary primary canine and primary first molar at stage 23, madibular primary first molar and maxillary primary second molar at 9th week, and mandibular primary second molar at 10th week of development. 4. Cap stage began from the primary anterior teeth at 9th week, and primary second molar still had the characteristics of cap stage at 12th week of development. 5. Transition to bell stage started from the primary anterior teeth at 12th week, and primary second molar started at 16th week of development. 6. Trnasition to crown stage started from primary anterior teeth at 16th week, and primary second molar at 26th week of development.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.375-387
• /
• 1995

The purpose of this study was to quantitatively evaluated experimental tooth root resorption for digital radiography. For this study, experimentally three root sites were used, and radiograms were taken with standardized apparatus. Digital imaging system were consisted of NEC PC-980l(computer), TRINITRON(monitor), SONY XC-711 CCD camera. The display monitor had a resolution of 512X512 pixels. The obtained results were as follows: 1. In the difference of the four X-ray film of the contrast correction, the contrast difference was one gray scale variation at mean value. 2. Viewing of the view box of the periapical radiographs, experimental tooth root resorption of the periapical area of the first premolar, middle of mesial surface of the first molar mesial root, middle of lingual surface of the first molar distal root were recognized by increased diameter. 3. On the analysis by histogram, the periapical area of the first premolar, the middle of mesial surface of the first molar mesial root were each recognized tooth root resorption of the 5,6,7 pixel, 2,4,5 pixel by increased diameter. 4. On the analysis by histogram, the middle of lingual surface of the first molar distal root was each recognized tooth root resorption of the none, 3,6 pixel by increased diameter.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.2
• /
• pp.167-170
• /
• 1994

The surgical removal of the wisdom teeth is obligate when forceps extraction fails or when the wisdom teeth are impacted. The surgical removal of impacted maxillary third molars is a commonly performed procedure usually associated with few complications & little morbidity. The most frequent complications are tooth root fracture, maxillary tuberosity fracture, tooth displacement into the maxillary sinus & oroantral fistula formation. A rarely reported complication is the displacement of a tooth into the infratemporal fossa. The method of prevention of this complication is by the placement of either a finger or periosteal elevator posterior to the tooth during extraction. To remove the displaced upper third molar is very difficult & has many complications, e.g., persistent bleeding & nerve damage. When the wisdom teeth is displaced, it is initially necessary to gain access to bone by developing a mucoperiosteal path of delivery is developed by additional bone removal or, preferably planned sectioning of the tooth. There are many approaching techniques to remove the displaced upper third molar. This following report describes the surgical technique of displaced upper third molar in the pterygopalatine fassa by the midpalatal ＆transpharyngeal approach.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.526-534
• /
• 1993

The purpose of this study was to evaluate the changes of the tooth mobility and maximal bite force over 4 weeks following initial therapy on the periodontal disease. Tooth mobility and maximal bite force due to change of viscoelastic property of periodontium were influenced by inflammation of periodontal tissue. 10 patients with the chronic adult periodontitis participated in this study. Each tooth was divided into anterior areas, premolar areas and molar areas. Tooth mobility was tested using Periotest(Siemens Co. Germany) and maximal bite force was evaluated with MPM-3000(Nihon kohden Co. Japan). Tooth mobility and maximal bite force were recorded at the initial examination, 1, 2, 3 and 4 weeks following initial therapy. All data were analyzed statistically. The obtained results were as follows ; 1. The changes of the tooth mobility following initial therapy were generally decreased in maxilla, showing the significant decrease at 1 and 4 weeks on premolar areas (p<0. 05). 2. The changes of the tooth mobility following initial therapy were generally decreased in mandible, however this changes were not statistically significant. 3. The changes of the maximal bite force following initial therapy in maxilla were significantly increased at 3 and 4 weeks on anterior areas, at 4 weeks on premolar areas (p<0. 05). These were decreased at 1 week on molar areas, but generally increasing with time. 4. The changes of the maximal bite force following initial therapy in mandible were significantly increased at 3 and 4 weeks on anterior areas (p<0. 05, p<0. 01). These were decreased at 1 week on premolar but molar areas, and generally increasing with time. 5. As tooth mobility increased, maximal bite force decreased with significance (p<0. 01), and they had high negative correlation on anterior areas but low negative correlation on premolar and molar areas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.324-330
• /
• 2014

In case of implant-tooth connected prosthesis, a natural tooth tends to intrude. There are several mechanisms that explain an intrusion phenomenon. So it is reco mmended not to connect an implant with a natural tooth. A 68-year-old female had upper left $2^{nd}$ premolar and $2^{nd}$ molar extracted and underwent implant surgery on the missing area. We made an implant prosthesis and treated upper left $1^{st}$ molar with a gold crown. 2.5 year later, the patient complained about loose proximal contact and food impaction between upper left $1^{st}$ molar and $2^{nd}$ molar. Mesial side of upper left $2^{nd}$ molar implant prosthesis was soldered so that proximal contact became tight again. But after 7 months, about 2 mm intrusion of upper left $1^{st}$ molar occurred, and the patient felt periodontally originated pain on intruded upper left $1^{st}$ molar. After the gold crown on upper left $1^{st}$ molar was removed, extrusion occurred and pain was relived.

• International Journal of Oral Biology
• /
• v.40 no.3
• /
• pp.151-159
• /
• 2015

Odontogenic cells express many genes spatiotemporally through complex and intricate processes during tooth formation. Therefore, investigating them during the tooth development has been an important subject for the better understanding of tooth morphogenesis. The present study was performed to identify the genetic profiles which are involved in the morphological changes during the different stages of rat tooth development using the Agilent Rat Oligonucleotide Microarrays. Morphologically, the maxillary 3rd molar germ at 10 days post-partum (dpp) was at the cap/bell stage. In contrast, the maxillary 2nd molar germ showed the root development stage. After microarray analysis, there were a considerable number of up- or down-regulated genes in the 3rd and the 2nd molar germ cells during tooth morphogenesis. Several differentially expressed genes for nerve supply were further studied. Among them, neuroligin 1 (Nlgn 1) was gradually downregulated during tooth development both at the transcription and the translation level. Also, Nlgn 1 was mostly localized in the dental sac, which is an important component yielding the nerve supply. This genetic profiling study proposed that many genes may be implicated in the biological processes for the dental hard tissue formation and, furthermore, may allow the identification of the key genes involved in the nerve supply to the dental sac.