• 한국의류학회지
• /
• 제32권9호
• /
• pp.1461-1466
• /
• 2008

This study provides effects of mixed activators on enzymatic activation and determines optimum mixture ratio for enzymatic treatment. Wool 80% and polyester 20% blend fabric and papain from carica papaya are used in this experiment. L-cysteine and sodium sulfite are used as activators for papain treatment process. The treatment condition is pH 7.5, $70^{\circ}$, papain concentration 10%(o.w.f), 60 minutes. L-cysteine and sodium sulfite are added in enzyme solution with various concentrations($0{\sim}50mM$). The optimum treatment condition is determined by measuring weight loss, tensile strength, whiteness, water contact angle(WCA), dyeability and surface micrographs. The results are as follow; The optimum mixture ratio of activators is L-cysteine 2mM and sodium sulfite 10mM. Mixed activators assists in improving the activation of papain. WCA of papain treated fabrics is decreased since papain treatment with activator mixture makes wool polyester blend fabrics more hydrophilic. Dyeing property of papain-treated fabrics more improves by the treatment with mixed activators than with single activator. It means that this method can save time and lower cost. After papain treatment in the presence of mixed activator, the surface of fabrics is modified. The surface of wool fiber shows to be descaled and hydrolyzed, and that of polyester fiber shows to be cracked.

• 한국응용과학기술학회지
• /
• 제23권3호
• /
• pp.264-271
• /
• 2006

PU type flame-retardant coatings (TBAO/L-75, TBAOL ; TBAO/N-100, TBAON) were prepared by blending bromine-containing modified polyester (TBAO) which was synthesized in our earlier work. with two kinds of isocyanate curing agents, Desmodur L-75 and Desmodur N-100. Physical properties of the prepared flame-retardant coatings were tested. TBAOL shows better hardness than TBAON, while TBAON shows better viscosity, accelerated weathering resistance, yellowness index and lightness index difference than TBAOL. There were no remarkable differences in fineness of grind, $60^{\circ}$ specular gloss, cross-hatch adhesion, and abrasion resistance of TBAOL and TBAON. There was no discernable difference in flame-retardancy between the two flame-retardant coatings, TBAOL and TBAON. When the content of tribromo acetic acid, which is flame-retarding component, was 30wt% the LOI value was in a range of $29{\sim}30%$, which indicates that the two coatings are good flame-retardant coatings.

• Composites Research
• /
• 제14권2호
• /
• pp.33-42
• /
• 2001

DSC(differential scanning calorimetry)를 이용하여 S2-유리섬유/폴리에스터 프리프레그 복합재료의 경화반응식을 구성하였다. 구성된 경화식과 블리더의 수지 함침에 의한 열전달 조건의 변화를 고려하여, 두꺼운 복합재료의 두께 방향 위치에 따른 온도분포를 계산하였다. 유래섬유 복합재료의 경화중 온도과승을 줄이기 위한 방법으로 냉각 및 재가열 구간을 도입하여 경화 사이클을 개선하였다. 냉각-재가열 구간이 없는 기존의 경화 사이클과 개선된 경화 사이클로 두꺼운 복합재료를 각각 제조하여 short beam shear 시험 및 Barcol 경도시험을 실시하고, 그 결과를 비교하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.267-272
• /
• 2012

Considering the properties of the carbon nano tubes (CNT), their inclusion into the polymer matrix vastly increases the properties of the resultant composite. However, this is not the case due to the poor interfacial adhesion of the CNT and the polymer matrix. The present approach focuses on increasing the interaction between the polymer matrix and the CNT through the chemical modification of the CNT resulting in allyl ester functionalized carbon nanotubes (ACNT) and silane functionalized carbon nano tubes (SCNT) which are capable of reacting with the polymer matrix during the curing reaction. The addition of ACNT/SCNT into unsaturated polyester resin (UPR) resulted in the improvement of the electrical properties of resulted nanocomposites in comparison to the CNT. The surface resistivity, volume resistivity, dielectric strength, dry arc resistivity, and the comparative tracking index of the nanocomposites were significantly improved in comparison to CNT. The chemical modification of CNT was confirmed via spectroscopy.

• 한국응용과학기술학회지
• /
• 제22권2호
• /
• pp.123-135
• /
• 2005

Reaction intermediates PCP/BZA (PBI) and tetramethylene bis(orthophosphate)(TBOP) were synthesized from polycaprolactone (PCP) and benzoic acid (BZA) and from pyrophosphoric acid and 1,4-butanediol, respectively. Benzoic acid modified polyesters containing phosphorus (APTB-S, -10, -15) were synthesized by polycondensation of the prepared PBI (containing 5, 10, 15wt% of benzoic acid), TBOP, adipic acid, and 1,4-butanediol. Network structured PU flame-retardant coatings (APHD) were prepared by curing the synthesized benzoic acid modified polyesters containing phosphorus (APT B - 5 , -10, -15) with hexamethylene diisocyanate (HDI)-timer. From the TGA analysis of APTBs, it was found that the afterglow decreased with the amount of BZA content at the high temperatures. With the introduction of BZA, the film viscosity and film hardness of APHD decreased. With the introduction of caprolactone group, the flexibility, impact resistance, accelerated weathering resistance of APTBs increased. Flame retardancy of the coatings was tested. In a vertical burning method, APHD shows 210$^{\sim}$313 seconds, which indicates that the coatings are good flame-retardant coatings. Moreover, the amount of afterglow and flame retardancy of the coatings are decreased with increasing BZA content.

