• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.487-490
• /
• 2002

In this paper, we report a novel way to evaluate the anticlinic interlayer coupling coefficient U between smectic layers of an antiferroelectric liquid crystal, by utilizing a small field-induced perturbation of the molecular orientation. U was found to exhibit an unusual "S-shaped" dependence on temperature, with values ranging between $0.4{\times}10^4$ and $0.4{\times}10^{-1}$ erg $cm^{-3}$ over a 10$^{\circ}C$ temperature range below smectic A-smectic $C_A$ phase transition temperature. The results are good agreement with estimates for U based upon the threshold field for the onset of solitary waves, and provide strong supporting the low-field regime for the single Fourier component model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.137-140
• /
• 2002

The frequency response analysis of complex impedance spectra using small perturbation ac impedance spectroscopy is an informative method of OLED performance characterization and lifetime analysis. Using simple RC equivalent circuit mode,l macroscopic nonliniear transport properties of semiconductive emission/transport layers can be analyzed and parameterized. We present the bias voltage dependence and aging effect in impedance spectra measured from an ITO/CuPC/TPD/$Alq_3$/LiF/Al OLED device, and discuss possible failure mechanism based on impedance model parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.842-847
• /
• 2002

One of the challenging problems with bicycle simulators is to deal with the inherent unstable bicycle dynamics that is coupled with rider's motion. For the bicycle dynamics calculation and the real time simulation, it is necessary to identify the control inputs from the rider as well as the virtual environments. The six control forces of the Stewart platform-based motion system are used for estimation of the rider's action force, which is one of the important control inputs, but of which the direct measurement is impractical. For the effective estimation of the rider's action force, the dynamics model of the motion system is derived incorporated with both analytical and experimental methods and the sliding mode controller with perturbation estimation is developed.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.72-79
• /
• 2005

Compared with linear induction principle, the transverse flux circumferential induction principle is suggested as a driving mechanism of the revolving stage, which can rotate contactlessly without any supporting structure. The stage realizes the integrated motion of levitation, rotation, and planar perturbation, using the two-axis forces, normally directed force of the air-gap and tangential force, of the induction drivers mounted on the stator uniformly. In this paper, the force generating mechanism of the stage is described in detail. First, the various core shapes generating the transverse flux are analyzed to guarantee the proper thrust force. And the vector force intensity of the circumferential induction driver constituting the stage is compared with that of the linear induction driver. Especially it is shown that the magnetic force of the suggested system can be modeled with the linear equivalent model, including the test verification.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.168-176
• /
• 2006

Nowadays, Three dimensional printing (3DP) technique that is one of solid freeform fabrication (SFF) technology has been notable issue, and has been applied by various fields. The SFF system can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. In this research, a SFF system to analyze 3DP process technology is developed. We applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm and minimized position error to the developed SFF system. We analyzed and optimized process variables such as jetted volume, layer thickness, powder bed and so on experimentally. Also. the dimensional error of a developed SFF system is evaluated. Finally, the feasibility of application to bio manufacturing is presented through successful fabrication of teeth and cranium model.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.267-272
• /
• 2003

This paper presents a performance analysis model of corrugated bump foil bearings. The analyses for not only 1st generation bump foil journal bearings but also bump foil thrust bearings are performed. Static performances such as load capacity, attitude angle, pressure distribution, foil deflection, and film thickness are accurately estimated by using soft elasto-hydrodynamic analysis technique and finite difference numerical method. Also dynamic performances such as stiffness coefficients and damping coefficients are estimated by perturbation method. The analysis technique may be appliable to rotordynamic analysis, stability analysis, and optimized bearing design.

• 천문학회보
• /
• 제36권2호
• /
• pp.51.2-51.2
• /
• 2011

We have studied the topology of volume-limited galaxy sample selected from the very luminous red galaxies (LRGs) in the completed Sloan Digital Sky Survey. LRGs are predominantly massive elliptical galaxies and tend to reside in massive dark matter halos. We compared the observed genus statistics with predictions from perturbation theory and mock LRG surveys constructed from dark matter halos in a Lambda CDM model. To compare with the observational data, we made 129 mock surveys in the past light cone space by using three different size CDM simulations: 41203 particle 6592 Mpc/h, 60003 particle 7200 Mpc/h, and $7210^3$ particle 10815 Mpc/h.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.241-249
• /
• 2003

A molecular-thermodynamic model to describe the salt-induced protein precipitation is developed based on the perturbation theory. We employed the modified perturbed hard-sphere-chain (PHSC) equation of state for copolymer mixtures to take into account the pre-aggregation effect among protein particles. Hypothetical pressure-composition diagrams are computed with various size differences and salt concentrations. The precipitation behaviors are also studied for various types of pre-aggregation effect for the given systems.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2906-2910
• /
• 2014

This report introduces Gaussian electrostatic models (GEMs) to account for charge penetration effects in water-water interactions, allowing electrostatic interactions to be accurately described. Three different Gaussian electrostatic models, GEM-3S, GEM-5S, and GEM-6S are designed with s-type Gaussian functions. The coefficients and exponents of the Gaussian functions are optimized using the electrostatic potential (ESP) fitting procedure based on that of the MP2/aug-cc-pVTZ method. The electrostatic energies of ten different water dimers that were calculated with GEM-6S agree well with the results of symmetry-adapted perturbation theory (SAPT), indicating that this designed model can be effectively applied to future water models.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1996년도 제11회 수중음향학 학술발표회 논문집 11th Underwater Acoustics Symposium Proceedings
• /
• pp.45-50
• /
• 1996

천해에서 얻은 잔향음신호를 역추정 알고리즘으로 분석하여 자료수집 당시의 환경 변수인 해상풍의 세기와 해저면의 상태를 추정하는 방법에 대하여 기술하였다. 소오나 시스템과 잔향음신호 수집 당시의 환경 자료를 알고 있다면 음원에서 방사된 음파가 해수면에 처음 도달하는 시간과 수평입사각을 multipath eigenray model에 의해서 계산할 수 있고 이 정보를 이용하여 수신된 잔향음 신호를 분석하여 해수면에 의한 산란잔향음 준위와 시간을 계산할 수 있다. 해수면 후방산란강도는 수평입사각, 음원의 주파수, 해상풍의 세기 등에 의해 특징지어지며 계산된 잔향음 준위로부터 소오나 방정식을 이용하여 후방산란강도를 알아낼 수 있다. 이 후방산란강도를 입력자료로 하여 Method of Small Perturbation이론과 Chapman과 Harris가 유도한 실험식을 사용하여 입력된 값과 일치할 때까지 후방산란강도를 계산하여 이때의 환경변수를 찾아내었다. 한편 해저면 잔향음신호는 표준화된 후방산란강도값들의 PDF를 만들어 그 분포양상을 분석하였다. 본 논문에서 사용된 알고리즘의 검증을 위해서는 보다 다양한 환경하에서 실시된 많은 음향괸측자료를 필요로 한다.