• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.602-610
• /
• 2001

In the MPLS(Multiprotocol Label Switching) forwarding paradigm, once a packet is assigned to a FEC(Forwarding Equivalence Class), no further header analysis is done by subsequent routers; all forwarding is driven by the labels. This has a number of advantages over conventional network layer forwarding. The MPLS LER(Label Edge Router) is located at the boundary of MPLS domain and plays a role in connecting with the existing Internet as an ingress or an egress router. That is, the MPLS LER as an ingress router assigns a label to a packet which enters the MPLS network from the Internet by analyzing its header and forwards to a corresponding next router in MPLS domain. As an egress router, the MPLS LER turns the packets out of the MPLS network by performing the reverse operation. In this paper, we analyze the traffic performance of an MPLS LER system and estimate the IP(Internet Protocol) packet processing capacity of the system using queueing model and simulation. It is found that the maximum IP packet processing capacity of the system is estimated by 420,000 through 460,000 packets/sec.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.351-358
• /
• 2003

This paper describes distribution characteristics of switching surge voltage in stator windings of induction motor driven by IGBT PWM inverter. To analyze the voltage distribution between the turns and coils of stator winding, equivalent circuit model of induction motor including cable was proposed and high frequency parameter is computed by using finite-element method (FEM). From the electro-magnetic transient program (EMTP) simulation of the whole system for induction motor, feeder cable, and PWM inverter, the variable effect on rising time of the inverter, cable length, and switching frequency on the voltage distribution is also presented. In order to experiment, an induction motor, 380[V], 50[HP], with taps from one phase are built to consider the voltage distribution so that these results can be helpful when filter was designed to remove high dv/dt.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1673-1681
• /
• 2015

A low dropout (LDO) regulator with a wide-bandwidth is proposed in this paper. The regulator features a Human Body Model (HBM) 8kV-class high robustness ElectroStatic Discharge (ESD) protection circuit, and two error amplifiers (one with low gain and wide bandwidth, and the other with high gain and narrow bandwidth). The dual error amplifiers are located within the feedback loop of the LDO regulator, and they selectively amplify the signal according to its ripples. The proposed LDO regulator is more efficient in its regulation process because of its selective amplification according to frequency and bandwidth. Furthermore, the proposed regulator has the same gain as a conventional LDO at 62 dB with a 130 kHz-wide bandwidth, which is approximately 3.5 times that of a conventional LDO. The proposed device presents a fast response with improved load and line regulation characteristics. In addition, to prevent an increase in the area of the circuit, a body-driven fabrication technique was used for the error amplifier and the pass transistor. The proposed LDO regulator has an input voltage range of 2.5 V to 4.5 V, and it provides a load current of 100 mA in an output voltage range of 1.2 V to 4.1 V. In addition, to prevent damage in the Integrated Circuit (IC) as a result of static electricity, the reliability of IC was improved by embedding a self-produced 8 kV-class (Chip level) ESD protection circuit of a P-substrate-Triggered Silicon Controlled Rectifier (PTSCR) type with high robustness characteristics.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1095-1104
• /
• 2004

An electronic services which are based on Internet/Intranet business transactions are available to e-market places and get the broader business concepts. Component-based e-commerce technology is a recent trend towards resolving the e-commerce chanange at both system and ap-plication levels. The basic capabilities of component based systems should include the plug and play features at various granularities, interoper-ability across networks and mobility in various networking environments. E-business application developers are attempting to more towards web-service as a mechanism for developing component-based web-applications. Traditional process and development models are inadequately architectured to meet the rapidly evolving needs for the future of scalable web services. In this thesis, we focus specifically on the issues of e-business system architecture based on web service for establishing e-business system. We specifies and identifies design pattern for applying e-business domain in the context of multiple entities. We investigate prototype and frameworks to develope components for e-business application based suggested process. We present a worked example to demonstrate the behavior of Customer Authentication System(CAS) development with component and recommend process. Final]Y, we indicate and view on future directions in component-based development in the context of electronic business.

• Journal of Arbitration Studies
• /
• v.11 no.1
• /
• pp.37-73
• /
• 2001

I. Preface It is widely understood that the 21st century, with the development of information technology(IT) and the spread of networks, will be called a digital economy where information-driven business will be norm rather than the smokestack economy of the past. And the drastically changed world market is expected to generate even more commercial transactions across the world creating large numbers of legal disputes. Therefore, each country will attempt to develop ADR(Alternative Dispute Resolution) as an alternative to judicial proceedings in order to cope with not only the ever-increasing international commercial claims but also domestic legal disputes. Taking this reality into account, this study begins with an exploration of mediation procedure as a way of helping the court faced with its overwhelming numbers of lawsuits. And also this study makes a theoretical comparison between ADR and mediation procedure, analyzing critical factors affecting the mediation agreement. Furthermore, it is designed to find ways for disputing parties to make better use of mediation and ensure fairness to the parties involved. It tries to enhance mediators' understanding of critical factors influencing the mediation agreement and their ability to handle commercial disputes in a more efficient way. To make an empirical analysis of these factors, bibliographic research and questionnaire were used. This analysis will fill the gap between the theory and reality, and make possible the structured research on the factors. Therefore, this study sets the model by which we can evaluate how the three critical factors (parties' inclination, mediators' characteristics, institutional features) affect the parties reaching a mediation agreement. Based on this analysis, a theoretical hypothesis was built and a questionnaire was made and distributed. During the course of this work, SPSSWIN 10.0 program was applied.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.67-80
• /
• 2017