• 한국염색가공학회지
• /
• 제17권3호
• /
• pp.1-7
• /
• 2005

Cationic dyeable polyester(CDP) was produced through melt blending of cationic chips having $2mol\%$ of sodium salt of dimethyl ester of 5-sulfoisophthalic acid(DMS salt) and normal polyester chips in different proportions to obtain yarns having varying amount of comonomer in the fiber. The modified polyesters showed increased moisture regain, decreased viscosity, lower softening point and improved antistatic characteristics, according to the amount of modifier. In dyeing at $100^{\circ}C$ the dyeing rate of cationic dyes with CDP fiber increased slowly than that of disperse dyes. In dyeing at $120^{\circ}C$ cationic dyes reached to equilibrium at 30min and disperse dyes at 10min. Cationic dyes in dyeing of CDP fabric have a better wash fastness compared with disperse dyes, also rubbing fastness of cationic dyes is better than that of disperse dyes. The light fastness of CDP fabric for cationic and disperse dyes is not good. The fastness of 75d/36f CDP fabric is higher than 75d/72f fabric. Solvent wicking fastness of CDP with cationic dyes is better than that of disperse dyes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.865-867
• /
• 2009

In this paper, we describe the fabrication of nano-scale ink particles with narrow size distribution to offer high optical density in electrophoretic display applications. Charged white ($TiO_2$ and polyester) and black (carbon black and polyester) nano size ink particles in size range of 200 ~ 700nm were made successively using modified non-aqueous base emulsion process. The EPD showed white reflectance of 58% and saturation voltage of ${\pm}10V$.

• 접착 및 계면
• /
• 제12권1호
• /
• pp.34-42
• /
• 2011

자동차용 도장시스템으로 새롭게 대두되고 있는 roll coating process는 비친환경적이면서도 생산성이 떨어지는 기존의 습식도장공정을 완전 대체할 수 있는 기술로 알려져 있다. Pre-painted 강판 시스템에서 도막 유연성 및 강도 등의 구현을 위하여 경화거동뿐만 아니라 내식성 및 성형가공성, 유변학적 거동 등의 평가가 매우 중요하다. 본 연구에서는 pre-painted system에 적용하기 위하여 polyester 수지를 수산화기 및 분자량 변성을 통하여 합성한 후, 경화거동 및 딥드로잉, 인장력, 유변특성 등을 평가하였다. 40 (mg KOH-/mol)정도의 수산화기를 갖는 N-0375-40 system이 유연성 및 도막강도, 경화거동 등의 가장 우수한 물성을 나타내었다.

• 공업화학
• /
• 제10권1호
• /
• pp.93-97
• /
• 1999

불포화폴리에스테르 수지의 표면에너지를 저하시키기 위하여 실록산-에스터 공중합체를 소량 첨가하였다. 실록산-에스터 공중합체는 diol로써 ethylene glycol(EG)과 hydroxy terminated polydimethylsiolxane(PDMS)을, diacid로써 maleic anhydride (MA)와 phthalic anhydride (PA)를 축중합반응 시켜 합성하였다. 경화된 블렌드의 표면성질은 동적접촉각(dynamic contact angles)측정, 점착테이프의 peel 강도측정 및 X-ray photoelectron spectroscopy (ESCA)등을 통하여 분석하였다. 블렌드에서 공중합체의 첨가량이 증가하고, 공중합체내의 PDMS 함량이 증가함에 따라 물에 대한 advancing 접촉각 및 receding 접촉각이 증가하였으며, 점착테이프의 peel 강도는 급격히 감소하였다. ESCA 분석결과 실록산 세그멘트가 공기쪽 표면층에 주로 존재하고 있음을 알 수 있었다.

• 공업화학
• /
• 제8권6호
• /
• pp.907-913
• /
• 1997

3,5,5-trimethylhexanoic acid(THA)와 트리메틸올프로판을 에스테르화시켜 중간생성물을 얻은 후, 중간생성물 속의 알키드 폴리올 성분인 THA의 함량을 10, 20, 30wt.%로 변화시키면서 1,4-부탄디올, 트리메틸올프로판 및 아디프산과 축중합하여 알키드 변성폴리에스테르를 각각 합성하였다. 위에서 합성된 알키드 변성폴리에스테르에 폴리이소시아네트쪽 성분인 Desmodur L-75와 블렌드하여 2성분계 폴리우레탄 도료를 제조하였다. 제조된 도료의 도막처리후의 제반 물성시험을 해 본 결과 3,5,5-trimethylhexanoic acid의 함량증가에 따라 $8^-$점의 높은 연화도, 2~3시간의 짧은 건조시간 및 18~23시간의 긴 가사시간을 나타내어 알키드기의 장점이 일부 나타남을 확인하였다.