• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.235-246
• /
• 1998

This study was performed to find the effect of parameters of numerical analysis model. To find the parameters of numerical analysis model, triaxial test and consolidation test were conducted and the results were compared and analyzed with various methods. Preloaded ground was analyzed with Hyperbolic and Modified Cam-Clay models. Hyperbolic model analysis result was good agreement with measured lateral displacement, and Modified Cam-Clay model agreed more than Hyperbolic model with settlement. When the parameters of models were changed, change of settlement on center of embankment and of maximum lateral displacement on distance 5m from end of embankment were compared. On Hyperbolic model the parameter K has large influence on settlement and lateral displacement. On Modified Cam-Clay model the parameters ${\Gamma}$ and M have large influence on settlement and lateral displacement, respectively.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.2
• /
• pp.1-12
• /
• 2024

In order to integrate two consolidation theories of Terzaghi's consolidation theory and Mesri's secondary compression theory and to identify a model suitable for analyzing stress-strain behavior over time, numerical analysis on consolidation tests were conducted using a modified cam-clay model and a soft soil creep model and the following conclusions were obtained. The results of numerical analysis applying the theory that a linear proportional relationship is established between the void ratio at logarithmic scale and the permeability coefficient at logarithmic scale is better agreement with the result of oedometer test than the results of applying constant hydraulic conductivity. The modified cam-clay model is a model that does not include secondary compression, but the slope of the normal consolidation line corresponding to the compression index of the standard consolidation test includes secondary compression, so the actual settlement curve over time is lower than the predicted value through numerical analysis. It always gets smaller. Other previous studies that applied Terzaghi's consolidation theory to consolidation test analysis showed the same results and were cross-confirmed. The soft soil creep model, which includes secondary compression in the theory, showed good agreement in all sections including secondary compression in the consolidation test results. It was judged appropriate to use a soft soil creep model when performing numerical analysis of soft clay ground.

• Journal of the Korea Institute of Building Construction
• /
• v.1 no.1
• /
• pp.151-159
• /
• 2001

This study was performed to investigate the effect of time-dependent creep on the deformation. In the analysis, modified Cam-Clay model was adopted to describe the elastic-plastic behavior of clayey soil. In order to consider effect of creep, the secondary coefficient of consolidation $\alpha$ was supplemented to modified Cam-Clay model. To examine the reliability of the program which is developed in this study, the estimated values by this program were compared with the experimental results. The results of the analysis were in good agreement with the observed values in the field.

• Geomechanics and Engineering
• /
• v.20 no.2
• /
• pp.147-154
• /
• 2020

A novel approach for predicting lateral displacement caused by pile installation in anisotropic clay is presented, on the basis of the cylindrical and spherical cavities expansion theory. The K₀-based modified Cam-clay (K₀-MCC) model is adopted for the K₀-consolidated clay and the process of pile installation is taken as the cavity expansion problem in undrained condition. The radial displacement of plastic region is obtained by combining the cavity wall boundary and the elastic-plastic (EP) boundary conditions. The predicted equations of lateral displacement during single pile and multi-pile installation are proposed, and the hydraulic fracture problem in the vicinity of the pile tip is investigated. The comparison between the lateral displacement obtained from the presented approach and the measured data from Chai et al. (2005) is carried out and shows a good agreement. It is suggested that the presented approach is a useful tool for the design of soft subsoil improvement resulting from the pile installation.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.79-89
• /
• 2004

An elastic-plastic-viscous constitutive model was proposed based on a simple formulation scheme. The anisotropic modified Cam-Clay model was extended for the general stress space for the plastic simulation. The generalized viscous theory was simplified and used for the viscous constitutive part. A damage law was incoporated into the proposed constitutive model. The mathematical formulation and development of the model were performed from the point of view that fewer parameters be better employed. The creep behaviors with or without creep rupture were predicted using the developed model for cohesive soils. The model predictions were favorably compared with the experimental results including the undrained creep rupture, which is an important observed phenomenon for cohesive soils. Despite the simplicity of the constitutive model, it performs well as long as the time to failure ratio of the creep rupture tests is within the same order of magnitude.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.6
• /
• pp.61-70
• /
• 2008

