• Journal of Korean Society of Steel Construction
• /
• v.21 no.1
• /
• pp.37-44
• /
• 2009

A truss deck system that has replaced the slab form conventional method has become widely used in the construction of reinforced concrete structures as well as steel structures. The current commercial products, however, have some problems. The discontinuity between the lattice wires on the joint of the bottom wire induces vierendeel behavior, which increases the deflection of the system. In this research, a new truss deck system with continuous lattice wires on the level of the bottom wire was developed to reduce the system's vierendeel behavior and to improve its deformation capacity. To investigate the system's structural behavior, an experimental test and an analysis were performed. The main parameters of the test and analysis were the longitudinal shape and spacing of the lattices. To simulate the loading condition in the construction field, uniform construction loads were directly applied on the deck plates of the analysis model and the test specimens. The results of such analysis and test revealed that the longitudinal shape of the lattice wires is a major factor affecting the structural behavior of a steel wire truss deck. Thus, continuous lattice wires could result in decreased vierendeel behavior in the steel wire truss deck. It was also found that the truss deck system with lattices spaced longer than in the conventional products could be effectively used without increasing the member stresses.

• Journal of Technology Innovation
• /
• v.20 no.3
• /
• pp.57-91
• /
• 2012

This paper investigates determinants of litigation success in the two distinctive types of patent litigations, ex-parte and inter-parte cases, which are brought in the process where a filed application becomes a valid patent right. We regress winning rates of patent applicants on the characteristics of firms, trials, patent lawyer, and patent itself, using a probit model with sample selections. The paper finds that the relative suit rate of a firm, time to be sued, changes of patent agents by applicants, and multiple agents among explanatory variables affect ex-parte reexamination and in-parte post-grant patent trials differently in the point of average marginal effects. These variables lower the probability of applicant's victory in the ex-parte cases, while they raise the probability in the inter-parte trials. However, the experience that agents represent applicants is a winning rate-increasing factor both in inter-parte and ex-parte reexamination, unexpectedly. This result cannot be applied to the entire domain of the variable, since sample selection effects are reflected in the result. The number of claim increases the winning probability of the applicant in the both types of patent litigations. This study has some limitations because it ignores the information on the legal person to which a patent agent belongs, and confined agent's experience to patent filing. We leave it future studies to investigate the effects of lawsuit experience of patent agent, and those of characteristics of the law firm to which individual patent lawyer is affiliated.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.6
• /
• pp.983-988
• /
• 2010

The present study aims to investigate a possible mechanism of electroacupuncture (EA) in the spinal dorsal horn that may underlie N-methyl-D-aspartate (NMDA) receptor-associated extracellular signal-regulated kinase (ERK) mitogen-activated protein kinase (MAPK) signaling pathways. The hot plate latency of the ipsilateral hindpaw of EA-treated rats was significantly decreased compared with complete Freund's adjuvant (CFA)-injected ones. The expressions of NR1 and NR2B subuint mRNA of NMDA receptor in the whole L4-5 segments are decreased by CFA treatment, but NR2B subunit was significantly recovered by EA treatment. When we detected the expression of ERK, there were no significant difference between normal and CFA-treated rats with EA or NMDA receptor antagonist MK801. But phosphorylated ERK expressions were markedly induced by CFA, but these inductions were significantly modulated by EA treatment. Although hosphorylation of ERK was also arrested by MK801, these inductions of CFA-injected rats was markedly inhibited only by co-treatment with EA and MK801. Phosphorylated cAMP response element-binding protein (CREB), ERK-related transcriptional factor, showed a significant increase in CFA-treated rats and this increase was slightly inhibited by EA and MK801 treatments. But immunoreaction for phosphorylated CREB were significantly increased by CFA treatment in the superficial laminae of the dorsal horn and these inductions were significantly arrested by co-treatment of EA and MK801. Consequently, the hyperalgesia induced by CFA are associated NMDA receptor and EA and MK801 may showed anti-hyperalgesia via same mechanism for inhibition of ERK and CREB phosphorylation in the dorsal horn.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.571-577
• /
• 2012

