• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.600-607
• /
• 2006

For the effective operation of manufacturing system, FMS(Flexible Manufacturing System) and CIM(Computer Integrated Manufacturing) system are developed. In these systems, a machine tool is the target of integration in last 3 decades. In nowadays, the conventional concept of machine tools is changing to the autonomous manufacturing device based on knowledge-evolution through applying advanced information technology in which open architecture controller, high speed network and internet technology are contained. In this environment, a machine tool is not the target of integration but the subject of cooperation. In the future, a machine tool will be more improved in the form of a knowledge-evolution based device. In order to develop the knowledge-evolution based machine tools, this paper proposes the structure of knowledge evolution in M2M(Machine To Machine) and the scheme of a dialogue agent among agent-based modules such as a sensory module, a dialogue module, and an expert system. The dialogue agent has a role of interfacing with another machine for cooperation. To design the dialogue agent module in M2M environment, FIPA-OS and ping agent based on FIPA-OS are analyzed in this study. Through this, it is expected that the dialogue agent module can be more efficiently designed and the knowledge-evolution based machine tools can be hereafter more easily implemented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.8
• /
• pp.99-105
• /
• 2011

This paper is about the design of 3-axis magnetic sensor module which detects parking and moving vehicle. For the sensor module, MR Sensor from Honeywell of which maximum measurement range is ${\pm}2$[G] is used. It also consisted of amplifier and sensor filter and fabricated $30{\times}50$[mm] PCB. Fabricated sensor module produced helmholtz coil of which the length is 1.2[m] of 3-axis to know the performance. It installed sensor module at the center and measured the detected magnetic field. In result, 3-axis were detected as 0.2~0.3[mG] and the drift of the fluctuation of magnetic field was stabilized at 0.03[mG] unit. For the performance evaluation of the vehicle detection, after the entry and parking of the vehicle, variation of magnetic field was measured as 0.323~0.695[G] which the average 0.5[G] of the earth magnetic field was the center and the range of variation was confirmed as 0.37[G]. Therefore, the designed magnetic sensor can be used as the vehicle detection sensor module.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.3
• /
• pp.341-353
• /
• 2024

This paper presents the design results of a Multi-band Global Positioning System (GPS)/Korean Positioning System (KPS) Real-Time Kinematics (RTK) precise positioning simulator and evaluate its functionalities. The designed simulator consists of a trajectory generation module, a Radio Frequency (RF) signal generation module, a RF signal reception module, a coarse positioning module, a precise positioning module, and an error statistics reporting module. Simulations in realistic scenarios confirm that the proposed baseband simulator works appropriately. The developed simulator can adjust the type, number, band, and Pseudo Random Noise (PRN) code type of the satellite constellation in various ways, and the practical positioning performance can be tested. It can also reflect the channel influence at the actual RF stage and the influence during the initial synchronization and tracking process. Considering such advantages, the proposed simulator would be useful in future researches and developments related to KPS.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.1-6
• /
• 1998

In order to increase design efficiency, it is required to design steam boiler pressure parts systematically considering daily start-stop operation and load variation. The objective of this research is to develope an integrated system for increasing design efficiency of boiler pressure parts. The developed system consists of three program modules: (1) flexibility design module for the header stub considering fatigue life, (2) fatigue limit calculation and life evaluation module for the thick-walled boiler pressure part under cyclic operation using TRD301 code, (3) drawing automation module for the header and drum producing design drawings, welding data and bill of materials.

• Architectural research
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2002

Every year new tall buildings are being conceived, designed, and built with new schemes. Thus it is important to explore the factors that affect tall building design. Thus it is important to explore the tall building design factors. The planning and design of tall buildings require different criteria than those that exist in regular size buildings. Tall buildings are uniquely expressed by their structural systems where exterior esthetic and requirements of space drive the form and composition of the structural systems. Therefore the exploration of design factors is the key to achieve optimum building systems. Optimization as mentioned here is associated with the efficiency of the different building systems. To achieve an optimal system, there is a need for an understanding of the factors that affect on overall tall building design such as planning module, building function, lease span, floor-to-floor-height, building height (aspect ratio), structural system, environmental systems. In this paper a statistical approach will be used and will be based on data collected from the practice through a rigorous survey taken. This information is tabulated and analyzed. The major target of investigation will be lease span related to space requirement in the tall building planning. Factors related to lease spans, such as function, floor-to-floor height, planning module, building height, overall plan dimension, and plan ratio (building geometry), will be looked at carefully. IN conclusion, this approach of optimization can introduce a preliminary design guideline for tall building projects. The purpose of the paper should shed some light on the optimum tall building design criteria.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.166-171
• /
• 2008

