• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.5
• /
• pp.422-431
• /
• 2003

Theory of the building heat transfer is generally limited to the heat flux to the surfaces of windows and walls, which influences the indoor climate of a building, in the field of architectural environmental engineering. While the heat flux from the buildings to their environment has been considered in the viewpoint of urban climate, its conventional theory have been rarely examined. The purpose of this study is to propose a building-urban heat transfer model for defining the relation between the building and the urban climate by extending the building heat transfer model. In this study, the extended building heat transfer model, where response factor method is used, is established on the urban space and the indoor space by the boundary of building envelopes. Computer simulation (HASP/ACLD) is conducted on the subjected urban area by the established building-urban heat transfer model. As a result it is logically proved that the short waves of solar radiation, which interact with long Waves of radiation from the buildings and the earth, increase the urban air temperature ana buildings largely influence on the urban climate.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.926-934
• /
• 2007

The purpose of this study was to measure the effects of restaurant service quality dimensions on service value, satisfaction, and behavior intention. A total of 273 questionnaires were completed. A structural equation model was used to measure the causal effects. The results of the study show that the confirmatory factor analysis model presented an excellent model fit. The unrestricted model yielded a significantly better fit to the data than the two restricted models. In the unrestricted model, the effect of reliability on service value was statistically significant. The effects of tangibles and empathy on satisfaction were also statistically significant. As expected, empathy had a significant effect on behavior intention. Moreover, empathy had a significant indirect effect on behavior intention through service value and satisfaction. Restaurants should devote themselves to factors such as reliability in order to improve service value. Also, attention must be given to another important factor, empathy, since this influenced not only satisfaction, but also behavior intention.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.4 s.33
• /
• pp.23-32
• /
• 2006

Recently, Owing to booming of leisure activities and national enforcement of 5-day workweek system, Korean government has been promoting rural tourism policy of which operating project's title is Green Rural Experience Village, Rural Traditional Theme Village, etc. In this study, ken investigation result on Green Rural Experience Village sites, an estimation model of returns by green-tourism activities was developed. The model was constructed through factor analysis and regression analysis method. Regression model developed can estimate green-tourism revenue by investment budget, homepage preengagement sales, homepage visitors, capacity of eating and drinking facilities, capacity of lodging facilities. The model developed was applied in sample villages. With these results, estimation revenue was recorded average 138.3% of survey revenue, and statistical significance was good(correlation coefficient $R^2$ = 0.8255, level of significance : 0.000), and the range of relative error was recorded largely from -7.1% to 158.6%, and average relative error was 38.3% and good. And, the model developed in this study have the critical point in aspects of insufficient data, but the results will be used in green-tourism policies and projects, and revenue estimation about each village in the present and future is limited, but in province or the whole country the application is good.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.13-21
• /
• 1992

In the previous study, car interior noise was analyzed using structural acoustic mode coupling coefficients and noise response in vehicle compartment model was simulated by the developed special purpose program. As a continued study, this paper presents a practical scheme for the interior noise reduction of a passenger car. Noisy panels on the vehicle compartment wall could be easily identified by the analysis using mode coupling coefficients. Numerical simulation for noise reduction was carried out on a simplified vehicle compartment model by using panel contribution factor and the noise reduction effect was verified by the structural modification test using Steel Skin (damping sheet).

• The Journal of Society for e-Business Studies
• /
• v.18 no.4
• /
• pp.241-255
• /
• 2013

Convergence service, which is a combination of various services, is becoming more important. Among the many examples of convergence service, this study aims to analyze telematics service. By dividing Telematics service into information services and entertainment services, it was empirically proved that the relationship between each dimensions of TAM (perceived ease of use, perceived usefulness, purchase intention) and each service satisfaction, price, design factor. According to the result of structure equation model, service satisfaction and design factor have a significant effect on perceived ease of use, but not on perceived usefulness. It means that the perceived ease of use factor should be emphasized, because of service characteristics that are used during driving.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.4
• /
• pp.63-69
• /
• 2003