In this study, a small movable batch treatment system for dredging soil deposited in a rain water tube is proposed; further, a vacuum silo sorting separation device with a vacuum silo, first-stage sorting separator, and conveyor is designed. The vacuum silo sorting separation device also consists of a storage tank, transferring screw, vacuum gate, screen bar, screen bar cleaner, and vacuum discharging device. In view of the fact that the flow of drawn air in the storage tank is a major factor influencing the sorting separation performance, the optimum shape of the tank is determined by CFD flow analysis. In addition, by using CAE structure analysis, the safety of a storage tank made of boards is examined. The specifications of the vacuum silo sorting separation device are determined by conducting mechanical and dynamic simulations of the driving mechanism of the vacuum silo sorting separation device through 3D-CAD modeling. Following this study, we will design a drum-screen-type second sorter, a decanter-type dehydration device, and waste water tank and pump as a secondary device. Further, on the basis of this design, we will construct a prototype model and carry out a field test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1329-1335
• /
• 2011

On the basis of detailed 3D finite-element (FE) limit analyses, the plastic limit load solutions for pipes with slanted circumferential through-wall cracks (TWCs) subjected to axial tension, global bending, and internal pressure are reported. The FE model and analysis procedure employed in the present numerical study were validated by comparing the present FE results with existing solutions for plastic limit loads of pipes with idealized TWCs. For the quantification of the effect of slanted crack on plastic limit load, slant correction factors for calculating the plastic limit loads of pipes with slanted TWCs from pipes with idealized TWCs are newly proposed from extensive 3D FE calculations. These slant-correction factors are presented in tabulated form for practical ranges of geometry and for each set of loading conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.39.2-39.2
• /
• 2011

The new and renewable energy today has a great interest in all countries around the world. In special it has need more limit of the fossil fuel that needs of low carbon emission among the social necessary conditions. Recently, the high-rise building demand the structural safety, the economic feasibility and the functional design. The high-rise building spends enormous energy and it satisfied the design in solving energy requirements. The requirements of energy for the building depends on the partly form wind energy due to the cladding of the building that came from the surroundings of the high-rise building. In this study of the wind energy, the cladding of the building was assessed a tentative study. The wind energy obtains from several small wind powers that came from the building or the surrounding of the building. In making a cladding the wind energy forms with wind pressure by means of energy transformation methods. The assessment for the building cladding was surrounded of wind speed and wind pressure that was carried out as a result of numerical simulation of wind environment and wind pressure which is coefficient around the high-rise building with the computational fluid dynamics. In case of the obtained wind energy from the pressure of the building cladding was estimated by the simulation of CFD of the building. The wind energy at this case was calculated by energy transform methods: the wind pressure coefficients were obtained from the simulated model for wind environment using CFD as follow. The concept for the factor of $E_f$ was suggested in this study. $$C_p=\frac{P_{surface}}{0.5{\rho}V^{2ref}}$$ $$E_c=C_p{\cdot}E_f$$ Where $C_p$ is wind pressure coefficient from CFD, $E_f$ means energy transformation parameter from the principle of the conservation of energy and $E_c$ means energy from the building cladding. The other wind energy that is $E_p$ was assessed by wind power on the building or building surroundings. In this case the small wind power system was carried out for wind energy on the place with the building and it was simulated by computational fluid dynamics. Therefore the total wind energy in the building was calculated as the follows. $$E=E_c+E_p$$ The energy transformation, which is $E_f$ will need more research and estimation for various wind situation of the building. It is necessary for the assessment to make a comparative study about the wind tunnel test or full scale test.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1076-1080
• /
• 2007