In this study, undrained triaxial (CU) tests were performed on low-plastic silt of Nakdong River in order to investigate the undrained shear behavior of low-plastic silt. In experimental results, the deviator stress showed the hardening behavior after reaching its yield stress like the tendency of common sand, and the pore water pressure was gradually decreased to critical state after the maximum value. In the effective stress paths, regardless of consolidation stress or overconsolidation ratios, both a critical state line (CSL) and a phase transformation line (PTL) exist in the effective stress path that is similar to the case of sand. The behavior of low-plastic silt was predicted by the Modified Cam-Clay (MCC) model, the Jordan and the Elman-jordan model that is artificial neural network model. According to predicted results, the overall undrained shear behavior of low-plastic silt could not be predicted with the MCC model, but the Jordan and Elman-Jordan model showed well-matched experiment results.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.6
• /
• pp.61-73
• /
• 2004

The coefficient of permeability of natural clay shows a nonlinear property which is related to various stress level of soils, and this nonlinear property has effect on the period of consolidation and the property of deformation in clay soils under loading. Thus, in this paper the numerical analysis was conducted by FEM-using coupled theory which incorporated Biot's consolidation theory into modified Cam-clay model- to consider the effects of nonlinear permeability on the behavior of clay soils under loading. The result of this paper showed that nonlinear permeability had different effects on the deformation and excess pore water pressure in clay soils according to the change of ratios of coefficients of permeability which was presented a degree of nonlinear property, and average coefficients of permeability of soils. Therefore, it was concluded that nonlinear permeability should be considered according to both the change of ratios of coefficients of permeability and average coefficients of permeability to conduct more simultaneous analyses to field conditions.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.109-118
• /
• 2003

This paper is results of numerical works of investigating effects of horizontal drain arrangements on vacuum consolidation. Extensive numerical analyses were carried out to find the appropriate arrangements of horizontal drain of vacuum consolidation. Commercially available program of CRISP, well known to be good to modelling the behavior of clay material, was used Cam-clay model, based on the Critical State of Soil Mechanics(CSSM), was used to simulate the geotechnical engineering behavior of clay. Model test results carried out previously in the laboratory were compared with numerically estimated results and it was found that results about consolidational settlement with times were in good agreements. Based on this confirmation, parametric numerical study was performed to investigate effects of horizontal drain arrangements on vacuum consolidation with changing the vertical and horizontal spacings between drains for the given soil properties and vacuum. The effect of distance of drain located in top layer from the surface of the ground on the settlement due to vacuum was also investigated. As a results of numerical analyses, appropriate arrangements of horizontal drain to maximize the consolidation settlement due to vacuum were found. The mechanism of vacuum consolidation about the vacuum pressures being transferred to the effective stresses around drains was also evaluated.

• Geotechnical Engineering
• /
• v.3 no.4
• /
• pp.7-20
• /
• 1987

This study was performed to investigate the effect of time-dependent creep on the deformation analysis of multi-dimensional consolidation using the finite element method for young Sedimentary clay. It was assumed that the creep in the clay had occured during consolidation. In the analysis, the Modified cam-clay theory originated from the critical state theory was used as the constitutive equation, in which a term equivalent to the creep was supplemnted. The results of the analysis were in good agreement with the observed values in the field.

• Structural Engineering and Mechanics
• /
• v.33 no.1
• /
• pp.67-77
• /
• 2009

The soil response calculation is described, by which, threw the fictive path of stress, the stress-deformation diagrams are determined, considering the nonlinear soil behavior. The calculation are lead incrementally, by which is shown that in the presented soil model (modified Cam Clay), considering the influence of overconsolidated soil pressure OCR, the number of calculation steps may, but not necessarily, have a sufficient influence on the value of failure load and definite soil deformation. The simplicity and the practicalness of the procedure, the enables modeling the complex relations in soil.