• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.121-142
• /
• 2006

Collecting materials for study on teaching efficiency and satisfaction of clinical training, it changes. Dental technology's educational procedure to many ways of a prospect. In a circumstance that needed higher level of education, this study is aimed on realizing an importance of clinical training through the various materials that previously carried out and offering basic knowledge to take better clinical training for the students. Study results below 1. This Investigation conducted on 123 of sophomores(70.3%) and 52 of juniors(29.7%) who have been taken clinical training, and men's proportion(51.45%)is a bit higher than girls(48.6%). The 64% of respondents taken largest proportion were 20 to 24 years old. As 67.9% of respondents attended daytime school and 30.3% of them attended nighttime one, their school time shows a little difference. In a question about relation ship, one answered "Harmonious" took largest proportion by 72.6% during training, and about the degree of satisfaction of campus life who answered "normal" were the most with 59.4%. 2. About the reason choosing dental technology as a major, 41.1% taken the most answered "due to the specialized job", "Getting job easily" was second with 26.9%, and third was "recommended from around" with 18.3%. 50.3% of the respondents answered "normal" about the Satisfaction of their major, student marked in grade "B" most with 51.4% 3. In a investigation result about clinical training statues and preference, most(72.6%) choose place less than 10 for clinical training, and 60.6% of them resided own home. About their commuting time from home to training place, 44% was under 30min, 40% took time 30-60min. It shows students prefer shotter distance in terms of choosing training place. 4. Each part manager took large proportion as a clinical trainer with 33.7%, Training curriculum reform and developing method were most answer as a improvement measure after completing training with 30%. 5. The average of total score about clinical training was 3.15 of 5. In the detailed question, 'satisfaction of clinical training' got 3.38 as a highest score, the lowest score was 2.86 that is about satisfaction of clinical training period. The average score about efficiency of study was 2.86 and in detailed question, 'a Role model' got 3.26 as a highest score and participation of student got 3.05 as a lowest score. 6. The result of T-test to see the difference of the satisfaction according to the general character and clinic training condition between teaching efficiency is that the degree of satisfaction of clinical training showed statistical significance only in the degree of satisfaction of campus life(p<0.05), and teaching efficiency has a statistical significance with their age, grade, and satisfaction of campus life (p<0.05). 7. The relation between of teaching efficiency of clinical training and satisfaction of clinical training of dental technologic student has a statistical meaning in significance leveler 0.01. Now, therefore we suggest following based on these result. 1. To elevate satisfaction of clinical training, it agentry needs development of consistent clinical training curriculum. 2. To grasp the satisfaction and requirement, in needs to measure anxiousness and satisfactory degree after completing training 3. To train efficiently and evaluate efficiency over the teaching activities, it needs to develop measuring tools for teaching efficiency in terms of teacher's important rules in a clinical training. 4. Strengthen the relations with the study developing and managing curriculum gathering theoretical knowledge and practice. And make an effort to apply to their students. 5. Let the trainee take a class setting a belief, sense of value, function and obtain behavior by making the students comfort over clinical training as increasing teaching efficiency.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.493-502
• /
• 2012

Objectives: The purpose of this study is to investigate the mass concentration of nanoparticles and understand the characteristics of elements of heavy metal concentrations within nanoparticles in the air using Micro-Orifice Uniform Deposit Impactor Model-110 (MOUDI-110), based on indoor and outdoor air. Methods: This Study sampled nanoparticles using MOUDI-110 indoors (office) and outdoors at S University in Asan, Korea in order to reveal the concentration of nanoparticles in the air. Sampling continued for nine months (10 times indoors and 14 times outdoors) from March to November 2010. Mass concentrations of nanoparticle and concentrations of heavy metals (Al, Mn, Zn, Ni, Cu, Cr, Pb) were analyzed. Results: Indoors, geometric mean concentration of nanoparticles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 0.929 ${\mu}g/m^3$ and 1.002 ${\mu}g/m^3$, respectively. On the other hand, the levels were lower outdoors with 0.819 ${\mu}g/m^3$ and 0.597 ${\mu}g/m^3$. Mann-Whitney U tests showed that the difference between the indoors and the outdoors was statistically meaningful in terms of particles of 0.056 ${\mu}m$ or less (p<0.05) in size. These results are possibly influenced by the use of printers and duplicators as the factor that increased the concentration of nanoparticles. In seasonal concentration distribution, the level was higher during the summer compared to in the autumn. Those of 0.056 ${\mu}m$ or less in size presented a statistically meaningful difference during the summer (p<0.05). These results may be influenced by photochemical event as the factor that makes the levels high. Regarding zinc, among the other heavy metals, the fine particles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 1.699 $ng/m^3$ and 1.189 $ng/m^3$ in the outdoors. In the indoors, the levels were lower, with 0.745 $ng/m^3$ and 0.617 $ng/m^3$. Cr and Ni at the size of 0.056 ${\mu}m$ or less, both of which have been known to pose severe health effects, recorded higher concentrations indoors with 0.736 $ng/m^3$ and 0.177 $ng/m^3$, compared to 0.444 $ng/m^3$ and 0.091 $ng/m^3$ outdoors. By season, Zn, Ni, Cu and Pb posted a high level of indoor concentration during the fall. As for Cr, the level of concentration indoors was higher than outdoors both during the summer and the autumn. Conclusion: This study indicates the result of an examination of nano-sized particles and heavy metal concentrations. It will provide useful data for the determination of basic nanoparticle standards in the future.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.375-390
• /
• 2009

Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.360-367
• /
• 2015

The present study investigated the habitats of Korean fir trees (Abies koreana E. H. Wilson) on Mt. Baekwun (Baekwun-san), determined the current distribution, quantified the contribution of biological and non-biological environmental factors affecting the distribution, derived actual and potential habitats, presented a plan for the establishment of protected areas, applied RCP 8.5 climate change scenario to analyze the effects of climate change on the future distribution of Korean fir trees, and predicted future potential habitats. According to the results of the study, 3,325 Korean fir trees (DBH >= 2.5 cm) inhabited Mt. Baekwun, and their distribution area was approximately 150 ha. Populations of Korean fir trees were confirmed to exist at an altitude of 900 m above sea level and were distributed up to 1,200 m. Based on potential distribution, areas appropriate for habitation by Korean fir trees were analyzed to be 450 ha, three times the current distribution area, with a focus on Sang Peak (Sang-bong), Eokbul Peak (Eokbul-bong), Ddari Peak (Ddari-bong), and Dosol Peak (Dosol-bong). The forest stands near Sang Peak, the main peak, were evaluated as those with the most appropriate potential for the habitation of Korean fir trees, and populations of the trees tended to prefer the northern slope rather than the southern slope. When climate change scenario RCP 8.5 was applied and future potential distribution was analyzed, the habitats were expected to decrease in area to 20 ha by 2050, with a focus on Sang Peak, and areas appropriate for habitation were predicted not to exist by 2080. Judging from such results, as global warming accelerates, the habitats of Korean fir trees are clearly expected to move from lowlands to highlands.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.6
• /
• pp.884-892
• /
• 2014

The purpose of this study was to investigate the drying characteristics and drying models of Ainsliaea acerifolia Sch. Bip. using far-infrared thin layer drying. Far-infrared thin layer drying test on Ainsliaea acerifolia Sch. Bip. was conducted at two air velocities of 0.6 and 0.8 m/sec, as well as three drying temperatures of 40, 45, and $50^{\circ}C$ respectively. The drying models were estimated using coefficient of determination and root mean square error. Drying characteristics were analyzed based on factors such as drying rate, leaf color changes, antioxidant activity, and contents of polyphenolics and flavonoids. The results revealed that increases in drying temperature and air velocity caused a reduction in drying time. The Thompson model was considered suitable for thin layer drying using far-infrared radiation for Ainsliaea accerifolia Sch. Bip. Greenness and yellowness values decreased and lightness values increased after far-infrared thin layer drying, and the color difference (${\Delta}E$) values at $40^{\circ}C$ were higher than those at $45^{\circ}C$ and $50^{\circ}C$. The antioxidant properties of Ainsliaea acerifolia Sch. Bip. decreased under all far-infrared thin layer drying conditions, and the highest polyphenolic content (37.9 mg/g), flavonoid content (22.7 mg/g), DPPH radical scavenging activity (32.5), and ABTS radical scavenging activity (31.1) were observed at a drying temperature of $40^{\circ}C$ with an air velocity of 0.8 m/sec.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1358-1365
• /
• 2016

