• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.47-54
• /
• 2018

The purpose of this study is to verify the long - range measurement performance for practical field application of VDMS. The reliability of the VDMS was verified by comparison with the existing monitoring sensor, GPS, Accelerometer and LDS. It showed the ability to accurately measure the dynamic displacement by tracking a motion of free vibration of target. And using the PSD function of measured data, the results in the frequency domain were also analyzed. We judged that VDMS is able to identify the higher system mode and has sufficient reliability. Based on the reliability verification, we conducted tests for long-distance applicability for actual application of VDMS. The distance from the stationary target model structure was increased by 50m interval, and the maximum distance was set to 400m. From the distance of 150m, the image obtained by the commercial camcorder has an error in the analysis, so the measured displacement comparison was performed between the LDS and the refractor telescope measurement results. In the measurement results of the displacement area of VDMS, the data validity was deteriorated due to the data shift by the external force and the quality degradation of the enlarged image. However, even under the condition that the effectiveness of the displacement measurement data of VDMS is low, the first mode characteristic included in the free vibration of the object is clearly measured. If the influence from the external environment is controlled and stable data is collected, It is judged that reliability of long-distance VDMS can be secured.

• Journal of Ship and Ocean Technology
• /
• 제4권1호
• /
• pp.11-20
• /
• 2000

Reynolds-averaged Navier-Stokes equations are numerically solved using a secondorder finite difference method for the analysis of turbulent flows around single and tandem hydrofoils advancing under the free surface. The location of the free surface, not known a priori, is computed from the kinematic free surface condition and the computational grid is conformed at each iteration to the free surface deformation. The eddy viscosity model of Baldwin-Lomax is employed for the turbulence closure. The method is validated through the comparision of the numerical results with the experimental data for a single hydrofoil of a Joukowski foil section. A computational study is also carried out to investigate the effect of the submergence depth and the Froude number on the lift and the drag of the hydrofoil. For tandem hydrofoils, computations are performed for several separation distances between the forward and aft foils to see the interference effect. The result shows clearly how the lift and drag change with the separation distance.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.63-76
• /
• 2009

A study on the interference effects of overlapping tandem rotors in forward flight is conducted using the time-marching free-wake panel method which adopts field velocity boundary integral formulation. The conventional boundary integral formulation is numerically unstable for the cases when the blade and the wake are in close proximity to each other. In order to avoid this problem, this study applies the field velocity method and modifies the boundary integration formulation. The improved method is used for the parametric study on the advance ratio and the distance between the rotors. These are the parameters that most affect the interference of the tandem rotor in forward flight. Comparison of the aerodynamic performance shows that the horizontal distance between the rotors negligibly influences the overlap-induced power factor for high advance ratio. In addition, it shows that the overlap-induced power factor is inversely proportional to the squared vertical distance between the rotors, and that the overlap-induced power factor increases to a certain extent and decrease back as the advance ratio increases.

• 한국측량학회지
• /
• 제29권3호
• /
• pp.249-255
• /
• 2011

고중복도 비디오카메라 영상을 이용하여 GPS/INS 및 지상기준점 자료 없이 제작되는 자유 입체 모자이크 영상은 기준 프레임 영상의 3차원 모델좌표계로 표현되는 상호표정요소를 이용하여 제작될 수 있다. 이와같이 제작된 자유 입체 모자이크 영상으로부터 결정되는 3차원 좌표는 3차원 모델좌표계로 나타내게 된다. 따라서 자유 입체 모자이크 영상을 이용하여 절대좌표를 결정하기 위해서는 모델좌표계를 절대좌표계로 변환하기 위한 방법이 필요하다. 일반적으로 서로 다른 두 개의 3차원 직각 좌표계간의 좌표변환은 3차원 상사변환(similarity transformation)이 사용된다. 하지만 자유 입체 모자이크 영상의 3차원 모델좌표는 원점으로부터 떨어질수록 오차가 누적되어 선형변환을 이용한 좌표변환을 수행하기 어렵다. 따라서 이러한 자유 입체 모자이크 영상의 모델좌표를 절대좌표로 변환하기 위한 3차원 비선형 변환 방법이 필요하다. 또한 절대좌표계로 표현된 수치지도와 입체 모자이크 영상을 중첩하여 사용하기 위해서는 자유 입체 모자이크 영상을 실좌표 입체 모자이크 영상으로 변환하기 위한 방법이 필요하다. 따라서 본 연구에서는 자유 입체 모자이크 영상의 3차원 모델좌표를 3차원 절대좌표로 변환하기 위한 3차원 비선형 변환 방법과 이 방법을 기반으로 자유 입체 모자이크 영상을 실좌표 입체 모자이크 영상으로 제작하기 위한 2차원 비선형 변환방법을 제안하였다.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.131-138
• /
• 2012

PURPOSES : Two-lane highways have one lane in each direction, and lane changing and passing maneuvers take place in the opposing lane depending on the availability of passing sight distance. 2001 Korea Highway Capacity Manual (KHCM) is classified into two classes of two-lane highways (Type I, II), and average travel speed and time-delayed rate are used as measures of effectiveness (MOEs). However, since existing two-lane highways have both uninterrupted and interrupted traffic flow-system elements, a variety of free-flow speeds exhibits in two-lane highways. In addition, it is necessary to check if the linear-relationship between volumes and time-delayed rate is appropriate. Then, this study is to reestablish the relationship between average travel speed, time-delayed rate, and flow. METHODS : TWOPAS model was selected to conduct this study, and the free-flow speeds of passenger cars and the percentage of following vehicles observed in two-lane highways were applied to the model as the input. The revised relationships were developed from the computer simulation. RESULTS : In the revised average travel speed vs. flow relationship, the free-flow speed of 90km/h and 70km/h were added. It shows that the relationship between time delayed-rate and flow appeared to be appropriate with the log-function form and that there was no difference in time-delayed rate between the free flow speeds. In addition to revise the relationships, the speed prediction model and the time-delayed rate prediction model were also developed. CONCLUSIONS : The revised relationships between average travel speed, time-delayed rate, and flow would be useful in estimating the Level of Service(LOS) of a two-lane highway.

