• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.75-76
• /
• 2023

The construction industry's lack of experience and expertise makes it difficult for projects to realize the full benefits of implementing modular construction. Such project performance-hindering elements are often labeled as modular challenges. The added requirement for the transportation of the finished volumetric module is one aspect of the 'module transportation logistics,' the under-researched modular challenge that can prevent projects from incurring maximum cost and productivity benefits. The typical module transportation phases include lifting, transporting, and offloading. From conducting a literature review, this paper aims to investigate the equipment commonly adopted to lift and offload the module and validate its economic efficiency by comparing it with the alternative lifting/offloading equipment used in the two case projects. The results showed that hydraulic jacks are an economic alternative to the crane for lifting/offloading the module. The increase in single-module projects with smaller budgets made crane usage economically undesirable, and this study suggested a viable option for a more economical alternative.

• Journal of Information Processing Systems
• /
• 제18권6호
• /
• pp.763-769
• /
• 2022

Transportation allocation requires information such as storage location and order information. In order to guarantee the safe transmission and real-time sharing of information in all links, an intelligent transportation control system based on blockchain technology is designed. Firstly, the technical architecture of intelligent transportation information traceability blockchain and the overall architecture of intelligent transportation control system were designed. Secondly, the transportation management demand module and storage demand management module were designed, and the control process of each module was given. Then, the type of intelligent transportation vehicle was defined, the objective function of intelligent transportation control was designed, and the objective function of intelligent transportation control was constructed. Finally, the intelligent transportation control was realized by genetic algorithm. It was found that when the transportation order volume was 50×103, and the CPU occupancy of the designed system was only 11.8%. The reliability attenuation of the code deletion scheme was lower, indicating better performance of the designed system.

• 플랜트 저널
• /
• 제13권3호
• /
• pp.30-35
• /
• 2017

Module은 세부적으로 PAS(Pre-Assembled Steel structure), PAR(Pre-Assembled pipe Rack), PAU(Pre-Assembled Unit), VAU(Vendor Assembled Unit) 그리고 VPU(Vendor Package Unit)로 분류될 수 있다. 이러한 Module의 설계 및 제작 시에는 Stick built type 구조물과는 달리 육상 또는 해상 운송 조건이 고려되어야 하며, 운송 조건에 따른 Module division design이 수반되어야 한다. 육상 운송 및 설치를 위해서는 무게중심(Center of gravity) 관리가 중요하며, 해상 운송을 위해서는 구조물이 Sea acceleration force에 대해 안전성을 확보할 수 있도록 설계되어야 한다. 운송 조건 및 설치 방법은 구조물의 규모와 무게를 제한하게 되며, 이는 Module 대상 구조물 선정 시, 그리고 선정된 Module의 분할 계획 시 요구조건으로 작용하게 된다.

• 대한건축학회논문집:계획계
• /
• 제35권1호
• /
• pp.29-35
• /
• 2019

The unit modular system is a type of prefabricated construction method that completes the building by uniting the modular units on site by transporting the unit module structure manufactured in the factory to the site. Since the unit module structure is not only the frame but also the finished form including the inner and outer materials, it is most likely to be brought into the field. Therefore, not only the damage of the inner and outer materials but also deformation of frame structure due to the vibration generated during the transportation of the vehicle, And it is necessary to take appropriate methods when transporting the module structure. However, there are no methods to prevent modular structure damage due to vehicle vibration in domestic and foreign modular transportation guidelines or standards. In this study, we investigate the vibrations during the vehicle transportation of the module structure through the road driving test, identify the vibration frequency characteristics of the vehicle through FFT analysis, and propose a vibration reduction methods for module transportation.

• 한국농공학회논문집
• /
• 제48권7호
• /
• pp.73-86
• /
• 2006

Concentrated poultry production in the State of Alabama, U.S.A. results in excessive poultry litter. Application of poultry litter to pastures and row crops serves as a cheap alternative to commercial fertilizer. However, over the years, poultry litter application to perennial forage crops in the Appalachian Plateau region of North Alabama has resulted in phosphorus (P) buildup in soils. Phosphorus index (P-index) and comprehensive nutrient management plans (CNMP) are often used as a best management practice (BMP) for proper land application of litter. Because nutrient management planning is often not done for small animal feeding operations (AFOs), and also because, in case of excess litter, litter transportation infrastructure has not been developed, over application of poultry litter to near by area is a common practice. To alleviate this problem, optimal poultry litter management and transportation infrastructure needs to be developed. This paper presents a methodology to optimize poultry litter application and transportation through efficient nutrient management planning and transportation network analysis. The goal was accomplished through implementation of three important modules, a P-Index module, a CNMP module, and a transportation network analysis module within ArcGIS, a Geographic Information System (GIS). The CNMP and P-Index modules assist with land application of poultry litter at a rate that is protective of water quality, while the transportation network analysis module helps transport excess litter to areas requiring litter in the Appalachian Plateau and Black Belt (a nutrient-deficient area) regions. Once fully developed and implemented, such a system will help alleviate water quality problems in the Appalachian Plateau region and poor soil fertility problems in the Black Belt region by optimizing land application and transportation. The utility of the methodology is illustrated through a hypothetical case study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.788-793
• /
• 2001

