• Bulletin of the Korean Chemical Society
• /
• 제22권8호
• /
• pp.816-820
• /
• 2001

A new copper hexacyanoferrate modified electrode was constructed by mechanical immobilization. The modified electrode was characterised by cyclic voltammetric experiments. Electrocatalytic oxidation of glutathione was effective at the modified electrode at a significantly reduced overpotential and at broader pH range. The modified electrode shows a stable and linear response in the concentration range of 9 ${\times}$10-5 to 9.9 ${\times}$10-4M with a correlation coefficient of 0.9995. The modified electrode exhibits excellent stability, reproducibility and rapid response and can be used in flow injection analysis for the determination of glutathione.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1323-1325
• /
• 2008

The acetylene black (AB) was dispersed into water in the presence of dihexadecyl hydrogen phosphate (DHP) via ultrasonication, resulting in a stable and well-distributed AB/DHP suspension. After evaporation of water, an AB/DHP composite film-modified electrode was prepared. The electrochemical responses of $K_3$[Fe$(CN)_6$] at the unmodified electrode, DHP film-modified electrode and AB/DHP film-modified electrode were investigated. It is found that the AB/DHP film-modified electrode possesses larger surface area and electron transfer rate constant. Furthermore, the electrochemical behaviors of 1-naphthylacetic acid (NAA) were examined. At the AB/DHP film-modified electrode, the oxidation peak current of NAA remarkably increases. Based on this, a sensitive and convenient electrochemical method was proposed for the determination of NAA. The linear range is in the range from $4.0 {\times} 10^{-8}\;to\;5.0 {\times} 10^{-6}$ mol $L^{-1}$, and the detection limit is $1.0 {\times} 10^{-8}$ mol $L^{-1}$. Finally, this new sensing method was employed to determine NAA in several soil samples.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.177-184
• /
• 2019

An electrochemical detection method for capsaicin has been developed using ionic liquid (IL) doped graphene-titania-Nafion composite-modified electrode. The combination of IL (1-hexyl-3-methylimidazolium with hexafluorophosphate counter ion) in the composite-modified electrode resulted in a significantly increased electrochemical response for capsaicin compared to that obtained at the corresponding electrode without IL. The increased electrochemical signal could be ascribed to the decreased electron transfer resistance through the composite film and also to the effective accumulation of capsaicin on the electrode surface due to ${\pi}-{\pi}$ interaction of the imidazole groups of IL with the aromatic rings of capsaicin. The present IL composite-modified electrode can detect capsaicin with a concentration range from $3.0{\times}10^{-8}M$ to $1.0{\times}10^{-5}M$ with a detection limit of $3.17{\times}10^{-9}M$ (S/N = 3). The present sensor showed good reproducibility (RSD = 3.2%).

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.433-441
• /
• 2007

본 논문에서는 질산염 이온의 환원을 위한 Sn의 흡착 또는 전착을 가지는 Sn-modified Pt 전극의 안정성이 평가되었다. 전극의 불안정성의 원인을 찾기 위하여 전극이 접하는 용액과 전극에 가해지는 전압에 따른 Pt 표면에서 Sn의 전기화학적 및 재료적 변화가 조사되었다. 제작된 Sn-modified Pt 전극 표면의 Sn은 hydroxide 형태로 존재하여 물, 특히 산 용액에서 방치하는 것에 의해서도 용해되어 쉽게 전극의 활성이 감소되었으며, 질산염 이온의 환원 시 전극에 $Sn(OH)_2$와 Sn의 산화-환원 평형 전압 보다 음의 전압이 가해질 때 전극 표면의 Sn hydroxide는 Sn으로 환원되어 Pt 전극 내부로 고체 확산되었고, 이는 Sn-modified Pt 전극의 활성을 감소시켰다. Sn의 고체 확산은 전극에 가해주는 전압에 비례하였다. Sn을 Pt에 코팅시키기 위하여 UPD 조건에서 흡착하는 것 보다 많은 Sn을 Pt 표면에 붙일 수 있는 Sn을 Pt에 전해 전착시키는 것이 질산염 이온의 환원하는 동안 전극의 건전성을 유지하는데 유리하였다.

• 상하수도학회지
• /
• 제27권4호
• /
• pp.503-509
• /
• 2013

Electrochemical redox capacity of a microbial fuel cell (MFC) electrode is an important factor in the power density. This study was conducted to investigate the redox capacity of surface modified anode and cathode electrodes by measuring their conductivities. An anode electrode was modified with nitric acid and a cathode electrode was modified with heat treatment. The anode electrode modified with 20 % of the nitric acid concentration showed the highest conductivity of $6.2{\mu}S/cm/g$ and the maximum power density of $306.0mW/m^2$ when used in a MFC. The cathode electrode modified at $472^{\circ}C$ for 18 min showed the highest conductivity of $5.2{\mu}S/cm/g$ and the maximum power density of $276.20mW/m^2$ when used in a MFC. On the other hand, an MFC using both the electrodes showed the highest maximum power density of $408.2mW/m^2$. Meanwhile, a control MFC without modified electrodes generated very small voltage (0.014 mV), so the power density could not be measured.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1543-1546
• /
• 2008