• 한국정보통신학회논문지
• /
• 제24권7호
• /
• pp.914-924
• /
• 2020

본 연구에서는 소셜 네트워크를 생성 할 수 있는 인공적인 네트워크 발생 모델을 제안 하였다. 본 연구에서 제안한 발생 모델은 온라인 소셜 네트워크의 특징인 Small-World 성질과 Scale-Free 성질을 단순하게 표현하는 것에서 벗어나 모델의 두 파라메터를 적절히 조절함으로서 사용자가 원하는 다양한 위상 특성치 값들을 나타내 줄 수 있도록 하였다. 이를 위해 Preferential Attachment의 세기를 조정 할 수 있도록 파라메터 K와 군집화 계수를 적절하게 조정 할 수 있도록 파라메터 P를 도입하였다. K가 0에서 10 그리고 P가 0.3에서 0.5 사이의 조합이나 K = 0과 P = 0.9를 이용하면 소셜 네트워크의 위상적 성질을 보유하는 인공적인 네트워크를 생성할 수 있다. 이 조합 하에서는 Small-World 성질과 Scale-Free 성질이 잘 나타난다. 노드차수 분포는 Power-Law를 따른다. 또한 군집화 계수 0.130 ~ 0.238, 평균 최단거리 5.641 ~ 5.985로 나타났다. 또한 네트워크의 크기를 노드 5,000개에서 10,000개로 증가시켜도 소셜 네트워크 성질을 그대로 유지하는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제18권2호
• /
• pp.201-213
• /
• 2020

Seismic damages that occurred by the effects of epicenter distance of the earthquake are one of the most important problems for the earthquake engineering. In this study, it is aimed to examine the nonlinear seismic behaviors of concrete gravity (CG) dams considering various epicenter distances. For this purpose, Boyabat CG dam that is one of the biggest concrete gravity dams in Turkey is selected as a numerical application. FLAC3D software based on finite difference method is used for modelling and analyzing of the dam. Drucker-Prager nonlinear material model is used for the concrete body and Mohr-Coulomb nonlinear material model is taken into account for the foundation. Special interface elements are used between dam body and foundation to represent interaction condition. Free-field and quiet non-reflecting boundary conditions are utilized for the main surfaces of 3D model. Total 5 various epicenter distances of 1989 Loma Prieta earthquake are considered in 3D earthquake analyses and these distances are 5 km, 11 km, 24 km, 85 km and 93 km, respectively. According to 3D seismic results, x-y-z displacements, principal stresses and shear strain failures of the dam are evaluated in detail. It is clearly seen from this study that the nonlinear seismic behaviors of the CG dams change depending to epicenter distance of the earthquake. Thus, it is clearly recommended in this study that when a CG dam is modelled or analyzed, distance of the earthquake fault to the dam should be strongly examined in detail. Otherwise, earthquake damages can be occurred in the concrete dam body by the effects of seismic loads.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.242-247
• /
• 2009

In this paper, we investigate interference between short-range radiocommunication devices (SRDs) with frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-Carlo (MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate (BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than bandwidth does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.53-59
• /
• 2001

In this Paper, the resistance performances of twin hull forms, which are simplified as two-dimensional wedge shape, are experimentally investigated in low and middle speed ranges to find out the effect of distance between two hulls and fore-body shape for the future hull form development of catamaran type sweeping vessel. The model tests are performed for seven different cases for three models in the circulating water channel(CWC) of Inha Technical College. The free surface flows are observed together to investigate the relation between resistance performance and free surface characteristics. A conceptual design for the modification of bow hull form is presented and the efficiency is discussed.

• Bulletin of the Korean Chemical Society
• /
• 제12권5호
• /
• pp.468-473
• /
• 1991

Viscoelastic properties of PET filament fibers on stress relaxation were investigated in the solvents of $H_2$O, 0.05% NaOH and 50% DMF using an Instron (UTM4-100 Tensilon) with solvent chamber. The theoretical stress relaxation equation derived by applying the Ree-Eyring's hyperbolic sine law to dashpot of three element non-Newtonian model was applied to the experimental stress relaxation curves, and the model parameters $G_1,G_2$, ${\alpha}$ and ${\beta}$ were obtained. By analyzing temperature dependency of the relaxation time, the values of activation entropy, activation enthalpy and activation free energy for flow in PET filament fiber were evaluated, the activation free energy being about 25.7 kcal/mol. The self diffusion coefficient and hole distance were obtained from parameters ${\alpha}$, ${\beta}$ and crystallite size in order to study the self diffusion and the orientation of crystallites in amorphous region and the effect of solvent.