In discontinuous composite mechanics, shear lag theory is one of the most popular model because of its simplicity and accuracy. However, it does not provide sufficiently accurate strengthening predictions in elastic regime then the fiber aspect ratio is small. This is due to its neglect of stress transfer across the fiber ends and the stress concentrations that exist in the matrix regions near the fiber ends. To overcome this shortcoming, a more simplified shear lag model introducing the stress concentration factor which is a function of several variables, such as the modulus ratio, the fiber volume fraction, the fiber aspect ratio, is proposed. It is found that the modulus ratio($E_f$/$E_m$) is the essential variable among them. Thus, the stress concentration factor is expressed as a function of modulus ratio in the derivation. It is found that the proposed model gives a good agreement with finite element results and has the capability to correctly predict the values of interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.66-72
• /
• 2016

Gearboxes are mechanical components that transmit power by adjusting input and output speed and torque. Their design requirements include small size, light weight, and long lifespan. We have investigated the effects of carrier pinhole position error on the load sharing and load distribution characteristics of a planetary gear set with four planet gears. The simulation model for a simple planetary gear set was developed and verified by comparing analytical results with a putative model. Then, we derived the load sharing and load distribution characteristics under various pinhole position error conditions using the prototypical simulation model. The results showed that the mesh load factor and face load factor increased with the pinhole position error, which then influenced the safety factor for tooth bending strength and surface durability.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.2229-2233
• /
• 2016

Background: Breast cancer is one of the most common cancers among women in the world. Early detection is necessary to improve outcomes and decrease related costs. The aim of this study was to assess the predictive power of health locus of control as a modifying factor in the Health Belief Model (HBM) for prediction of breast self-examination. Materials and Methods: In this cross- sectional study, 400 women selected through the convenience sampling from health centers. Data were collected using part of the Champion's HBM scale (CHBMS), the Health Locus of Control Scale and a self administered questionnaire. For data analysis by SPSS the independent T test, Chi square test, logistic and linear regression modes were appliedl. Results: The results showed that 10.9% of the participants reported performing BSE regularly. Health locus of control did not act as a predictor of BSE as a modifying factor. In this study, perceived self-efficacy was the strongest predictor of BSE performance (Exp (B) =1.863) with direct effect, while awareness had direct and indirect influence. Conclusions: For increasing BSE, improvement of self-efficacy especially in young women and increasing knowledge about cancer is necessary.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.367-374
• /
• 2012

A dynamic simulation and test of frame with thin walled closed section beams considering warping conditions have been performed. When a beam is subjected under torsional moment, the cross section will deform an warping as well as twist. For some thin-walled sections warping will be large, and accompanying warping restraint will induce axial and shear stresses and reduce the twist of beam which stiffens the beam in torsion. This paper presents that an warping restraint factor in finite element model effects the behavior of beam deformation and dynamic mode shape. The computer modelling of frame is discussed in linear beam element model and linear thin shell element model, also presents a correlation between computer predicted and actual experimental results for static deflection, natural frequencies and mode shapes of frame.

• Asia-Pacific Journal of Business
• /
• v.2 no.1
• /
• pp.49-73
• /
• 2011

With the market evaluation of economic globalization exchanges between different cultures, cultural trade has been developing at an accelerated speed, and also playing an important role in East Asian intra-regional trade. In this research the author used gravity trade model to explain the causal relationship between dependent variable trade flows and several independent variables applying with five categories cultural goods which classified in HS codes. Firstly for cultural heritage trade flow, the results indicated that economic masses of bilateral countries have no significant influences on it; GDP per capita of host country and adjacency factor with partner country have significant negative influences on it; Internet coverage ratio has improved cultural heritages exchanges in East Asian regions. Secondly for printed matter cultural goods trade flow, the distance factor has significant negative influence but common language has significant positive influence on it. Thirdly for recorded media cultural goods, only economic masses and GDP per capita of bilateral countries can improved their trade flows. Fourthly for visual arts cultural products trade flows, almost all variables we tested have significant influences on it. Fifthly for cinema photography cultural goods trade flow, the influenced factor are same with cultural heritage products except they have strong positive interaction relationship with economic masses and common language. At last, the paper figured out some important and potential sectors for cultural goods trade in East Asia and gave some suggestions to government and cultural goods product enterprises.