In this paper, the optimization design module for the brake system of a vehicle is developed. As using this module, design variables, that minimize an object function and satisfy nonlinear constraint conditions, can be found easily. Before an optimization is operated, Plackett-Burman design, one of the factorial design methods, is used to choose the design variables which affect a response function significantly. Using the response surface analysis, second order recursive model function, which informs a relation between design variables and response function, is estimated. In order to verify the reliability of the model function, analysis of variances(ANOVA) table is used. The value of design variables which minimize the model function and satisfy the constraint conditions is predicted through Sequential Quadratic-Programming (SQP) method. As applying the above procedure to a real vehicle simulation model and comparing the values of object functions of a current and optimized system, the optimization results are verified.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.35-46
• /
• 2013

A parametric modeling method, one of the core technology of BIM (Building Information Modeling), is proposed for efficient 3D assembly design among components of a superstructure module of modular steel bridge. Assembly system is classified into 3 levels as LoD (Level of Details) for 3D assembly design of the parts. Components forming 3D shape of the parts are identified and defined as parameters, variables depending on parameters, or constants independent of the parameters. Then, spatial assembly rules among the parts are defined according to the assembly system. Positional relations among the identified shape components are defined for mating spatial position and geometrical relations are defined for constraining degree of freedom on X, Y, and Z axis. Finally, a standardized template is designed by applying the rules to 3D based assembly design for the parts of the superstructure module. In addition, applicability of the parametric modeling method is demonstrated by testing the shape variation of the superstructure module according to changing the defined parameters.

• Journal of Korea Water Resources Association
• /
• v.51 no.6
• /
• pp.491-501
• /
• 2018

This study presents a systematic framework to derive the best values of design and planning parameters for low impact development (LID) practices. LID was developed to rehabilitate the distorted hydrological cycle due to the rapid urbanization. This study uses Water Management Analysis Module (WMAM) to perform sensitivity analysis and multiple scenario analysis for LID design and planning parameters of Storm Water Management Model (SWMM). This procedure was applied to an urban watershed which have experienced rapid urbanization in recent years. As a result, the design and planning scenario derived by WMAM shows lower total flows and peak flow, and larger infiltration than arbitrary scenarios for LID design and planning parameters. In the future, economic analysis can be added for this application in the field.

• Journal of the Korea Society for Simulation
• /
• v.17 no.1
• /
• pp.43-52
• /
• 2008

The High Level Architecture(HLA) is the IEEE 1516 standard for interoperation between heterogeneous simulators which are developed with different languages and platforms. Run-Time Infrastructure(RTI) is a software which implements the HLA Interface Specification. With the development of time management service of RTI, it is necessary to consider an efficient design approach and an algorithm of Greatest Available Logical Time(GALT) computation. However, many time management services of existing RTIs have difficulty in modification and extension. Although some RTIs avoid this difficulty through modular design, they comply with not IEEE 1516 HLA/RTI but HLA 1.3. In addition, a lot of RTIs made use of well-known Mattern's algorithm for GALT computation. However, Mattern's algorithm has a few limitations for applying to IEEE 1516 HLA/RTI. This paper proposes a modular design and an implementation of time management service for IEEE 1516 HLA/RTI. We divided th time management service module into two sub-modules: a TIME module and a GALT module and used Mattern's algorithm improved for IEEE 1516 HLARTI. The paper also contains several experimental results in order to evaluate our time management service module.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.3
• /
• pp.71-78
• /
• 2021

Purpose: It is important to plan the ward module at a time when the size of beds, the floor area, and the construction budget are all set prior to the hospital design. In this context this study aims (1) to derive various factors affecting the ward module, and (2) to analyze the appropriate room module according to the type. Methods: Design factors related to hospital modules are derived through precedential studies, and the types of ward elevation are classified by reviewing the drawings of 18 case hospitals. And the detailed dimensions and area of the derived elements are analyzed. Results: The X-axis modules of the ward are switched to long span structural columns of 9.9 m, 12.6 m and 13.2 m, but the ward modules still represent 6.6 m. The Y-axis module of the ward shows a dimension of 9 to 9.9m in the process of changing a multi-person room into a four-person room. Type A of curtain wall with columns located on the wall of the room and type B of curtain wall located in the center of the room are analyzed due to their variations. The square window type, which forms the elevation of the square window by exposing the columns to the elevation, and the outframe type, which protrudes from the structural columns and beams, have elevation designs limited. There are, however, no obstacles to the interior space of the hospital room, so the wall composition and furniture arrangement are expected to be free. The ward area of Curtain Wall Type A, which can secure an effective area of 5.9m*5.0m, are 52.1m². The Curtain Wall Type A, Square window type, and the outframe type are 49.8m². Implications: As part of the hospital standard module plan for economical and reasonable hospital building planning, a type was proposed in this study in conjunction with the external design. It is hoped that it be a base for standard module research linked together to the Central Treatment department, Outpatient department and underground parking lot.