• Journal of the Korean Data and Information Science Society
• /
• v.27 no.1
• /
• pp.191-201
• /
• 2016

The purpose of this study was to explore the correlation among professional self-concept, self-efficacy and job satisfaction and to identify the effect of professional self-concept and self-efficacy on job satisfaction in general hospital nurses. Questionnaires were completed by 156 nurses who were working for one general hospital in Busan. The mean score of professional self-concept and self-efficacy were $3.02{\pm}0.23$ and $2.92{\pm}0.21$ respectively. The mean score of job satisfaction was $2.76{\pm}0.26$. With respect to job satisfaction, the correlations were .325 (p<.001) for professional self-concept and .212 (p=.008) for self-efficacy. As integrate of the study result showed job satisfaction had correlation to professional self- concept and self-efficacy. The regression model explained 12.6% of job satisfaction. Professional self-concept was factor influencing job satisfaction. So professional self-concept enhancement strategies and self-efficacy improvement programs should be developed to improve job satisfaction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.264-279
• /
• 2005

Statement of problem. Intraoral corrosion not only affects the esthetic and function of metallic dental restoration, but also has biologic consequences as well. Therefore, corrosion is considered a primary factor when choosing the dental alloy and laboratory technique. Purpose. The objective of this study was to compare the effects of solder and laser weld on corrosion Material and methods. Test specimens were made of 2 types of gold alloys, Co-Cr and Ni-Cr alloy and fabricated 3 methods, respectively: as cast, solder, and laser weld. For the analysis of corroding properties, potentiodynamic polarization test and immersion test conducted. The potentiodynamic polarization scan curve were recorded in 0.9% NaCl solution(pH 7) using Potentiostat/Galyanostat Model 273A. All specimens were exposed to 0.9% NaCl solution(pH 2.3) during 14 days. Elemental release into corrosive solution was measured by atomic emission spectrometry Differences in corrosion potential and mass release were determined using ANOVA. Results and conclusion. Through analyses of the data, following results were obtained. 1. In Pontor MPF and Wiron 99, corrosion potential of the solder group was statistically lower than as cast and laser weld group (p<0.05) , but there was no difference between corrosion potential of solder group and laser weld group in Pontor MPF and no differences between as cast and laser weld group (p>0.05). In Jel-Bios 10 and Wirobond, there was no difference of corrosion potential according to joining methods(p>0.05). 2. In all tested alloys, the amount of released metallic ion was greatest in the solder group(p<0.05). There was no difference between as cast group and laser weld group in Jel-Bios 10 and Wirobond(p>0.05). 3. In scanning electron microscopic examination. except soldered Wiron 99 specimens, it is impossible to discriminate the corrosive property of solder and laser weld. 4. Under the this experimental circumstances, laser weld appears superior to the solder when corrosion is considered.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.85-90
• /
• 2009

STATEMENT OF PROBLEM. Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in relation to the success rate of RBFPDs and considered retention and resistance form essential for increase of clinical retention. However, these criteria required preparations to be more invasive, which violates not only the original intentions of the RBFPD, but may also have an adverse effect on retention due to loss of enamel, an important factor in bonding. PURPOSE. The object of this in vitro study was to compare the dislodgement resistance of the new types of RBFPDs, the conventional three-unit fixed partial denture, and conventional design of RBFPD (Maryland bridge). MATERIAL AND METHODS. Fifty resin mandibular left second premolars and second molars were prepared on dentiforms, according to the RBFPD design. After model fabrication (five group, n = 10), prostheses were fabricated and cemented with zinc phosphate cement. After cementation, the specimens were subjected to tensile loading at a cross head speed of 4 mm/min in a universal testing machine. The separation load was recorded and analyzed statistically using one-way analysis of variance followed by Duncan's multiple range test. RESULTS. Group V, the pin-retained RBFPDs, had the highest mean dislodgement resistance, whereas specimens of group II, the conventional RBFPDs, exhibited a significantly lower mean dislodgement resistance compared to the other 4 groups (P <.05). There were no significant differences between group I, III, and IV in terms of dislodgement resistance (P>.05). Group V had the highest mean MPa (N/$mm^2$) (P <.05). There was no significant difference between groups I, II, III and IV (P > .05). CONCLUSION. Within the limits of the design of this in vitro study, it was concluded that: 1. The modified RBFPDs which utilizes the original tooth undercuts and requires no tooth preparation, compared with the conventional design of RBFPDs, has significantly high dislodgement resistance (P < .05). 2. The modified RBFPDs which utilizes the original tooth undercuts and requires minimal tooth preparation, compared with the conventional FPDs, has significantly no difference in retention and dislodgement resistance)(P>.05). 3. The pin-retained FPDs showed a high dislodgement resistance compared to the conventional three-unit FPDs (P<.05).

