• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.485-516
• /
• 2011

Republic of Korea is small nation that is comprised of 0.7% of the world population and occupying just 0.07% of the world territory. Despite this, Republic of Korea once again proved herself to be as the world's major economic powerhouse by becoming the world's 7th largest exporter in 2010. However, the reality is that Republic of Korea is still significantly concerned about the volatile economic nature and anxiety that is spread across the globe since the global depression that began at the end of 2008 and the financial crisis that has been threatening the Euro-Zone recently. This has resulted in the nation reaching the limitation in significant economic growth and limited creation of jobs within the nation and due to such circumstances, the nation is becoming more aware of the fact that she needs to pay more attention on the service sector and service exports if she was to see a more positive economic outlook in the upcoming future. This research is aimed to analyse the cost that is associated with the service export sector, by examining a number of enterprises in relation to the MICE(Meeting Incentives Convention Exhibition) industry which certainly has both direct and indirect influences on the service exports of the nation Further, the prime goal of the research is to encourage the SMEs of Korea, who have substandard experience associated to foreign exports, to intensify and increase service exports and also the goal extends to the degree to suggest appropriate assistance measures to aid these enterprises to achieve such goals. This research is fundamentally designed and based on the literature research associated with the MICE industry and also, this research is premeditated through the analysis of the case of exports to Vietnam. As the result of research, it has been found out that SMEs in the MICE industry and those of in service export sector are reluctant or even feel insecure to attempt any kind of export of their services mainly due to; the lack of foreign market information and also the lack of experience associated with service exports. Furthermore, it has also been revealed that the difficulty to estimate the validity and profitability of service the export is a significant factor withholding those enterprises from attempting any service export to the foreign markets. Henceforth, in order to aid and stimulate service export to the foreign markets by these SMEs (including those in association with the MICE industry), it is imperative to prepare an one-stop service export assistance program which would provide the information associated with marketing, law and legislation, taxation system and financial area in regard to the global markets.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.291-299
• /
• 2011

Purpose: This study was designed to measure patient satisfaction and oral health-related quality of life and to assess an association between patients' satisfaction and oral health-related quality of life after implant surgery by using structural equation modeling. Materials and methods: A total of 257 participants who visited 6 dental clinics located in Daegu city for the purpose of implant treatment participated in this study. Six months after completion of implant surgery, the patients' satisfaction and oral health-related quality of life were surveyed. The effect of factors associated with patients' satisfaction such as functions and aesthetics, maintenance and cost on oral health-related quality of life after implant surgery was analyzed using AMOS 4.0. Results: Oral health-related quality of life was improved in all dimensions of OHIP-14 after implant surgery. Functions and aesthetics as well as maintenance had a significant effect on oral health-related quality of life (P<.05), while cost was not a critical factor influencing oral health-related quality of life. Conclusion: High satisfaction with functional aspects and maintenance aspects significantly affected good quality of life. The result of this study supported the fact that education and management for patients after implant therapy were positively related to good quality of life based on a theoretical model.

• The Journal of Small Business Innovation
• /
• v.20 no.1
• /
• pp.35-46
• /
• 2017

The purpose of this study is to obtain the implications for establishing a marketing strategy for retailers by analyzing whether the consumer's preference for products (food) is influenced by on-line, off-line, and omni-channel preferences. The research model consisted of the effects of consumers' food selection characteristics on business preference and omni channel preference. The results of analysis based on 477 questionnaires are summarized as follows. First, food purchasing characteristics that utilize the seven characteristics of (1) freshness of food, (2) taste, (3) quality and safety, (4) tasting, (5) food function and information, (6) country of origin, and (7) brand loyalty, has various effects on types of business preference, omni-channel preference. The adopted hypotheses were selected in order of brand loyalty (5 times), freshness (3 times), tasting (3 times), and origin (1 time). The selective attributes on foods are: (1) what kind of brand, (2) how good the freshness is, (3) tasting. (4) The country of origin is to be compressed. Actually consumers seem to utilize only the core selective factors that are appropriate to the characteristics of the distribution channel rather than all of them in the shopping of the food, and there is three characteristics on Convenience Store and only one or two factors in the other types of business. Second, in the analysis of the omni-channel preference analysis, food selection characteristics has been shown to have a limited effect, which is attributed to the fact that the consumer has not yet understood the concept of omni channel. Third, the results of this study suggest that there is a need to reflect the selection characteristics of foods that have diverse influences by business type in the marketing strategies. Because consumers make reasonable consumption to use both on-line and off-line simultaneously, consumers who use Omni Channel focus on quality and safety of food, identify products through tasting, pursue brands that can trust anywhere. Customers who pursue rationality will have a high preference for using Omni Channel. Product choice characteristic has significant effect on omni-channel preference. For a few years, omni-channel strategy of retailers meets with a difficulty. This study make a first attempt to study omni-channel preference changing retailing paradigm.

