• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.7
• /
• pp.887-892
• /
• 2007

In this paper, we design, implement and apply network physical layer to 100 BaseFx optical cable interface module based on industrial ethernet protocol EtherCAT that has ensure its open standard ethernet compatibility which haying been provided with real time of control in network of intelligent service robot, can process numerous data to sensor and motor control system. Through various tests, we try to propose suitability as internal network of intelligent service robot.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.270-274
• /
• 1987

In this paper, the design method, design techniques and structure of a language for a SCARA type industrial robot, are presented. The proposed new language is modular and expandable using the C programming language and the 8086 assembly language. It is composed of monitor mode, editor mode, execution mode, I/O mode and teach mode. The developed language is implemented on the robot controller to verify its performance.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.58-63
• /
• 2010

In this paper, design and implementation of multi-modular robots of similar structure to the arthropods for rock path driving. Each module corresponds to an arthropod joint, which has an independent power supply and control equipment including drive and short-range Zigbee wireless communication that were implemented. On various directions and paths each module has the same driving direction and each module is controlled to operate or not by wireless communication. Depending on path condition, each module calculate the speed and torque and depending on the slope of a rough path, the number of active modules can be changed for the efficient driving on a variety of roads conditions. Experimental driving through rough road model, variable multi-module robot is implemented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.190-196
• /
• 2016

This paper proposes a humanoid robot performance system for performing in public places, such as an event, exhibition, or street performance. The system of modular structures can be moved easily, and can be played by a module or a combination of modules. The system developed with open source-based software and hardware is easy to adapt and improve. The robot performance control program for controlling robots, displays, audios, videos, and performance instruments was developed using the open source language, Processing. The performance instruments were developed using the open source hardware, Arduino. The contents of the robot performance were composed of scene-specific image, background audio, computer graphics, and videos. For their control and synchronization, the performance control program communicates with the humanoid robots and the performance instruments. In addition, performance accessories required to represent the performance concepts are produced by 3D modeling and printing. In a public place, the robot performance is performed with the theme of celebrating a Halloween day.

• The Journal of Korea Robotics Society
• /
• v.15 no.2
• /
• pp.131-138
• /
• 2020

This paper proposes a low-cost robotic surgery system composed of a general purpose robotic arm, an interface for daVinci surgical robot tools and a modular haptic controller utilizing smart actuators. The 7 degree of freedom (DOF) haptic controller is suspended in the air using the gravity compensation, and the 3D position and orientation of the controller endpoint is calculated from the joint readings and the forward kinematics of the haptic controller. Then the joint angles for a general purpose robotic arm is calculated using the analytic inverse kinematics so that that the tooltip reaches the target position through a small incision. Finally, the surgical tool wrist joints angles are calculated to make the tooltip correctly face the desired orientation. The suggested system is implemented and validated using the physical UR5e robotic arm.

• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.156-164
• /
• 2011

This paper propose a localization system of indoor mobile robots. The localization system includes camera and artificial landmarks for global positioning, and encoders and gyro sensors for local positioning. The Kalman filter is applied to take into account the stochastic errors of all sensors. Also we develop a dead reckoning system to estimate the global position when the robot moves the blind spots where it cannot see artificial landmarks, The learning engine using modular networks is designed to improve the performance of the dead reckoning system. Experimental results are then presented to verify the usefulness of the proposed localization system.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.444-449
• /
• 2020

I proposed small ambulatory robot actuators using piezoelectric benders. In order to make the motion of the biomimetic robot legs similar to the movements of the cockroaches or similar insects, two pairs of legs in the diagonal direction in the four leg structures are required to make the same movement. And elliptical displacement is realized by taking into account horizontal and vertical displacement of multimode oscillations and driving them by electrical signals with differences step by step, for example of 90° the T-shaped robot actuator showed wide range of speed (From 2 mm/sec. up to 266 mm/sec.) and ability of transportation (up to 10 g with 50 mm/s). Locomotive performance of the robot was competitive to the preceding robots, and moreover, the modular type actuators of a segmented myriapods robot could be added and removed for different tasks or performances.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.169-175
• /
• 2016

There are many researches to develop robots that improve its mobility and task planning to adapt in various uneven environments. In this paper, we propose the design method and task planning of quadruped robot which can have top-bottom docking structure. The proposed quadruped robot is designed to adjust leg length using linear actuators and perform top-bottom docking and undocking using octagonal cone shaped docking module. Also, to stable walking and information gathering in the various environments, a geomagnetic sensor, PSD sensor, LRF sensor and camera. We propose an obstacle avoidance method and the topbottom docking algorithm of the two quadruped robots using linear actuator. The robot can overcome obstacles using adjusting leg length and activate the top-bottom docking function. The top-bottom docking robots of two quadruped robot can walk 4 legged walking and 6 legged walking, and use 4 arms or 2 arms the upper. We verified that the docking robots can carry objects using 4 leg of the upper robot.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.2
• /
• pp.29-35
• /
• 2016

The conventional educational robots, which are commonly industrial robots or toy robots, use text-based programming to teach the students. Therefore, students have difficulty in studying robotics due to the difficulties of text based language. The developed robot in this study have a camera, which have the color tracking function, and it has various sensors and actuators. It supports the open hardware and uses graphic language based programming. The developed educational robot is programmed by Scratch, which uses graphic modular language. We also present a curriculum, which is based upon the developed robot and Scratch. We applied the robot and curriculum to the primary school students. We obtained satisfactory results comparing it with the conventional robot education. Furthermore, the imagination and execution ability of students showed enhancement in learning robotics. Thus, this fact means the validity and effectiveness of the proposed approach.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.59-65
• /
• 2017

In order to realize the operation of the creative modular toy, it is required to record the motion and to read and repeat the motion. At this time, a control potentiometer is used to read the absolute angle of rotation of the toy motion output shaft. However, the unstable part of the sensing area of the potentiometer is present in a certain region, which may lead to instability of the motor control. In this paper, we propose an algorithm to find the absolute angle of one rotation by reading two stable potentiometers on one axis and reading each stable region. We also describe the correction algorithm that is needed to perform multiple rotations. The proposed method is applied to Topobo modular toys to record the operation and perform iterative operation. In addition, multi-turn operation is recorded and operated to suggest the usefulness of the proposed method. In the future, we will expand the functions of recording and playback through various actions.