• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.20-28
• /
• 2008

This study was carried out to provide the so-called circumferential slicing method for investigating radial distributions of the tangential strains and of moisture contents within the log cross section (LC) of Kalopanax pictus during indoor drying it. While the heartwood showed an almost uniform moisture content distribution in the range of about 50~55% in case of the green wood, it has gradually decreased toward the outer side, showing about 19% of moisture content difference from the innermost slice. Although the moisture gradient along the radial direction has gradually become gentle as drying progresses, the sapwood of the outer side represented the moisture contents below the fiber saturation point after 24 hours of drying while the heartwood in the inner part showed the moisture contents higher than the fiber saturation point. The pith side was laid under the tensile stress after 24 hours of drying, and then gradually decreasing toward the bark side, and showed the distribution being switched again to the tensile stress on the bark side. As the drying has progressed, this trend got more intensified, and finally showed the U-shaped distribution model after 48 hours of drying. The circumferential slice test is considered to be suitable in quantitatively determining the tangential strains and moisture content within a LC.

• Journal of the Korean Wood Science and Technology
• /
• 제31권1호
• /
• pp.10-15
• /
• 2003

본 연구는 주요 국산 활엽수재 원반에서 채취한 원주상(圓周狀)슬라이스를 오-븐에서 급속건조하면서 각 원반내 함수율의 방사방향 분포추이를 조사하기 위하여 수행하였다. 느티나무의 경우 변재부 또는 심변재경계부가 이미 섬유포화점 이하의 함수율에 도달하였으나, 최내측슬라이스는 아직도 약 40% 정도의 높은 함수율을 나타내었다. 벚나무의 경우 최내측 슬라이스와 바로 인접한 슬라이스간의 수분경사가 건조시간이 경과하면서 더욱 심해지는 경향을 보였다. 음나무 원반에서는 생재상태에서는 심재부의 함수율이 변재부보다 약 23% 정도 더 높은 분포를 보였으며, 이러한 분포유형이 평균함수율 약 15%일 때까지도 지속되었다. 참중나무의 경우 전(全)건조기간에 걸쳐 외주측의 심변재혼합 슬라이스들과 최내측 슬라이스의 함수율이 나머지 부위의 함수율보다 낮은 값을 나타내었다.

• Advances in aircraft and spacecraft science
• /
• 제7권2호
• /
• pp.169-186
• /
• 2020

Based upon differential quadrature method (DQM) and nonlocal strain gradient theory (NSGT), mechanical-hygro-thermal vibrational analyzes of shear deformable porous functionally graded (FG) nanoplate on visco-elastic medium has been performed. The presented formulation incorporates two scale factors for examining vibrational behaviors of nano-dimension plates more accurately. The material properties for FG plate are porosity-dependent and defined employing a modified power-law form. It is supposed that the nano-size plate is exposed to hygro-thermal and variable compressive mechanical loadings. The governing equations achieved by Hamilton's principle are solved implementing DQM. Presented results indicate the prominence of moisture/temperature variation, damping factor, material gradient index, nonlocal coefficient, strain gradient coefficient and porosities on vibrational frequencies of FG nano-size plate.