• Child Health Nursing Research
• /
• v.2 no.2
• /
• pp.45-57
• /
• 1996

A serious disease in a family influences the entire family member given the fact that the members closely interact with each other. Especially in terms of pediatric nursing, study on family gains importance as the need to care of families whose children with developmental disabilities and chronic disease This study was done based on The Resiliency Model of Family Adjustment and Adaptation(McCubbin, 1991) is intended to examine the stress of parents whose children suffer from cleft lip or /and cleft palate. It also helps them to cope with the stress and analyze the relationship between the stress and coping This study used Family Inventory of Life Events and Changes (FILE) and Coping Health Inventory for Parents(CHIP) for measuring family stress and coping. The two instruments are revised to fit the social and cultural environment of Korean culture. Data collection was done from April 18, 1996 to May 18, 1996 at 8 University medical centers located in Seoul. Those who answered questionnaires were 84 parents whose children have cleft lip or /and cleft palate. SPSS PC+ was used to analyze the data collotted. Programs used for data analysis were t-test, ANOVA, Pearson correlation coefficient. The study is summarized as follows .1. The average score of family stress is 10.46(percentage of the full score 24.90) and 'finance and business strains'(3.25), and 'intrafamily strains'(2.65) ranked the highest. The average score of family's coping is 1.93, which is close to the answer of' moderately helpful' and they are measured to put their utmost efforts to' intergration and cooperation of family and optimistic definition on the situation'. 2. There is no significant statistical correlation between the family stress and coping. 3. Mothers show more stress than fathers in the parts of 'illness and family care strains' and 'losses'(t〓-2.34, t〓-2.32, p<.05). 4. Fathers show more willingness to cope with the stress than mothers do in the parts of' seeking social support','self-esteem','emotional comfort' 5. Mothers are more stress than fathers in the parts of family stress and its coping with it by usual traits(t〓-2.78, p<.05). Parents with religion are measured to cope more willingly than those who are not 6. Income of a family shows positive correlationship with family coping (r〓.28, p<.05). The study shows that gender difference is significant variable in studying on family stress and coping. Mothers get more stress than fathers, which has much to do with the fact that they are in charge of raising children and keeping houseworks. Accordingly, managing family crisis and its survival can be induced by giving support for the mothers, studying fathers including the rest of the family members and giving nursing care and arbitration ; religious background is also considered to be one of the important factors in family stress , judging from the relationship between family income and family's coping, caring given to suffering children is needed on societal levels. The above considerations bring up the need to have a longitudinal study of children with congenital anomaly including cleft lip or /and cleft palate and their families about family stress and coping. Resiliency programs on family system and their effectiveness and the relationship between the enlarged families with social and cultural values reflecting Korean tradition are also needed to be studied.

