• Journal of Biosystems Engineering
• /
• 제40권2호
• /
• pp.137-144
• /
• 2015

Purpose: The high energy requirement of extraction of oil from jatropha seed and reduction of loss in oil content between whole seed and kernel of jatropha necessitate seed shelling. The purpose of this study is to develop and evaluate the performance of a jatropha seed shelling machine based on seed moisture content. Methods: A shelling machine was designed and constructed for jatropha seed. The components are frame, hopper, shelling chamber, concave, and blower with discharge units. The performance evaluation of the machine was carried out by determining parameters such as percentage of whole kernel recovered, percentage of broken kernel recovered, percentage of partially shelled seed, percentage of unshelled seed, machine capacity, machine efficiency, and shelling efficiency. All of the parameters were evaluated at five different moisture levels: 8.00%, 9.37%, 10.77%, 12.21%, and 13.68% w.b.). Results: The shelling efficiency of the machine increased with increase in seed moisture content; the percentage of whole kernel recovered and percentage of partially shelled seed decreased with increase in moisture content; and percentage of broken kernel, machine efficiency, and percentage of unshelled seed followed a sinusoidal trend with moisture content variation. Conclusion: The best operating condition for the shelling machine was at a moisture content of 8.00% w.b., at which the maximum percentage of whole kernel recovered was 23.23% at a shelling efficiency of 73.95%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.134-135
• /
• 2016

This study aims to compare relative moisture content and gravity moisture content in calculating the rational percentage of moisture content. High-strength concrete, which is made of blast-furnace slag and silica fume, was used as the compound for this study, and the specimens were made into a saturated condition through the vacuum suction. According to the results of this study, all specimens were completely dried when they were under the temperature of 105℃ for more than 31 days. They were fully saturated after 72 hours through vacuum suction. In addition, relative moisture content responded more sensitively to moisture content than gravity moisture content did, so it can be concluded that relative moisture content is better in calculating the rational percentage of moisture content.

• Water Engineering Research
• /
• 제4권1호
• /
• pp.31-43
• /
• 2003

The impacts of climate change on soil moisture in sub - Arctic watershed simulated by using the hydrologic model. A range of arbitrary changes in temperature and precipitation are applied to the runoff model to study the sensitivity of soil moisture due to potential changes in precipitation and temperature. The sensitivity analysis indicates that changes in precipitation are always amplified in soil moisture with the amplification factor for flow. The change in precipitation has effect on the soil moisture in the catchment. The percentage change in soil moisture levels can be greater than the percentage change in precipitation. Compared to precipitation, temperature increases or decreases alone have impacts on the soil moisture. These results show the potential for climate change to bring about soil moisture that may require a significant planning response. They are also indicative of the fact that hydrological impacts affecting water supply may be important in consider-ing the cost and benefits of potential climate change.

• 한국연초학회지
• /
• 제6권2호
• /
• pp.215-219
• /
• 1984

This experiment was conducted to investigate the effect of physical and chemical characteristics of lower grade tobacco with treatment of ozone. In ozonization of low grade tobacco, optimum moisture was 20 percentage, and decrease ratio of content of tobacco leaf was 30 percentage in nicotine , 15.9 percentage in total volatile base, 10.5 percentage in petroleum-ether-extract, 29.5 percentage in solanesol, and decrease ratio of cigarette smoke composition was 31 percentage in nicotine, 6.08 percentage in tar.

• 한국작물학회지
• /
• 제31권2호
• /
• pp.150-155
• /
• 1986

콩을 탈곡기로 탈곡할 때 종실손상율이 낮으면서 발아율이 높은 종실의 수분함량과 탈곡기의 적정 급동속도를 구명하여 기웅탈곡시에 필요한 기초자료로 활용코자 시험을 실행하여 얻어진 결과를 요약하면 다음과 같다. 1. 성숙시 식물체 각 부위별 수분함량은 대입종인 황금콩의 경우 줄기, 종실, 콩깍지 순으로 소입종인 단엽콩은 줄기, 콩깍지, 종실 순으로 많았다. 2. 황금콩과 단엽콩의 성숙후 식물체 부위별 수분함량과 수분함량 감소정도는 줄기 및 종실에서는 비슷하였으나 콩깍지는 소입종인 단엽콩이 성숙후 7 일까지는 황금콩보다 높았고 그 후에는 차이가 없었다. 3. 성숙후 7 일의 일중의 줄기, 종실, 콩깍지의 수분함량 변이는 시간이 경과함에 따라 수분함량이 감소하는 경향이며 성숙후 14일에는 오전 11시까지 꼬투리의 수분함량이 종실의 수분함량보다 높았으나 그 이후에는 종실의 수분함량이 더 높았다. 4. 콩 탈곡시 탈곡기의 급동속도가 빨라지거나 종실수분함량이 많아질수록 종실보상율은 증가는 경향이며 대입종인 황금콩이 소입종인 단엽콩보다 종실 보상입율이 높았다. 5. 보상입율과 발아율을 고려할 때 탈곡기의 적정급동속도는 11 m/sec.가 적당한 것 같았다. 6. 탈곡에 알맞는 종실의 수분함량은 수량, 보상입율, 발아율, 작업속도 및 건조작업 등을 고려할 때 종실의 수분함양이 15∼20%가 적당한 것 같았다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.108-116
• /
• 2010