Modified pulse waveforms were applied to an AC plasma display panel with an auxiliary electrode in order to improve the operation voltage margin. Reciprocal sustain pulse waveforms and modified auxiliary pulse waveforms were applied to the sustain and auxiliary electrode, respectively. During the sustain period, the influence of the address electrode on the luminous efficacy of long-coplanar gap discharges was mitigated by application of reciprocal sustain pulse waveforms. Modified auxiliary pulse waveforms maintained the high efficacy obtained from the AC PDP with an auxiliary electrode. The proposed reciprocal sustain and modified auxiliary pulses waveforms can induce stable discharges in long-coplanar gap discharges and can control wall charges with a wider auxiliary pulse voltage margin, thereby enhancing the luminous efficacy of the AC PDP with an auxiliary electrode.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2943-2948
• /
• 2009

Copper-dimethylglyoxime complex (CuDMG) modified Copper electrode (Cu/CuDMG) showed a catalytic activity towards cyclohexanol oxidation in NaOH solution. The modified electrode prepared by the dimethylglyoxime anodic deposition on Cu electrode in the solution contained 0.20 M $NH_4Cl\;+\;NH_4OH\;(pH\;9.50)\;and\;1\;{\times}\;10^{-4}$ M dimethylglyoxime. The modified electrode conditioned by potential recycling in a potential range of -900${\sim}$900 mV vs. Ag/AgCl by cyclic voltammetry in alkaline medium (1 M NaOH). The results show that the CuDMG film on the electrode behaves as an efficient catalyst for the electro-oxidation of cyclohexanol in alkaline medium via Cu (III) species formed on the electrode.

• Korean Chemical Engineering Research
• /
• 제45권2호
• /
• pp.124-132
• /
• 2007

본 논문에서는 Ti 모재에 대한 Pt 도금 특성 연구를 통하여 안정한 platinized Ti 전극의 제조 방법이 제시되었으며, Sn이 흡착된 platinized Ti 전극의 질산염 이온에 대한 전기화학적 특성이 연구되었다. 에칭된 Ti 모재 표면에 전착된 Pt 도금 층 내에 적당하게 공간적 틈을 갖도록 도금하는 것은 도금 후 표면에 잔존하는 도금 용액 오염원을 제거하는데 효과적이며, 또 용액과 접하게 되는 전극의 실제 표면적을 최대화할 수 있었다. 제작된 platinized Ti 전극을 끓이는 과정과 전해 세정 과정을 통해 안정적이며 재현성 있게 만드는 것은 Sn-modified platinized Ti 전극에서 표면의 Sn 덮힘율을 정량화하는데 있어 매우 중요하였다. 전해 세정 과정은 전극 표면에 형성된 솜털과 같은 미세한 돌기들이 없어지면서 전극 표면을 안정화된 구조로 변화시켰다. 본 연구의 경우 질산염 이온의 환원을 목적으로 하는 Sn-modified platinized Ti 전극은 약 30분 도금 시간을 통해 제조한 경우가 가장 좋았다.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.415-419
• /
• 2012

Electrochemical characteristics of nitrite ion were investigated at a poly(methylene blue)-modified glassy carbon electrode by cyclic voltammetry and differential pulse voltammetry. The poly(methylene blue)-modified glassy carbon electrode exhibited enhanced anodic signals for nitrite. The effects of key parameters on the detection of nitrite were evaluated at the modified electrode, such as pH, accumulation time, and scan rate. Under optimum condition, the chemically modified electrode can detect nitrite in the concentration range $2.0{\times}10^{-6}$ to $5.0{\times}10^{-4}$ M with the detection limit of $2.0{\times}10^{-6}$ M and a correlation coefficient of 0.999. The detection of nitrite using the chemically modified electrode was not affected by common ions such as $Na^+$, $K^+$, $Ca^{2+}$, $Cl^-$, $HPO_4^{2-}$ and $H_2PO_4^- $. The modified electrode showed good stability and reproducibility. The practical application of the present method was successfully applied to the determination of nitrite ion in cabbage samples.

• 전기화학회지
• /
• 제9권4호
• /
• pp.158-169
• /
• 2006

The present article is concerned with the overview of the chemically/surface modified cubic spinel $LiMn_2O_4$ as a cathode electrode far lithium ion secondary batteries. Firstly, this article presented a comprehensive survey of the cubic spinel structure and its correlated electrochemical behaviour of $LiMn_2O_4$. Subsequently, the various kinds of the chemically/surface modified $LiMn_2O_4$ and their electrochemical characteristics were discussed in detail. Finally, this article reviewed our recent research works published on the mechanism of lithium transport through the chemically/surface modified $Li_{1-\delta}Mn_2O_4$ electrode from the kinetic view point by the analyses of the experimental potentiostatic current transients and ac-impedance spectra.