• The Journal of Society for e-Business Studies
• /
• v.19 no.4
• /
• pp.231-249
• /
• 2014

We define $21^{st}$ century as an amalgamation of globalization and localization, or Glocalization. Additionally, due to the increasing supply of smart phones and wide usage of social networking services, the ability to utilize such global and regional information has increased a coperation's competitiveness in its market, and even the business models have evolved from the conventional "production and distribution" to E-commerce, through which either a direct or a non-direct transaction is possible. My hypothesis is that the ability to adapt to this trend is possible through transfer of learning, and consequently, this will have an impact on company's performance. Thus, this thesis analyzes the mid- to the long-term impact of such ability and environmental factors on the performance and technology innovation of Korean companies in China. Ultimately, this study intends to engender a basic foundation for a corporation's management strategy in China. Finally this research focuses on those Korean companies in China only and on the proof of influential factors' impact on technological innovation and technological innovation's impact on those corporations' future performances. Section I is an abstract and section II, the case examines the uniqueness and current status of Korean companies in China identifies the concept and the definition of influential factors such as education-orientation, technological innovation, and performance, and then scrutinizes each factors through a closer look at their past researches. Section III explains the thesis model, the survey's method and target, the thesis, variable factors, the content, and the method of analysis. In section IV, the thesis is proved based on the outcome of the survey. The result in Section V highlights the high comprehension of technological innovation: both education-orientation and technological innovation prove to have a positive (+) correlation with the performance. The vision on education orientation proves to have a positive (+) influence on technological innovation. The vision on education-orientation and technological innovation prove to have a positive (+) influence individually on company's performance.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.39-46
• /
• 2012

Recently, stratigraphic reservoirs are getting more attention than structural reservoirs which have mostly developed. However, recognizing stratigraphic thin gas reservoirs in a stacked section is usually difficult because of tuning effects. Moreover, if the reflections from the brine-saturated region of a thin layer have the same polarity with those from the gas-saturated region, we could not easily identify the gas reservoir with conventional data processing technique. In this study, we introduced a way to delineate the gas-saturated region in a thin layer reservoir using a spectral decomposition method. First of all, amplitude spectrum with the variation of the frequency and the incident angle was investigated for the medium which represents property of Class 3, Class 1 or Class 4 AVO response. The results show that the maximum difference in the amplitude spectra between brine and gas-saturated thin layers occurs around the peak frequency independent of the incident angle and the type of AVO responses. In addition, the amplitude spectra of the gas-saturated zone are greater than those of brine-saturated one in Class 3 and Class 4 at the peak frequency while those of phenomenon occur oppositely in Class 1. Based on the results, we applied spectral decomposition method to the stacked section in order to distinguish the gas-saturated zone from the brine-saturated zone in a thin layer reservoir. To verify our new method, we constructed a thin-layer velocity model which contains both gas and brine-saturated zones which have the same reflection polarities. As a result, in the spectral decomposed sections near the peak frequency obtained by Wigner-Ville Distribution (WVD), we could identify the difference between reflections from gas- and brinesaturated region in the thin layer reservoir, which was hardly distinguishable in the stacked section.

• Journal of Korea Water Resources Association
• /
• v.53 no.9
• /
• pp.661-670
• /
• 2020

The water supply system has a wider installation range and various components of it than other infrastructure, making it difficult to secure stability against earthquakes. Therefore, it is necessary to develop methods for evaluating the seismic performance of water supply systems. Ground Motion Prediction Equation (GMPE) is used to evaluate the seismic performance (e.g, failure probability) for water supply facilities such as pump, water tank, and pipes. GMPE is calculated considering the independent variables such as the magnitude of the earthquake and the ground motion such as PGV (Peak Ground Velocity) and PGA (Peak Ground Acceleration). Since the large magnitude earthquake data has not accumulated much to date in Korea, this study tried to select a suitable GMPE for the domestic earthquake simulation by using the earthquake data measured in Korea. To this end, GMPE formula is calculated based on the existing domestic earthquake and presented the results. In the future, it is expected that the evaluation will be more appropriate if the determined GMPE is used when evaluating the seismic performance of domestic waterworks. Appropriate GMPE can be directly used to evaluate hydraulic seismic performance of water supply networks. In other words, it is possible to quantify the damage rate of a pipeline during an earthquake through linkage with the pipe failure probability model, and it is possible to derive more reasonable results when estimating the water outage or low-pressure area due to pipe damages. Finally, the quantifying result of the seismic performance can be used as a design criteria for preparing an optimal restoration plan and proactive seismic design of pipe networks to minimize the damage in the event of an earthquake.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.51-79
• /
• 1990