This paper explains the effects of wood drying on treatability (as determined by water uptake) of Japanese red pine (Pinus densiflora S. et Z.) at the sevenmoisture content (MC) levels above and below the fiber saturation point (FSP). According to the experimental results, it was found that water uptake (as the percentage of void volume filledwith distilled water, VVF%) was influenced by level of moisture content and percentage of void volume filled was improved effectively by kiln drying process. A significant relationship between moisture content and treatability was established. Permeability and liquid uptake were decreased above the FSP due to the effect of the less void space available in wood. Even though increased liquid uptake was observed at lower moisture content, no significant differences was observed moisture content below 20%. Therefore, this species need to be initially dried below FSP before treated with liquids. But drying moisture content below 10% might not be economical for the commercial purpose comparing drying the wood between 10 and 20% moisture content. The result of this study inferred that the treatability of pine wood can be improved by reducing the moisture content up to a certain level of 10~20% for allowing better performance.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.81-91
• /
• 1999

Fuel characteristics of sewage sludge as required for the fluidized bed incinerators have been evaluated. Sewage sludge is basically a solid fuel with high percentage of moisture. Moisture content of the fuel directly affects the heating value of the fuel and the exhaust gas composition. When the sludge of transported into the incinerator, sludge cake is subject to the mixing, break-up and heat-up. Fluidization process would enhance these physical processes. The sludge fuel could then undergo the moisture evaporation and devolatilization process. Subsequent oxidation of volatiles as well as the remaining char would then follow. Sludge samples are characterized with high percentage of volatiles out of total combustibles. Quantitative understanding of above listed subprocesses would certainly help in the utilization of fluidized bed incinerators. A limited set of fuel characterization tests including calorimetric analysis, proximate analysis, elemental analysis and thermogravimetric analysis were conducted for the selected sludge samples. The measurement reasults of sludge samples were reported along with some published data. Limited experience in the actual incinerator plant is also presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.10-16
• /
• 1996

This study is aimed for investigating a decision of the saturated surface dry of crushed stone sand and measuring the moisture with increasing percentage of VFS(Very Fine Sand) replacement each crushed stone sand. The results indicated that moisture of crushed stone sand is generally increased with increasing percentage of VFS replacement and the rate of increase of moisture is about 30% every time that VFS replacement increases 3.5%. Also the saturated surface dry for crushed stone sane is proposed as a point of time where shape of flow-cone first slumps in this paper.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.212-213
• /
• 2014

In case of fire spray protection sheath, fire resisting capacity is assessed for each material and installation method according to fire-resistive construction recognition. This study reviews effects of the percentage of water content that exist in fire spray protection sheath during the assess process of fire resisting capacity on fire resisting capacity, and changes of the percentage of water content according to temperature conditions. As a result of exams, as curing temperature is higher and thickness of specimen is thinner, decrease of the percentage of water content becomes significant.

• International Journal of Computer Science & Network Security
• /
• 제22권12호
• /
• pp.71-78
• /
• 2022

Electronic measuring devices have an important role in agricultural projects and in various fields. Electronic measuring devices play a vital role in controlling and saving soil information. They are designed to measure the temperature, acidity and moisture of the soil. In this paper, a new methodology to manage irrigation and soil fertility using an electronic system is proposed. This is designed to operate the electronic irrigation and adds inorganic fertilizers automatically. This paper also explains the concept of remote management and control of agricultural projects using electronic soil measurement devices. The proposed methodology is aimed at managing the electronic irrigation process, reading the moisture percentage, elements of soil and controlling the addition of inorganic fertilizers. The system also helps in sending alert messages to the user when an error occurs in measuring the percentage of soil moisture specified for crop and a warning message when change happens to the fertility of soil as many workers find difficulty in daily checking of soil and operating agricultural machines such as irrigation machine and soil fertilizing machine, especially in large projects.