• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.304-312
• /
• 2018

This study reduced the number of hair bleachings and used a hair steamer machine to reduce hair damage during hair coloring. In addition, such treatment was given, focusing on the use of hair mist. When the $L^{\ast}a^{\ast}b^{\ast}$ values for bleached hair were measured using a spectrum colorimeter, the mist steamer-based hair revealed higher brightness. Hair damage was low when moisture contents were high after hair drying with the use of the mist steamer machine. The mist treatment-less hair showed more blurred cuticle boundaries than mist-treated hair. In other words, this confirms that cuticles are protected by the use of a mist steamer machine during hair bleaching. It appears that this could minimize hair loss and meet clients' aesthetic needs and satisfaction during color bleaching/coloring.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.3
• /
• pp.309-316
• /
• 2020

In this study, we investigated the protective effects of Ulva lactuca methanol extracts against ultraviolet B (UVB)-induced DNA damage in HaCaT cells. First, the contents of general and antioxidative nutrient contents of Ulva lactuca were measured. The moisture, carbohydrate, crude protein, crude fat and ash were 14.01%, 44.80%, 23.19%, 3.10% and 14.90%, respectively. Magnesium that acts as DNA repair enzyme cofactor was the most abundant mineral followed by Ca, P and Fe. The total phenolic and anthocyanoside contents of Ulva lactuca were 2.69 mg/g and 0.13 mg/g, respectively. Cells treated with Ulva lactuca methanol extracts for 24 hours post UVB exposure increased cell viability in a concentration-dependent manner compared to the non-treated control. Also, Ulva lactuca methanol extracts decreased the levels of UVB-induced DNA damage such as cyclobutane pyrimidine dimer and DNA damage response (DDR) proteins such as p-p53 and p21. These results suggest that Ulva lactuca methanol extracts comprising physiological active substances such as Mg, polyphenols and anthocyanosides promote DNA repair by regulating genes related with DDR.

• Journal of Adhesion and Interface
• /
• v.10 no.4
• /
• pp.182-190
• /
• 2009

In this work, effect of antistrip additives to reduce moisture damage of asphalt mixture were studied. Asphalt antistripping agents were prepared by condensation of formaldehyde with tetraethylene pentamine (TEPA), triethylenetetramine (TETA) and bis(hexamethylene)-triamine (BHMT), respectively. And also the metal type antistripping agent was prepatred by neutralization of stearic acid or palmitic acid with metal hydroxide. Mechanical characteristics of the asphalt mixture added antistripping agent were evaluated with Marshall stability, submerging residuals and coating rate. It was found that antistripping agent prepared in this study reduced moisture damages of asphalt mixtures. In particular, asphalt mixtures added BHMT and C/S (Calcium stearate hydroxide) antistripping agent showed highest submerging and coating rate. Because BHMT and C/S type antistripping agent was to improve bonding between asphalt and aggregate owing to increase of amine concentration and role of metal surfactant.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.57-62
• /
• 2012

The purpose of this paper is to find dangerous factors of a water purifier when water leaks due to inappropriate use and analyze the patterns of damaged parts in order to provide data for the examination of the cause of the problem. If the water purifier is inspected and managed by a non-specialist, when the FLC(Float Level Controller) at the top is inclined, water leakage may occur to the water purifier. The leaked water flows onto the cables and hoses and enters the thermostat terminal, heater, PCB, power supply connection connector, etc., becoming a dangerous factor that may cause a system failure, fire, etc. Due to the water that entered the input terminal, low noise and white smoke were generated at first. However, the flame gradually propagated due to the continuous inflow of moisture. It was found that when moisture reached the PCB, a carbonized conductive path was formed at the varistor terminal, input terminal, semiconductor device terminal, etc., and the flame became larger, which might result in a fire. From the metal microscope analysis of a damaged condenser terminal, it was found that the amorphous structure unique to copper cable disappeared, and voids, boundary surface and disorderly fine particles occurred. Also, in the case of the connector into which moisture penetrated, fusion and deformation occurred at the cable connection clips. The result of analysis of the power supply cable connector using a thermal image camera showed that most of the heat was generated from the cable connection clips and the temperature at the connection center was normal.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.131-141
• /
• 2017

PURPOSES : The main distress of asphalt pavements in monsoon climate regions are caused by water damage and plastic deformation due to repeated rain season and increased heavy vehicle traffic volume. In this study, the mechanical properties of polymer-modified warm mix asphalt (PWMA) materials are evaluated to use in monsoon climate regions such as Indonesia. METHODS : Comprehensive laboratory tests are conducted to evaluate moisture resistance and permanent deformation resistance for three different asphalt mixtures such as the Indonesian conventional hot-mix asphalt (HMA) mixture, the polymer-modified asphalt mixture, and the polymer-modified warm mix asphalt (PWMA) mixture. Dynamic immersion test and indirect tensile strength ratio test are performed to evaluate moisture resistance. The wheel tracking test is performed to evaluate rutting resistance. Additionally, the Hamburg wheel tracking test is performed to evaluate rutting and moisture resistances simultaneously. RESULTS :The dynamic immersion test results indicate that the PWMA mixture shows the highest resistance to moisture. The indirect tensile strength ratio test indicates that TSR values of PWMA mixture, Indonesian PMA mixture, and Indonesian HMA mixture show 87.2%, 84.1%, and 67.9%, respectively. The wheel tracking test results indicate that the PWMA mixture is found to be more resistant to plastic deformation than the Indonesian PMA. The dynamic stability values are 2,739 times/mm and 3,150 times/mm, respectively. Moreover, the Hamburg wheel tracking test results indicate that PWMA mixture is more resistant to plastic deformation than Indonesian PMA and HMA mixtures. CONCLUSIONS :Based on limited laboratory test results, it is concluded that rutting resistance and moisture susceptibility of the PWMA mixture is superior to Indonesian HMA and Indonesian PMA mixtures. It is postulated that PWMA mixture would be suitable for climate and traffic conditions in Indonesia.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3277-3283
• /
• 2010

