• 한국정보통신학회논문지
• /
• 제16권12호
• /
• pp.2708-2715
• /
• 2012

본 논문은 모델기준적응제어 및 직접토크제어 방식을 이용한 새로운 유도전동기의 센서리스 속도제어 방법을 제안한다. 모델기준적응제어는 기준모델과 조정모델을 설정하고 이들의 출력을 비교하여 조정모델 및 제어를 위한 속도 추정값을 얻는 제어법이다. 그리고 직접토크제어는 토크와 자속을 독립적으로 제어하는 방법으로 토크, 자속 지령치와 전동기 고정자 전압, 전류 값을 이용해 추정한 토크, 자속을 비교하여 히스테리시스 밴드를 거쳐 그 오차를 가장 최소화하기 위한 전압벡터를 선정하여 출력하는 방법이다. 본 논문에서는 제안한 방식의 이론적인 배경 및 타당성에 대해 기술하였으며 모의실험을 통해 제안된 방식의 우수성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1069-1072
• /
• 1996

In modern control engineering, the model following system is a typical method. The model following system's performance is due to algorithm of control law, accuracy of modeling to the plant, and dynamics of the reference model. But the determination of the reference model depends on knowledge of an expert. Using an expert system, the determination method of the reference model was proposed in this paper. So, the reference model can be selected by user who has no Knowledge of dynamics and parameters.

• 한국항공우주학회지
• /
• 제49권9호
• /
• pp.749-757
• /
• 2021

쿼드로터를 활용한 운송 임무에서 임의의 유상하중을 장착하게 되면 질량, 관성모멘트, 무게중심의 위치와 같은 모델 파라미터가 변화하게 된다. 더욱이 유상하중이 기체에 장착되는 위치가 기체의 무게중심과 일치하지 않는 경우 무게중심의 변화는 야기되며 이는 제어 성능에 악영향을 미치게 된다. 이에 본 논문에서는 유상하중에 따른 모델의 불확실성을 보상하기 위하여, 선형 제차 조정기(Linear Quadratic Regulator, LQR) 기반의 모델 참조 적응 제어기법(Model Reference Adaptive Control, MRAC)을 제안한다. 먼저 고정된 유상하중을 고려한 쿼드로터의 동역학 모델을 유도하고, 선형 제차 조정기를 이용하여 기준제어기를 선정한다. 참조 모델은 과도응답을 향상하기 위해 폐루프 참조 모델을 사용하였으며, 선형 제차 조정기를 통하여 선정하였다. 또한, 안정성 분석을 통하여 모델 파라미터를 추정하기 위한 적응 제어기법을 설계하였다. 제안하는 제어기의 성능을 확인하기 위하여 모델 파라미터의 불확실성이 존재하는 상황에서 선형 재차 조정기와 성능을 비교하였다. 그리고 외란이 있는 상황에서 기존의 모델 참조 적응 제어기법과도 제안한 제어기의 결과를 비교하여 과도응답과 강건성에 대해서도 분석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1500-1505
• /
• 2004

This paper presents the design and control of a small Brushless DC (BLDC) Motor for entertainment robots. In order to control the developed BLDC motor, Adaptive Fuzzy Control (AFC) scheme via Parallel distributed Compensation(PDC) is developed for the multi- input/multi-output plant model represented by the Takagi-Sugeno(TS) model. The alternative AFC scheme is proposed to provide asymptotic tracking of a reference signal for the systems with uncertain or slowly time-varying parameters. The developed control law and adaptive law guarantee the boundedness of all signals in the closed-loop system. In addition, the plant state tracks the state of the reference model asymptotically with time for any bounded reference input signal. The suggested design technique is applied to the velocity control of a developed small BLDC motor for entertainment robots.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.181-185
• /
• 2001

This paper presents a digitally speed sensorless control system for induction motor with direct torque control (DTC). The drive is based on Mode1 Reference Adaptive System (MRAS) using state observer as a reference model fat flux estimation. The system are closed loop stator flux and torque observer for wide speed range that inputs are currents and voltages sensing of motor terminal, model reference adaptive control (MRAS) with rotor flux linkages for the speed turning aignal at low speed range, two hysteresis controllers. The Proposed system is verified through simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.548-552
• /
• 1994

The robust compensation controller, which has been proposed by one of the authors and is based on the fundamental principle of making the plant follow the reference model, consists of the reference model and the robust compensator. The reference model is constructed by using the nominal model of the plant and determines the input-output properties of the resultant system. The robust compensator is obtained as a solution of the mixed sensitivity problem in H infinity control theory. Therefore the resultant system is of low sensitivity and robust stability. In the case where uncertainty does not occur in the plant, the plant follows perfectly the reference model. Therefore, in the case where uncertainty occurs in the plant, we propose the system configuration which improves the following accuracy without replacing the 개bust compensator but by identifying, the plant and reconstructing the reference model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2064-2066
• /
• 2002

This paper proposes Model Reference Adaptive Fuzzy System(MRAFS) using Fuzzy Logic Controller(FLC) as a adaptive laws in Model Reference Adaptive System(MRAS) in order to realize the speed-sensorless control of an induction motor. MRAFS estimates the speed of an induction motor with a rotor flux of a reference model and adjustable model in MRAS. Fuzzy logic controller reduces the error of the rotor flux between the reference model and the adjustable model using the error and the change of error as the input of FLC. The computer simulation is executed to verify the propriety and the effectiveness of the proposed system.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1356-1368
• /
• 2001

In this paper, the model reference adaptive control (MRAC) of a flexible structure is investigated. Any mechanically flexible structure is inherently distributed parameter in nature, so that its dynamics are described by a partial, rather than ordinary, differential equation. The MRAC problem is formulated as an initial value problem of coupled partial and ordinary differential equations in weak form. The well-posedness of the initial value problem is proved. The control law is derived by using the Lyapunov redesign method on an infinite dimensional filbert space. Uniform asymptotic stability of the closed loop system is established, and asymptotic tracking, i. e., convergence of the state-error to zero, is obtained. With an additional persistence of excitation condition for the reference model, parameter-error convergence to zero is also shown. Numerical simulations are provided.

• International Journal of Control, Automation, and Systems
• /
• 제4권1호
• /
• pp.70-76
• /
• 2006

The objective of this paper is to propose a reference model of a fire detection and monitoring system using MS/TP protocol. The reference model is designed to satisfy the requirements of response time and flexibility. The reference model is operated on the basis of BACnet, a standard communication protocol for building automation systems. Validity of the reference model was examined using a simulation model. This study also evaluated the performance of the BACnet-based fire detection and monitoring system in terms of network-induced delay. Simulation results show that the reference model satisfies the requirements of the fire detection and monitoring system.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.88-95
• /
• 2005

This paper presents a design scheme of model reference adaptive control incorporating a Neural Network for a pneumatic servo system. The parameters of discrete-time model of plant are estimated by using the recursive least square method. Neural Network is utilized in order to compensate the nonlinear nature of plant such as compressibility of air and frictions present in cylinder. The experiment of a trajectory tracking control using the proposed control scheme has been performed and its effectiveness has been proved by comparing with the results of a model reference adaptive control.