최근 국내에서는 하천변 생태계를 대상으로 생태구조 및 서식처 평가 등 많은 연구가 진행되었음에도 불구하고 생태적 변화를 예측하고 예측된 결과에 따라 생태복원 대책을 수립할 수 있는 연구는 현재까지 미흡하다고 볼 수 있으며, 이는 생태복원 연구에 있어 주요과제라고 할 수 있다. 이에 반해 유럽과 미국에서는 수문학적 서식처 조건에 따른 식생 반응 예측 등 수문생태 모형에 대한 연구가 꾸준히 이루어져 왔으며, 최근에는 습지, 홍수터 등을 대상으로 생태보전 복원분야에 널리 응용되고 있다. 본 연구에서는 국외의 수문생태모형 적용사례를 분석하여 국내 적용가능성 및 문제점에 대한 타당성을 제시하고자 하였다. 그 대상으로는 유역 내에 홍수량 분담을 위한 천변저류지를 적용하였으며, 의미상으로 홍수터(범람원), 습지 역시 해당 범위에 포함할 수 있다. 천변저류지는 홍수기와 비홍수기에 따라 활용 측면을 구분할 수 있으며, 이런 맥락에서 천변저류지의 수위변화는 식생 변화의 중요한 요소(factor)가 될 수 있다. 그 외 범람시기, 범람일수, 건조기간 등을 포함한 수문요소 역시 수문생태 모델의 예측 변수인 식생 성장에 영향을 미치게 된다. 이러한 수문/생태시스템의 상호관계를 활용하고 모형의 형태를 국내 식생에 대한 생리학적 특성에 맞게 변화시킬 수 있다면 국내 천변저류지에도 충분히 적용 가능할 것으로 판단된다. 또한 잠재적으로 식생 성장에 영향을 줄 수 있는 다양한 환경조건 예를 들면 영양물질, 토양구조, 토사 퇴적 등을 적용대상지 환경에 맞게 포함하거나 고려할 수 있다면 모형의 재현성을 더욱 높일 수 있을 것이다.의 기대효과를 가져올 수 있으리라 생각되며 분석된 인자들은 수달 서식지를 위한 하천정비의 기초자료에 유용할 것으로 보인다.따른 유량측정망을 구축하는 것이다.의 의사결정 지원 도구가 될 것이다. 따라서, 본 연구에서는 도시유역의 물순환 해석을 위한 일련의 과정, 즉 자료의 조사 및 취득에서부터 물순환 해석 모형을 이용한 정량적 현황파악, 물순환 개선 기법 및 평가를 수행함에 있어 주요 착안점 및 실무에서의 기술적 가이드를 제공하고자 하였으며, 보다 세밀한 도시유역의 물순환 해석을 위하여 우리나라와 일본에서 적용이 활발한 물리적 기반의 분포형 모형(WEP, SHER, SWMM)의 적용사례를 통하여 국내 도시하천의 물순환 해석에 활용함에 있어서의 실질적인 적용절차 등을 제시하고자 하였다. 한다.호강유역의 급격한 수질개선을 알 수 있다.世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.837-844
• /
• 2017

Generally, V/C ratio in uninterrupted traffic flow and average travel speed in interrupted traffic flow are utilized as measure of effect for assessing operational situation of roads. The set of road conditions and traffic conditions are considered to be major variables for assessing operational situation in the traffic flow. However, weather conditions such as rainfall also affect the operational situation of roads. The studies reflected by the rainy situation are conducted in the uninterrupted flow, but the related studies are insufficient in the interrupted flow. In this study, the modification factors during rainfall in the interrupted flow were suggested, and the factors could be used when calculating the average travel speed during rainfall in the interrupted flow. By utilizing the data that were investigated in the same road and traffic conditions and the different weather conditions (rainy day or clear day), the modification factors were founded on regression analysis of the travel speed during rainfall as a dependent variable. Modification factors was suggested in dividing peak time, non-peak time, and whole period. Based on this study, the modification factors can be used to complementing the average travel speed model for assessing the operational situation of urban streets during rainfall.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.407-408
• /
• 2011