In this study, in order to find effects of collagen manipulation on hair in permanent wave treatment, it was conducted measurement and analysis on hair curl formation, thickness, tensile strength, methylene blue absorbance, and moisture loss after manipulating concentration proportion of collagen in permanent wave treatment on normal hair. As a result, it was found that by contrast with applying the reductant, hair thickness, tensile strength, methylene blue absorbance, and moisture loss were decreased when applied collagen in permanent wave treatment the higher concentration proportion of collagen was applied, the less damage was occurred on hair However curl formation capacity was decreased in permanent wave treatment as concentration proportion of collagen was increased. Therefore, the appropriate concentration proportion of collagen was 2% in order to reduce hair damage in permanent wave treatment.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.4
• /
• pp.271-277
• /
• 2019

Background: Rehmannia glutinosa (Gaertn.) Libosch. ex Steud. has long been used as a traditional medicinal plant in Korea. This study was carried out to investigate the emergence conditions during the seedling periods in R. glutinosa. Methods and Results: The rhizomes of R. glutinosa variety (Jihwang 1) were harvested in the 22, March, 2018. The rhizomes were sown on in 50-cell plug trays. The emergence rates of seedlings at $15^{\circ}C$, $20^{\circ}C$, $25-40^{\circ}C$, and $45^{\circ}C$ treatment seedling were 1.3%, 96%, 100% and 0%, respectively. Rhizome rot was occurred at the temperature of $15^{\circ}C$ and $45^{\circ}C$. The emergence rates of seedlings in high moisture (HM), moderate moisture (MM) and low moisture (LM) treatments at $35^{\circ}C$ were 99.3%, 100%, and 0%, respectively. Drought damage was recorded in plant with the LM treatment. Seedling quality surveys were carried out at 10-days intervals from 10 to 60 days after sowing (DAS). Leaf length and leaf width were increasing until 50 DAS and the number of leaves was increasing until 60 DAS. Root length was increasing until 40 DAS, and then, flowering occurred from 30 to 60 DAS. Lastly, at 40 DAS, leaf aging and root enlargement was observed. Conclusions: We concluded that the emergence of seedlings was possible in the range of 20 to $40^{\circ}C$. Considering drying and rotting damage, we concluded that the moderate level of moisture is most appropriate for seedling emergence. In addition, we concluded that optimal seedling periods are between 30 and 40 DAS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.345-354
• /
• 2006

Drought brings on long term damage in contrast to flood, on economic loss in the region, and on ecologic and environmental disruptions. Drought is one of major natural disasters and gives a painful hardship to human beings. So we have tried to quantify the droughts for reducing drought damage and developed the drought indices for drought monitoring and management. The Palmer's drought severity index (PDSI) is widely used for the drought monitoring but it has the disadvanges and limitations in that the PDSI is estimated by considering just climate conditions as pointed out by many researchers. Thus this study uses the SWAT model which can consider soil conditions like soil type and land use in addition to climate conditions. We estimate soil water (SW) and soil moisture index (SMI) by SWAT which is a long term runoff simulation model. We apply the SWAT model to Soyang dam watershed for SMI estimation and compare SMI with PDSI for drought analysis. Say, we calibrate and validate the SWAT model by daily inflows of Soyang dam site and we estimate long term daily soil water. The estimated soil water is used for the computation of SMI based on the soil moisture deficit and we compare SMI with PDSI. As the results, we obtained the determination coefficient of 0.651 which means the SWAT model is applicable for drought monitoring and we can monitor drought in more high resolution by using GIS. So, we suggest that SMI based on the soil moisture deficit can be used for the drought monitoring and management.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.641-651
• /
• 2019

This study investigates three buildings arranged alongside at the same level, namely, the Josadang, the Buljojeon, and the Palsangjeon. Their backside is blocked by an embankment with an environmental condition unsuitable for wooden buildings. The pillar behind the Josadang had termite damage for which termite damage and environmental investigations had been conducted for the past four years. The termite damage was monitored four times using the termite detection dogs, and the environmental factors were surveyed 27 times, except during the winter season. As a result, the locations of the columns with a high frequency of responses from the termite detection dogs were found and damage was confirmed. According to the surface moisture content investigations, the surface moisture content was highest in the Josadang and lowest in the Buljojeon. After a statistical analysis, the mean, the median, and the mode values were compared. The difference between the mean and the median was found to be less, however, the mode varied significantly. The mode values of the Josadang and the Palsangjeon were 14.5% and 10.8%, respectively, higher than the 6.1% mode value of the Buljojeon. It was concluded that the temperature and the water content affected the termite damage, which increases if the temperature and the water content remain constant owing to the environmental factors.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.212-219
• /
• 2016

The sprayable waterproofing membrane is installed between shotcrete to provide crack bridging and hence prevent flow of liquid water as a waterproofing system. Because of its material characteristics, the sprayable membrane can be constructed at more complex structure than sheet membrane. The main component of the sprayable waterproofing membrane is a polymer-based material, therefore, moisture can migrate through sprayable waterproofing membrane materials by capillary and vapor diffusion mechanisms. The moisture transport mechanisms can have an influence on the degree of saturation and may influence the pore pressure and risk of freeze-thaw damage on concrete linings and membrane. In this study, long-term hygrothermal behavior was simulated with considering moisture transport and long-term effects on saturation of tunnel linings. From the simulation, due to water absorption and vapor transport properties of sprayable membrane, change of relative humidity and water content in tunnel lining can be evaluated.