This paper presents a hole-filling method using extrapolated spatio-temporal background information to obtain a synthesized view. A new temporal background model using non-overlapped patch based background codebook is introduced to extrapolate temporal background information In addition, a depth-map driven spatial local background estimation is addressed to define spatial background constraints that represent the lower and upper bounds of a background candidate. Background holes are filled by comparing the similarities between the temporal background information and the spatial background constraints. Additionally, a depth map-based ghost removal filter is described to solve the problem of the non-fit between a color image and the corresponding depth map of a virtual view after 3-D warping. Finally, an inpainting is applied to fill in the remaining holes with the priority function that includes a new depth term. The experimental results demonstrated that the proposed method led to results that promised subjective and objective improvement over the state-of-the-art methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.399-410
• /
• 2002

Web cache, which is functionally another word of proxy server, is located between client and server. Web cache has a limited storage area although it has broad bandwidth between client and proxy server, which are usually connected through LAN. Because of limited storage capacity, existing objects in web cache can be deleted for new objects by some rules called replacement algorithm. Hit rate and byte-hit rate are general metrics to evaluate replacement algorithms. Most of the replacement algorithms do satisfy only one metric, or sometimes none of them. In this paper, we propose two replacement algorithms to achieve both high hit rate and byte-hit rate with great satisfaction. In the first algorithm, the cache is appropriately partitioned according to file types as a basic model. In the second algorithm, the cache is composed of two levels; the upper level cache is managed by the basic algorithm, but the lower level is collectively used for all types of files as a shared area. To show the performance of the proposed algorithms, we evaluate hit rate and byte-hit rate of the proposed replacement algorithms using the trace driven simulation.

• Spatial Information Research
• /
• v.16 no.4
• /
• pp.385-400
• /
• 2008

This study investigates how Korean Land Spatialization Group (KLSG) has controlled and managed its own R&D effectively and what particular elements have made it practical. Korean Land Spatialization Program (KLSP) has produced large amounts of practical outcomes for the intelligent land by collaborative 5 core research projects. The well-harmonized cooperations between proving ground, practical business model, and services oriented integration and others have driven the KLSG to an succeedable management. The active role for practicality is prominent with its usefulness and competitiveness. KLSP is financially and administratively supported from Ministry of Land Transport and Maritime Affairs of Korea (MLTM). By investigating relationships between 5 core research projects involved in the R&D projects of KLSG, it has been found out that R&D projects of KLSG bring forth practicality and commercialization. The results of this study presents strategies of KLSP in conducting research for practicality and commercialization of GIS technology and integrated geospatial information.

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.3-8
• /
• 2017

In this study future wind resource maps have been produced under climate change scenario using ensemble regional climate model weather research and forecasting(WRF) for the period from 2045 to 2054(mid 21st century). Then various spatiotemporal analysis has been conducted in terms of monthly and diurnal. As a result, monthly variation(monsoon circulation) was larger than diurnal variation(land-sea circulation) throughout the South Korea. Strong wind area with high wind power energy was varied on months and regions. During whole years, strong wind with high wind resource was pronounced at cold(warm) months in particular Gangwon mountainous and coastal areas(southwestern coastal area) driven by strong northwesterly(southwesterly). Projected strong and weak wind were presented in January and September, respectively. Diurnal variation were large over inland and mountainous area while coastal area were small. This new monthly and diurnal variation would be useful to high resource area analysis and long-term operation of wind power according to wind variability in future.

• Archives of Plastic Surgery
• /
• v.40 no.4
• /
• pp.312-319
• /
• 2013

Over the past decade, driven by advances in educational theory and pressures for efficiency in the clinical environment, there has been a shift in surgical education and training towards enhanced simulation training. Microsurgery is a technical skill with a steep competency learning curve on which the clinical outcome greatly depends. This paper investigates the evidence for educational and training interventions of traditional microsurgical skills courses in order to establish the best evidence practice in education and training and curriculum design. A systematic review of MEDLINE, EMBASE, and PubMed databases was performed to identify randomized control trials looking at educational and training interventions that objectively improved microsurgical skill acquisition, and these were critically appraised using the BestBETs group methodology. The databases search yielded 1,148, 1,460, and 2,277 citations respectively. These were then further limited to randomized controlled trials from which abstract reviews reduced the number to 5 relevant randomised controlled clinical trials. The best evidence supported a laboratory based low fidelity model microsurgical skills curriculum. There was strong evidence that technical skills acquired on low fidelity models transfers to improved performance on higher fidelity human cadaver models and that self directed practice leads to improved technical performance. Although there is significant paucity in the literature to support current microsurgical education and training practices, simulated training on low fidelity models in microsurgery is an effective intervention that leads to acquisition of transferable skills and improved technical performance. Further research to identify educational interventions associated with accelerated skill acquisition is required.