Natural boron consists of two stable isotopes 10B and 11B with natural abundance of 18.8 atom percent of 10B and 81.2 atom percent of 11B. The thermal neutron absorption cross-section for 10B and 11B are 3837 barn and 0.005 barn respectively. 10B enriched specific compounds are used for control rods and as a reactor coolant additives. In this work 2 methods for boron enrichment were analysed: 1) Gas irradiation in static conditions. Dissociation occurs due to multiphoton absorption by specific isotopes in appropriately tuned laser field. IR shifted laser pulses are usually used in combination with increasing the laser intensity also improves selectivity up to some degree. In order to prevent recombination of dissociated molecules BCl3 is mixed with H2S 2) SILARC method. Advantages of this method: a) Gas cooling is helpful to split and shrink boron isotopes absorption bands. In order to achieve better selectivity BCl3 gas has to be substantially rarefied (~0.01%-5%) in mixture with carrier gas. b) Laser intensity is lower than in the first method. Some preliminary calculations of dissociation and recombination with carrier gas molecules energetics for both methods will be demonstrated Boron separation in SILARC method can be represented as multistage process: 1) Mixture of BCl3 with carrier gas is putted in reservoir 2) Gas overcooling due to expansion through Laval nozzle 3) IR multiphoton absorption by gas irradiated by specifically tuned laser field with subsequent gradual gas condensation in outlet chamber It is planned to develop software which includes these stages. This software will rely on the following available software based on quantum molecular dynamics in external quantized field: 1) WavePacket: Each particle is treated semiclassicaly based on Wigner transform method 2) Turbomole: It is based on local density methods like density of functional methods (DFT) and its improvement- coupled clusters approach (CC) to take into account quantum correlation. These models will be used to extract information concerning kinetic coefficients, and their dependence on applied external field. Information on radiative corrections to equation of state induced by laser field which take into account possible phase transition (or crossover?) can be also revealed. This mixed phase equation of state with quantum corrections will be further used in hydrodynamical simulations. Moreover results of these hydrodynamical simulations can be compared with results of CFD calculations. The first reasonable question to ask before starting the CFD simulations is whether turbulent effects are significant or not, and how to model turbulence? The questions of laser beam parameters and outlet chamber geometry which are most optimal to make all gas volume irradiated is also discussed. Relationship between enrichment factor and stagnation pressure and temperature based on experimental data is also reported.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.3
• /
• pp.187-192
• /
• 1996

The matrix tablet containing sodium alginate and $CaHPO_4$ can release drugs in a controlled fashion from hydrogel with gelling and swelling due to their interaction as water penetrates the matrices of the tablet. The purpose of this study was to evaluate release characteristics of the matrix tablet varying the amount of sodium alginate, $CaHPO_4$ and other excipients such as chitosan, hydroxypropyl methylcellulose (HPMC) and $Eudragit^{\circledR}$ RS100 in the simulated gastric and intestinal fluid. The practically soluble ibuprofen was used as a model drug. The release profiles of matrix tablet in the gastric fluid as a function of sodium alginate/$CaHPO_4$ ratio was not pronounced because of low solubility of drug and stability of alginate matrices. However, release rate of drug from the matrix tablet in the intestinal fluid was largely changed when sodium alginate/$CaHPO_4$ ratio was increased, suggesting that the ratio of sodium alginate/$CaHPO_4$ was an important factor to control the gelling and swelling of the matrix tablet. The incorporation of other excipients into the matrix tablet also influenced the release rate of drug. The chitosan and HPMC decreased the release rate of drug. No release of drug was occurred when $Eudragit^{\circledR}$ RS100 was added into the tablet. The retarded release of matrix tablet when excipients were added resulted from the hindrance of swelling and gelling of the matrix tablet containing sodium alginate and $CaHPO_4$. The hardness and bulk density of the matrix tablet was not correlated with release rate of drug in the study. From these findings, the ratio of sodium alginate and $CaHPO_4$ in the matrix tablet in addition to incorporation of excipients could be very important to control the release rate of drug in dosage form design.