• The Research Journal of the Costume Culture
• /
• v.22 no.1
• /
• pp.16-27
• /
• 2014

This study investigated the characteristics of and changes in hemp textile production practices at Gurye in Jeollanam-do in modern times. To do this, in this study, both a literature review and fieldwork research were utilized as research methods. The literature review focused on Gurye's hemp data, and the fieldwork research involved two separate trials. Male and Female residents of Gurye who had experience in the area of hemp production from the 1920s to the 1980s participated in this study. The results were as follows. First, regarding hemp fiber cultivation in Gurye, hemp cultivation continued to the 1970s and there were no changes in hemp cultivation practices during the Japanese colonial-era. Second, there have been very important changes in hemp kilns over time. In the 1950s, there were both single-body kilns and separate-body kilns in Gurye. Later, specifically in the 1950s, a new type of kiln using an iron pot appeared, and the most modern kilns were concrete structures. Third, in Gurye, women cooperatively removed hemp husks immediately after stemming, subsequently bleaching the hemp by soaking it in lye or caustic soda. Over time, there have been changes in ash types and in soaking periods. Fourth, loom types changed from the traditional Korean back-strap loom to the treadle loom in the 1930s- to 1940s. Fifth, since the 1970s, the hemp textile output levels of Gurye have been reduced due to the westernization of clothing styles, the inflow of Chinese hemp fiber and government regulations pertaining to hemp cultivation.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.22-24
• /
• 1974

1. Object and importance of the research. The exports of plywood are increasing annually and it has ranked first in the world market because of the high quality product developed and manufactured using modern techniques. However, it is known that the exports of the other wood products, except plywood, is inactive because of their low quality. Accordingly, to increase the exports of various wood products investigations were carried out on kiln drying techniques to improve the quality of the wood. 2. The details and scope of the research Wet wood should be kiln dried before use to prevent various drying defects such as distortion, shrinkage etc, which would develop after processing, and also wet wood is not suitable for cutting, gluing and finishing. Therefore, the kiln drying properties of lumber from such species as Persimmon, Oak, Ramin and Meranti which are used in large quantity for manufacturing exporting wood products have been studied. Also the real state of kiln drying industry in Korea was investigated. 3. Results and proposal for practical use of the research 3. 1 Results of the research 3.1.1 The end checks and the time for drying from intial moisture content of about 40 percent to 5 percent moisture content in ovendry were investigated as Table 1. 3.1.2 The kiln dried results, for 30mm stock, which are presented by using kiln schedule Table 2 are as Table 3. 3.1.3 The kiln schedule for Persimmon which has a normal drying properties is given in Table 4. However, the persimmon which has easy checking properties should be air dried under a relative humidity of above 85% until reaching about 25 percent moisture content. 3.1.4 The kiln schedules for ramin, meranti and oak are given respectively as follows. Ramin kiln schedule ............ Table 5 and Table 6 Meranti kiln schedule ............ Table 7 Oak kiln schedule ............ Table 8 3.2 Proposal for practical use of the research Firms using the above species should be informed the results of the research so they can be used to preventing drying defects and shortening drying time.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.277-289
• /
• 2019

Herein, a case study discussing the effect of carbonaceous aerosol pollution, which is emitted during the charcoal kiln manufacturing processes or carbonization processes, on the atmospheric environment is presented . In South Korea, in situ analysis of different charcoal production plants specialized in the production of charcoal sauna indicate that the emitted organic carbon (OC) and elemental carbon (EC) aerosols are significantly influenced by the nature of the biomass and technological processes, i.e., treatment or emissions abatement systems for the exhaust effluent gases. In detail, total carbon (TC), which is calculated as the sum of OC and EC emission factors, varied widely from a charcoal production site to another ranging from 21.8 to 35.8 gTC/kg-oak, where the mean value for the considered production sites was approximately 28 gTC/kg-oak (N = 7 and sum = 196.4). Results indicate that the emission factors from a modern charcoal production process in South Korea are quantitatively lower in comparison with the traditional kiln. This study aims to propose advanced wood processes for the production of charcoal from the viewpoint of environmental protection policy and green engineering.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.261-277
• /
• 2013

This study aims to research the relationship between whitewares and their rare materials from the site of Yanggu and Bunwon through the componential characteristic of the excavated whitewares from the 1st and the 2nd kilns of Chiljeon-ri in Bangsan-myeon, Yanggu-gun. As a result, the sherds were devided according to the chemical compositions of the body and the glaze via their respective production era. However, it considered that the whitewares from Chiljeon-ri had been manufactured with geochemically similar materials and the production process, such as refining and combining materials, had been different. It assumed that the firing temperatures of the whitewares from Chiljeon-ri were around $1,100-1,200^{\circ}C$ and substantially lower than for general whitewares. In the componential analysis, there were disparate properties in the cobalt pigment, which contained trace elements and rare earth elements. A review of the literature revealed a correlation between the whitewares from the late Chosun kiln site in Bunwon-ri and the raw materials from Yanggu-gun, but this was there were various techniques for refining and combining materials in Bunwon-ri.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.481-492
• /
• 2018

We conducted TL/OSL dating for the earthenware kilns in the Bongsan-ri archaeological site, Osong, which was occupied from the late nineteenth to the late twentieth century. With the SAR-TL/OSL method, paleodose was determined from the equivalent dose during the burial period($ED_{burial}$), the background dose($ED_{BG}$), the fading correction factor(f), and the overestimation correction factor(C). The annual dose rates and their provenance were evaluated from the measurement of natural radionuclides $^{238}U$, $^{232}Th$, and $^{40}K$. Because the comprehensive absolute age was provided by combining the resulting TL/OSL and radiocarbon data, we concluded that, for the absolute chronology of a modern archaeological site, TL/OSL dating and radiocarbon dating must be carried out together and summed. The construction and occupation of earthenware kilns in the Bongsan-ri site had changed from stage I (No.5, 6 kilns), to stage II (No.1, 2, 3 kilns), to stage III (No.4) in chronological order. When Bayesian statistics were applied, we found that the absolute ages of occupation for stages I, II, and III correspond to AD $1910{\pm}23$, AD $1970{\pm}10$, and AD $1987{\pm}4$. These results were in good agreement with the archaeological context or chronology.