• Child Health Nursing Research
• /
• v.5 no.2
• /
• pp.185-197
• /
• 1999

In the family life cycle, the most important task the families with school children should perform is ‘child education’ and ‘socialization’ However, economic stress on poor families with school children presents multiple problems through the shortage of resources necessary for child education and socialization, inappropriateness of family appraisal, and the insufficiency of the control channels for the efficient management of these confined resources and appropriate appraisal. The objectives of this article are : First, to report research on the actual conditions of the poor families in one area of Cheju and on the relevant health welfare policy, and to examine the appropriateness of the direction and the substance of this policy in terms of the intervention in economic stress on the poor families under the categories of resource management and control of appraisal. Second, to analyze qualitative data extracted from the memoirs of single-parent families living in several areas of Korea under the conceptual framework constructed by literature review in order to get a better understanding of the stress which poor families with school children have experienced. And third, to confirm the factors that can be risk factor but, at the same time, strength to these poor families from presented data and to use them as the basic data from which an intervention model can be developed, based on resource management and control of appraisal. The findings of this article are : First, while the number of absolute poor families in one area of Cheju is increasing and, as a result, the danger of the possibility that multiple problems will occur is also growing, the supporting level of the current policy is no more than a direct resource offer and there is no evidence that resource management is being professionally carried out. When it comes to control of appraisal, due to absence of the professional human resources in this matter, policy performances such as technical education training can have a negative impact. Second, a conceptual framework introduced in this article, ; Economic Pressure → Helplessness → Poor self-esteem → Marital Conflict → Parent-Child financial conflict → Inappropriate socialization → Poor child social competence : is partly verified. And third, judging from the results of the qualitative data, it is confirmed that the healing families, having overcome poverty, show several positive characteristics including : hope, strength, and social support. These findings are identified with the factors of resiliency considered above. According to these results, this article suggests the following. The anti -poverty policy in the future should focus not only on a direct resource offer but also on resource management and the control of appraisal that can magnify its effects. In particular, close attention should be paid to school children since they are in the most crucial period for socialization. Moreover, an emotional labor is such an essential resource for intervention that skilled nurses should play pivotal roles.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1028-1034
• /
• 2005

The purposes of this study were to: (a) identify students' patronage behaviors on university foodservice, (b) evaluate customers' perception and detect complaints on food service quality, and (c) recommend new design of food service operation by identifying relative importance of university foodservice attributes. The questionnaire was developed and distributed to 400 undergraduates. Statistical data analysis was completed using SPSS/Win 12.0 for descriptive analysis and conjoint analysis. The results of this study were summarized as follows: Students were patronizing university foodservice 3.4 times per week because of 'a short distance', 'a low price' and 'speedy meals' and evaluated overall satisfaction and value as low level. Customers were dissatisfied with eight among twelve food service attributes including handling customer's complain ASAP, According to conjoint analysis, price $(37\%)$ was considered as the most important factor and atmosphere $(30\%),\;food\;(22\%)$ and distance $(11\%)$ were the next factors. Profile 2, which had 4 attributes of a location within 6-10 min, comfortable circumstances, a meal served with 4 side-dish and dessert and a meal price of \2,000 firstly, were recommend as new food service operation model.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• Journal of Families and Better Life
• /
• v.21 no.2
• /
• pp.1-18
• /
• 2003

In recent years, Korean society has witnessed an increased interest in the observance of everyday life proprieties, building healthy families, and psychological well-being of family members. The main purpose of this research was to examine the relationships among the practice of everyday life proprieties, dynamics of family systems, and psychological well-being of Korean married couples. A self-report Questionnaire was used to collect data from married couples with a child over four-years-old who are currently residing in Seoul. 513 couples(1026 individuals) were used for the final data analysis. Statistical analyses were conducted using frequencies, percentages, means, standard deviations, Cronbach'α, Pearson correlation, paired t-test, factor analysis, and multiple regression. The findings of this study are as follows: First, the level of the practice of everyday life propriety was relatively high in both husbands and wives, and no significant gender difference was found in the level. Yet, there were some statistically significant differences in certain sub-dimensions. Wives showed a higher degree of performance in public decorum and social etiquette, whereas husbands exhibited a higher degree of performance in family decorum and communication manners. The family systems were highly dynamic, according to both husbands and wives, and there was no difference between husbands and wives. As for the sub-dimensions, the extent of communication was found to be higher among husbands than among wives. Psychological well-being was again relatively high for both husbands and wives, with husbands significantly higher than wives. Second, the findings indicate that the causal model did fit the data well, and that a myriad of background variables had direct and indirect impacts on psychological well-being, and these relationships were mediated by several variables in the sub-dimension of proprieties observance, family adaptability, and the degree of communication. The implication is that the practice of life propriety, an intervening variable, is crucial in improving psychological well-being of married couples. The findings of this research demonstrate that there are significant causal relationships among the practice of everyday life propriety, family systems dynamics, and psychological well-being. In addition, the observance of proprieties is shown to be a concept that can be used as an important predictor in the area of family resource management. Further research is needed to expand its focus on the practice of proprieties in the family resource management. More concrete and specialized family life education programs should be developed to help build healthy families. Lastly, the results indicate that proprieties education needs to be incorporated in family policies in order to promote the quality of family life.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.78-88
• /
• 2016

