• Structural Engineering and Mechanics
• /
• v.29 no.3
• /
• pp.289-300
• /
• 2008

The use of metric trial functions to represent the real stress field in what is called the unsymmetric finite element formulation is an effective way to improve predictions from distorted finite elements. This approach works surprisingly well because the use of parametric functions for the test functions satisfies the continuity conditions while the use of metric (Cartesian) shape functions for the trial functions attempts to ensure that the stress representation during finite element computation can retrieve in a best-fit manner, the actual variation of stress in the metric space. However, the issue of how to handle situations where there is locking along with mesh distortion has never been addressed. In this paper, we show that the use of a consistent definition of the constrained strain field in the metric space can ensure a lock-free solution even when there is mesh distortion. The three-noded Timoshenko beam element is used to illustrate the principles. Some significant conclusions are drawn regarding the optimal strategy for finite element modelling where distortion effects and field-consistency requirements have to be reconciled simultaneously.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.730-735
• /
• 1992

In this study, heavy loads driving servo control systems, which are composed of electro-hydraulic servo-valve, hydraulic motor/cylinder, gear box and link mechanism, are investigated for implemention. To predict the performances of the systems, modelling and simulation with some nonlinearities are carried out. Simulation results are compared with experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.194-199
• /
• 1992

In this paper, each section of an Electrolytic Tinning Line is mathematically modelled with the coupling effect accounted for. Based on the modelling, PI and feedforward controllers are designed for speed control or tension control of each section of the process line. It is shown through simulatios that the tension of the stip is controlled precisely along the entire line and the contituety of the process is insured when using the efficient control of loop towers.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.202-209
• /
• 1998

This paper presents a modelling of railway facilities and signalling system based on object-oriented software development technique to simulate multi-train movements on the complex railway network. Block and interlocking functions of signalling system is modelled using Node-Link model of railway network and signal control logic, which can be used to set the train routes and control the train movement. A brief explanation of class design about these model is provided.

• Communications for Statistical Applications and Methods
• /
• v.14 no.3
• /
• pp.517-530
• /
• 2007

We studied a modelling process for unimodal and multimodal circular data by using von Mises and its mixture distribution. In particular we suggested EM algorithm to find ML estimates of the mixture model. Simulation results showed the suggested methods are very accurate. Applications to two kinds of real data sets are also included.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.167-172
• /
• 1992

In this study, heavy loads driving control systems, which are composed of electro-hydraulic servo-valve, hydraulic motor/cylinder and gear box, are investigated for implemention. To predict the performances of the systems, modelling and simulation with some nonlinearities are carried out. Simulation results are compared with experimental results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.58-67
• /
• 2003

An automotive engine cooling system is closely related with overall engine performances, such as reduction of fuel consumption, decrease of air pollution, and increase of engine life. Because of complex reaction between each component, the direct experiment, using a vehicle, takes high cost, long time, and slow response to the system change. Therefore, a computer simulation would provide the designer with an inexpensive and effective tool for design, development, and optimization of the engine cooling system over a wide range of operating conditions. In this work, it has been predicted the thermal performance of the engine cooling system in cases of stationary mode, constant speed mode, and city-drive mode by mathematical modelling of each component and numerical analysis. The components are engine, radiator, heater, thermostat, water pump, and cooling fans. Since the engine model is the most important, that is divided into eight sub-sections. The volume mean temperature of eight sub-sections are simultaneously calculated at a time. For detail calculation, the radiator and heater are also divided into many sub-sections like control volumes in finite difference method. Each sub-section is assumed to consist of three parts, coolant, tube with fin, and air. Hence it has been developed the simulation program that can be used in case of design and system configuration changes. The overall performance results obtained by the program were desirable and the time-traced tendencies of the results agreed fairly well with those of actual situations.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.328-333
• /
• 2007

The purpose of this study is modelling of system air-conditioner for TRNSYS. System air-conditioner is operated by a variable capacity compressor and accommodated by multiple evaporators. By reason of these feature, realizing performance of system air-conditioner for TRNSYS was incomplete. In this study performance data of system air-conditioner and control logics are used to make system air-conditioner module for TRNSYS. Performance data contains total capacity, power input and capacity index of system air-conditioner. The simulation was carried out in a mode of temperature level control using TRNSYS 16. The simulation shows that the system air-conditioner model operate variable capacity and can compute capacity index and power input of system.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.581-584
• /
• 1998

This paper presents a scheme for fuzzy modelling and control of continuous-time nonlinear systems using a genetic algorithm. A fuzzy model is characterized by fuzzy "if-then" rules whose consequence part has a linear dynamic equation as subsystem of the system. The parameters of the fuzzy model are adjusted by a genetic algorithm. Then a tracking controller which guarantees stability of the overall system is designed. The simulation result demonstrates the effectiveness of the proposed method.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.149-158
• /
• 2000

After measuring actual stress by two measurements(Dynamic Strain Meter, Histogram Recorder) on truss rail road bridge, we could perform time history analysis by 3-D beam element method on modelling bridge. And then, after analyzing bridge structure in static by 3-D modelling, we estimated degree of fatigue damage in main member, secondary member of tie zone, cutting area of base metal cross section for confirming the result. In case that the simulated stress is carried out on modeling bridge, most of those simulation mainly is performed by main members. But in real bridge fatigue damage problems generally caused by junctions, connections, joints in which especially local stress is activated. Therefore, in this paper actual stress on critical area was estimated through the analysis result by simulation. With this study, we can estimate the degree of fatigue damage from a safety point of view and comparative accuracy.