• 한국연초학회지
• /
• 제8권1호
• /
• pp.13-21
• /
• 1986

The fragility, which express the fineness index, increased linearly with the moisture content for various tobacco shreds and showed a high correlation to the moisture content. Then, fineness index (FIs) at reference moisture content(l2.5%) was obtained by following equation. FIs=FIm+A(12.5-Mm) A" denote the gradient of simple linear regression equation between the fineness index and moisture content. FIm; the fineness index measured at the standard moisture content(12.5%). The characteristics of fragility concerning with some kinds of tobacco raw materials, stalk position, moisture content and storaged time were investigated. The following results were obtained. 1. The moisture content range of less fragile of tobacco raw material was from 16% to 20%. whereas the rolled process sheet tobacco was from 12% to 16%. 2. The Bright yellow and the paper process sheet tobacco were less fragile than that of the other tobacco raw materials. 3. The leaves were more distant from middle stalk position, and its become more fragile. 4. Physical properties of the storaged tobacco leaves were determined as a function of each storageunction of each storage time. The long-term storaged leaves(more than 3 years) were slightly lighter weight, more fragility and lower equilbrium moisture content than thos of the mid-term storaged leaves.(less than 3 years). 5. Contents of chemical component of the storaged leaves were determined every storage time. The long-term storaged leaves were slightly lower content of nicotine and chlorine than those of mid-term storaged leaves, but contents of crude fiber, total ash and calcium were increased significantly.

• Journal of the Korean Wood Science and Technology
• /
• 제28권2호
• /
• pp.19-24
• /
• 2000

본 논문에서는 목재시편의 횡단연적과 수분경사가 라디에타파인 심재와 번재의 초음파 전달속도에 미치는 효과를 조사하였다. 각 수분경사 모델시편은 함수율이 다른 다섯 개의 소편을 배합하여 만들었다. 횡단면적이 작아질수록 초음파 전달속도는 심재와 변재 모두 4~8% 감소하였다. 수분경사 모델시편을 투과한 초음파 신호를 분석한 결과, 횡단면적이 클수록 저주파 신호가 고주파 신호보다 분명한 주류률 이루었다. 평균 함수율이 같더라도 수분경사가 다르면 시편의 초음파 전달속도는 다르게 나타났다. 초음파 전달속도와 수분경사 모델시편의 내층 평균 함수율의 분포는 함수율에 따라 세 가지 서로 다른 형태를 나타냄이 밝혀졌다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.75-80
• /
• 1996

The purpose of this study is to clarify the mechanism of moisture transfer depend on the thickness of the spruce(Picea sitchensis Carr.). Therefore, as the basic research of moisture transmission, the amount of moisture transmission and the moisture distribution in specimens and temperature of it's surfaces in vapor transmission process were investigated. The experiment was conducted in a steady state. and the moisture distribution was measured by knife cutting and weighing the specimens. The following conclusions were obtained ; 1. It can be found that distribution of moisture in the specimen can be approximated by two different straight lines intersecting at nine or ten percent moisture content. The amount of moisture movement defends on the gradient of moisture in the wood. 2. It is investigated that the wood surface moisture contents(MCs) are less for thinner specimens than for thick ones on the absorption side. On the other hand, the wood surface MCs are greater for thinner specimens than for thick ones on the desorption side. The main factor that affects the EMC of wood would be temperature when the relative humidity of atmosphere is constant. The specimen generate heat with the absorption and desorption process. In addition, the velocities of moisture transmission varied with the thicknesses of specimens. If the temperature of wood becomes greater, its MC decreases. Then the difference between surface MC and EMC of adsorption and desorption side becomes greater for thinner specimens. Therefore it is considered that the coefficients of moisture transfer decreases with the increases of the specimens' thicknesses.

• 지질공학
• /
• 제15권3호
• /
• pp.281-288
• /
• 2005

본 연구에서 는 복소유전율상수 반응으로부터 벤토나이트 공시체의 물성치인 체적함수비와 수분분포 특성 을 파악하기 위하여 수행되었다. 벤토나이트 재료는 현재 폐기물처분장에서 차수재료로 널리 이용되고 있다. 차수재료의 경우, 일반적으로 투수계수가 $10^{-7}\;cm/sec$ 이하로 작아야 한다. 난투수성 재료에 대해 온도구배 에 따른 수분분포 특성을 파악하기 위해 FDR-V 측정 장비를 적용해 이들을 측정하였다. 그 결과, 복소유전율상수는 체적 함수비와 온도 증가에 따라 함께 증가함을 알 수 있었다. 온도구배 에 따른 복소유전율상수 변화는 수분이동이 온도가 높은 쪽에서 낮은 쪽으로 증가함을 확인하였으며, 이는 수분분포 특성을 보여 준 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권1호
• /
• pp.27-31
• /
• 2003