Research on technical efficiency, an important dimension of market performance, had received little attention until recently by most industrial organization empiricists, the reason being that traditional microeconomic theory simply assumed away any form of inefficiency in production. Recently, however, an increasing number of research efforts have been conducted to answer questions such as: To what extent do technical ineffciencies exist in the production activities of firms and plants? What are the factors accounting for the level of inefficiency found and those explaining the interindustry difference in technical inefficiency? Are there any significant international differences in the levels of technical efficiency and, if so, how can we reconcile these results with the observed pattern of international trade, etc? As the first in a series of studies on the technical efficiency of Korea's manufacturing industries, this paper attempts to answer some of these questions. Since the estimation of technical efficiency requires the use of plant-level data for each of the five-digit KSIC industries available from the Census of Manufactures, one may consture the findings of this paper as empirical evidence of technical efficiency in Korea's manufacturing industries at the most disaggregated level. We start by clarifying the relationship among the various concepts of efficiency-allocative effciency, factor-price efficiency, technical efficiency, Leibenstein's X-efficiency, and scale efficiency. It then becomes clear that unless certain ceteris paribus assumptions are satisfied, our estimates of technical inefficiency are in fact related to factor price inefficiency as well. The empirical model employed is, what is called, a stochastic frontier production function which divides the stochastic term into two different components-one with a symmetric distribution for pure white noise and the other for technical inefficiency with an asymmetric distribution. A translog production function is assumed for the functional relationship between inputs and output, and was estimated by the corrected ordinary least squares method. The second and third sample moments of the regression residuals are then used to yield estimates of four different types of measures for technical (in) efficiency. The entire range of manufacturing industries can be divided into two groups, depending on whether or not the distribution of estimated regression residuals allows a successful estimation of technical efficiency. The regression equation employing value added as the dependent variable gives a greater number of "successful" industries than the one using gross output. The correlation among estimates of the different measures of efficiency appears to be high, while the estimates of efficiency based on different regression equations seem almost uncorrelated. Thus, in the subsequent analysis of the determinants of interindustry variations in technical efficiency, the choice of the regression equation in the previous stage will affect the outcome significantly.

• 대한공업교육학회지
• /
• v.41 no.1
• /
• pp.68-87
• /
• 2016

This research conducted a survey for total 166 teachers of schools so as to analyze validity and satisfaction for performance objectives of SMB administration subsidy the HRDP and the CEP in Specialized High School. The results of research are as follows. First, teachers recognize that purpose of HRDP is to expand employment of specialized high school and provide human resource of SMB. And, they recognize that HRDP is important to improve school outcomes and makes a positive effect on the improvement of school outcomes. Second, teachers recognize that objectives of HRDP are improvement of student's understanding for SMB, improvement of teacher's understanding for SMB, improvement of SMB's understanding of school, cultivation of student's occupational view, systematization of career guiding program based on employment process, strengthening of industry-academia cooperation education, improvement of the level of student's skill, fulfillment of workplace experience and practice focusing workplace learning, training of customized human resource for SMB, improvement of student's adaptation to the workplace, improvement of employment rate for SMB, expansion of job opportunities for students with SMB, preparation of the base of connection between school and SMB, publicity of school, expansion of opportunities to cooperate between SMB and school, establishment of cooperative system among industrial association and school, introduction and operation of the employment connective model for joint education and employment, strengthening of field professionalism of teachers. However, satisfaction for the achievement of objectives of HRDP except for strengthening of industry-academia cooperation education and improvement of employment rate for SMB is relatively lower than the validity. Third, teachers in charge of human resource training business of middle and small sized company's specialized high school recognize that objectives of CEP are expansion of job opportunities for students with SMB, excavation of good-quality SMB, expansion of opportunities to cooperate between SMB and school, fulfillment of workplace learning, improvement of student's major foundation and in-depth skill, improvement of literacy, math, teamwork and communication abilities for students' job performance, improvement of student's working attitude and student's proper career exploration decision. However, satisfaction for achievement of objectives of CEP is relatively lower than the validity.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.