Recently BIM technology has been expanded for using in construction project. However its spread has been delayed than the initial expectations, due to the high-cost of BIM infrastructure development, the lack of regulations, the lack of process and so forth. In design phase, especially, collaboration based on BIM system has being a key factor for successful next generation building project. Through the analysis of current research trend about IT technologies, virtualization and BIM service, data exchange such as drawing, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. In various industrial fields, cloud computing technology is utilized as a promising solution which can reduce time and cost of hardware infrastructure. Among the cloud computing technology, VDI is receiving a great deal of attention from it market as an essential part cloud computing. VDI enables to host multiple individual virtual machines by using hypervisor. It has an advantage to easy main device management. Therefore, this study implements a step-by-step user's DaaS by analyzing the desktop resource data of the workers from Pre-design phase to Schematic design, Design develop and Construction design phase. It also develops BIM environment based on test of BIM modeler and designers in architectural design firm. The goal of the study is to enable the cloud computing BIM server. It provides cost saving, high-performance quality of working environment and cooperation's convenience and high security when doing BIM work in small and medium sized architectural design firm.

• KDI Journal of Economic Policy
• /
• v.30 no.2
• /
• pp.61-97
• /
• 2008

This paper aims at analyzing the practice of job rotation in the Korean government and putting forward policy suggestions. The Korean government is often accused of low capacity and weak competitiveness, which mainly result from the low expertise of public officials. Considering the high quality of human resources flowing into the public sector in Korea, solutions should be found from the structure of the system. This paper regards frequent position changes due to excessive job rotation as a key factor undermining the accumulation of expertise and conducts in-depth analyses. The current practice of frequent rotation shows that the average tenure period of government officials at director level and above is only about one year, far shorter than those in major developed countries, which causes many problems such as low efficiency, lack of accountability and policy consistency, and low opportunity for accumulating expertise. Simple models are set up to analyze job rotation and other alternative personnel management systems. Analyses find that it would be desirable to have each individual experience various positions during the initial rotation period to find his/her own aptitude, and then accumulate expertise by settling in at a certain specialized field for a prolonged period of time based on the revealed aptitude in mid and high positions. This turns out to be in line with the structure of the Career Development Program which is being introduced. The model-based analysis of this paper distinguishes this study from preceding ones conducted in the traditional framework of personnel management study. Practical measures to mitigate the problems of frequent job rotation include rotating within the area of specialty, narrowing the scope of transfer, and reinforcing the minimum tenure period. However, since the current frequent rotation is fundamentally attributable to the rank system based on seniority, the present civil service classification system needs to be converted into a position classification system in the long run.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.529-538
• /
• 2016

The simplified plate theory is presented for static and free vibration analysis of power-law(P) and sigmoid(S) Functionally Graded Materials(FGM) plates. This theory considers the parabolic distribution of the transverse shear stress, and satisfies the condition that requires the transverse shear stress to be zero on the upper and lower surfaces of the plate, without the shear correction factor. The simplified plate theory uses only four unknown variables and shares strong similarities with classical plate theory(CPT) in many aspects such as stress-resultant expressions, equation of motion and boundary conditions. The material properties of the plate are assumed to vary according to the power-law and sigmoid distributions of the volume fractions of the constituents. The Hamilton's principle is used to derive the equations of motion and Winkler-Pasternak elastic foundation model is employed. The results of static and dynamic responses for a simply supported FGM plate are calculated and a comparative analysis is carried out. The results of the comparative analysis with the solutions of references show relevant and accurate results for static and free vibration problems of FGM plates. Analytical solutions for the static and free vibration problems are presented so as to reveal the effects of the power law index, elastic foundation parameter, and side-to-thickness ratio.