이 논문은 소나무와 일본잎갈나무의 변장 14.0 cm와 16.5 cm인 큰 정각재의 천연건조과정과 함수율분포에 관한 내용으로서 건조속도는 건조개시 첫 8주 동안 비교적 컸었으나, 그 이후부터 점차 감소하였다. 생재에서 규격함수율 18% 수준까지 건조시간은 소나무 14.0 cm와 16.5 cm가 각각 26주와 32주이고, 일본잎갈나무의 경우는 각각 32주와 48주이었다. 이들 정각재의 재장방향과 두께방향의 수분경사는 비교적 완만하였다. 일본잎갈나무의 수분경사는 소나무의 것보다 컸었고, 일본잎갈나무의 변장의 크기가 수분경사에 미치는 영향은 소나무의 것보다 컸었다.

• 한국도로학회논문집
• /
• 제7권1호
• /
• pp.31-38
• /
• 2005

콘크리트의 타설 직후, 상대적으로 콘크리트는 높은 증기압을 갖게 되며, 주위의 대기는 낮은 증기압을 갖게 된다. 콘크리트와 대기 간의 증기압의 평형을 유지하려는 작용 때문에 콘크리트의 표면에서 대기로 수분이 이동하는 증발이 발생한다. 표면에서 일어나는 증발로 인하여 콘크리트의 내부에서도 증기압의 차이가 발생하며, 이로 인하여 콘크리트 내부의 수분이 서서히 표면으로 이동하는 수분확산이 일어난다 이 수분확산의 속도는 콘크리트의 소성 균열, 수화도, 강도와 같은 요인으로 작용하여 콘크리트의 품질에 크게 영향을 미친다. 본 논문에서는 콘크리트 수분확산의 지배방정식과 실내에서 측정된 콘크리트의 온도와 상대습도를 이용하여 초기재령의 콘크리트의 수분확산도를 역계산하였다. 역계산된 콘크리트의 수분확산도를 이용하여 콘크리트의 수분확산도 모형을 개발하였으며, 이를 입력값으로 사용하여 유한요소법에 의해 콘크리트의 상대습도를 계산하였다. 그 결과로서 계산된 상대습도는 측정된 상대습도와 대체로 일치하였다.

• Journal of Forest and Environmental Science
• /
• 제38권4호
• /
• pp.229-238
• /
• 2022

Q. mongolica and Q. dentata are representative species of deciduous forest communities in Korea and are known to be relatively resistant to soil drying condition among Korean oaks. This study attempted to elucidate the degree of competition and ecological niche characteristics of the two species by comparing the ecological responses of the two species according to soil moisture. Competition between Q. mongolica and Q. dentata was shown to be more intense under the conditions where moisture content was low than under the conditions where moisture content was high. As for the ecological niche overlaps of the two species for soil moisture, the structural traits of plant such as stem diameter overlapped the most, the traits of biomass such as petiole weight overlapped the least, and photosynthetic organ-related traits such as leaf width and length overlapped intermediately. When looking at the competition for soil moisture between the two species, it can be seen that Q. mongolica won in nine traits (leaf width length, leaf lamina length, leaf lamina weight, leaf petiole weight, leaf area, leaves weight, shoot weight, root weight, and plant weight) and Q. dentata won in the remaining seven traits (leaf petiole length, leaves number, stem length, stem diameter, stem weight, shoot length, and root length). Competition between the two species for the moisture environment of the soil was shown to be intense under the conditions where moisture content was low. The degree of competition between Q. dentata and Q. mongolica for soil moisture is high under the conditions where soil moisture content is low, and it is judged that Q. mongolica is more competitive for soil moisture than Q. dentata.