Finite element analysis was carried out to investigate the integrity and reliability of boiler module during sea transportation. The boiler module was supported by steel structure to relieve the instantaneous shock from oceanic wave and its primary parts were strengthened with several reinforcements. Finned tube walls which were used in the furnace wall were assumed as orthotropic plates having equivalent material properties. The bank tubes were also equivalently modeled in accordance with ASME B31.1 for the convenience of finite element modeling. The calculation results were compared with the yield stress of the material. In particular, the bank tube stress, which was evaluated by converting the calculated stresses in equivalent tubes into those in original tubes by using the ratio of diameter, was also examined with yield stress.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 추계학술발표논문집
• /
• pp.101-104
• /
• 2000

본 연구는 우편물의 효율적인 수송을 위해 복합연계수송 개념을 도입한 Multi-commodity, Multi-modal Network Model과 이를 토대로 정식화하고 이를 적용 한 LHGO programming Model를 제안하고자 한다. 구축된 LINGO Model은 응용 Application내에 장착되어지는 Module로 구성가능하며 이를 GIS Tool인 GEOmania를 이용한 우편물 수송 DSS을 위한 Application 개발에 활용하고자 한다.

• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.145-154
• /
• 2001

This paper deals with a network model for the efficient transportation of post and consists of the formulation based on the network model and the LINGO programming model including the operations of the post transportation. This network model is represented by using Time Space Network. The generalized formulation is built up with the input variables and the decision variables, which are defined on the basis of the network model. And LINGO programming model to be proposed with DB and LINGO is constructed in consideration of how to manage the post transportation and the intermodal transport. The results of the model implementation were represented on Time Space Network and they are analyzed and verified. The LINGO programming model is used as the module to be set in application software. Specifically with using GEOmania, GIS tool, the LINGO Model is applied to develop the application for Mail Transportation Decision Support System.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.1993-1998
• /
• 2010

본 연구에서는 모바일 텔레매틱스와 수송기계 텔레매틱스를 융합한 모바일차량 텔레매틱스 (Mobile In Vehicle: MIV) 를 이용하여 수송기계를 무선으로 제어하고 차량항법이 가능한 범용 통합 제어모듈을 개발하였다. 근거리에 있는 차량을 목적지까지 무인 제어가 가능하도록 제어모듈을 구현하고 이를 하드웨어 시뮬레이션을 통해 검증하였으며, 특히 무선 제어 기술을 위해 Wi-Fi, TCP/IP 및 3G 통신망에서 제어가 가능하도록 범용 통합제어 모듈로 설계되어 원거리에 있는 수송기계의 각종 정보를 수집하고 각종 편의기능 확인 및 제어가 가능하도록 하였다. 본 연구에서 개발된 수송기계 무선제어 기술은 현재까지 특정 통신망에서만 사용 가능한 단순 제어모듈과 다르게 다양한 통신망에서 사용이 가능하여 범용화를 이룬 효율적인 모듈로서 향후 다양한 수송기계 제어 편의기능 개발에 유용하게 적용이 가능할 것이다.

• 디지털산업정보학회논문지
• /
• 제10권3호
• /
• pp.261-272
• /
• 2014

Home appliances go through a couple of packaging stages from the plant to consumers. The primary packaging, inner packaging for each part, happens for protection after products leave the plant. The secondary packaging happens in the unit of product, ensuring cushioning packaging to protect products from movement. The final tertiary packaging is for transportation and delivery. Each stage of product packaging, however, costs a lot of money because of disposable packaging materials used in each stage including vinyl, tapes, Styrofoam, and corrugated cardboards. Discarded packaging materials also cause environmental problems. In an effort to come up with a measure to solve those problems, this study proposed a plan to minimize logistics costs with semi-permanent packaging materials to replace disposable ones including Styrofoam, vinyl, and corrugated cardboards in the stages of inner packaging, cushioning packaging, product unit-based packaging, and transportation. The study also developed a model to cut down logistics costs by reducing various packaging stages including the primary, secondary, and tertiary stage only to the secondary one through module-type products instead of the transportation- and delivery-type ones, as well as demonstrated the excellence of the study through numerical analysis.