The purpose of this study was to verify the drying characteristics of seasoned red pepper sauce and establish optimal drying conditions for far infrared drying of seasoned red pepper sauce. Seasoned red pepper sauce, which was dried by heated air, was used. One kg of seasoned red pepper was spread at thicknesses of 10 and 20 mm and dried by a far infrared dryer until a final moisture content of $15{\pm}0.5%$. The far infrared dryer conditions were air velocity of 0.6, 0.8 m/s and drying temperatures of 60, 70, and $80^{\circ}C$. The drying models were estimated using a determination coefficient and root mean square error. Drying characteristics were analyzed based on factors such as drying rate, color changes, content of capsaicinoids, and energy consumption. The results can be summarized as follows. The drying rate (that is, drying time) tended to be reduced as temperature and air velocity for drying increased. The Page and Henderson models were suitable for drying of seasoned red pepper sauce by a far infrared dryer. Redness decreased after far infrared drying under all experimental conditions. The color difference was 18.18 under the following conditions: thickness 20 mm, temperature $70^{\circ}C$, and air velocity 0.8 m/s. This value was slightly higher than those under other far infrared drying conditions. The capsaicinoid properties of seasoned red pepper sauce decreased under all far infrared drying conditions. The highest capsaicin (19.91 mg/100 g) and dihydrocapsaicin (12.87 mg/100 g) contents were observed at a thickness of 10 mm, temperature of $80^{\circ}C$, and air velocity of 0.8 m/s. Energy consumption decreased with higher temperature, slower air velocity, and thinner seasoned red pepper sauce.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1249-1256
• /
• 2016

Black ginseng (BG) obtained by a 9-fold steaming process of Panax ginseng has been reported to have anti-oxidative, anti-obesity, and anti-diabetes effects. The current study evaluated the protective effect of BG by steaming time in an HCl/ethanol-induced acute gastritis model. BG was divided into four samples according to steaming-drying processing (Gin1, Gin3, Gin6, and BG). High performance liquid chromatography analysis, free radical scavenging activity, and total phenol and flavonoid contents were examined in ginseng and four BG samples. Compared with ginseng, BG showed a stronger radical scavenging effect and higher contents of total phenol and flavonoids. To evaluate the anti-gastritic effect of BG, mice were distributed into five groups: normal mice (N), acute gastritic mice with distilled water (CON), acute gastritic mice with 100 mg/kg of ginseng (Gin0), acute gastritic mice with 100 mg/kg of BG (BG), and acute gastritic mice with 10 mg/kg of sucralfate (SC). After 1 hour of pre-treatment with water, extracts (Gin0 and BG), or drug (SC), experimental groups except for N were orally administered 0.5 mL of 150 mM HCl/60% ethanol (v/v) mixture. Blood was collected 1 hour later from the heart, and gastric tissue was harvested. Reactive oxygen species (ROS) levels were measured in serum, and related protein expression was examined by Western blot assay. In HCl/ethanol-induced acute gastritic mice, treatment with ginseng or BG improved mucosal damage in the histological evaluation. The serum ROS level significantly decreased in the BG-treated group compared with the CON group. Furthermore, expression of inflammatory cytokines significantly decreased in the BG-treated group compared with the CON group. Based on these results, antioxidant and anti-gastritic activities of ginseng were enhanced by streaming-drying processing, in part due to an increase in biological active compounds.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.11
• /
• pp.1653-1663
• /
• 2016

Meat quality is a complex trait influenced by many factors, including genetics, nutrition, feeding environment, animal handling, and their interactions. To elucidate relevant factors affecting pork quality associated with oxidative stress and muscle development, we analyzed protein expression in high quality longissimus dorsi muscles (HQLD) and low quality longissimus dorsi muscles (LQLD) from Duroc pigs by liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based proteomic analysis. Between HQLD (n = 20) and LQLD (n = 20) Duroc pigs, 24 differentially expressed proteins were identified by LC-MS/MS. A total of 10 and 14 proteins were highly expressed in HQLD and LQLD, respectively. The 24 proteins have putative functions in the following seven categories: catalytic activity (31%), ATPase activity (19%), oxidoreductase activity (13%), cytoskeletal protein binding (13%), actin binding (12%), calcium ion binding (6%), and structural constituent of muscle (6%). Silver-stained image analysis revealed significant differential expression of lactate dehydrogenase A (LDHA) between HQLD and LQLD Duroc pigs. LDHA was subjected to in vitro study of myogenesis under oxidative stress conditions and LDH activity assay to verification its role in oxidative stress. No significant difference of mRNA expression level of LDHA was found between normal and oxidative stress condition. However, LDH activity was significantly higher under oxidative stress condition than at normal condition using in vitro model of myogenesis. The highly expressed LDHA was positively correlated with LQLD. Moreover, LDHA activity increased by oxidative stress was reduced by antioxidant resveratrol. This paper emphasizes the importance of differential expression patterns of proteins and their interaction for the development of meat quality traits. Our proteome data provides valuable information on important factors which might aid in the regulation of muscle development and the improvement of meat quality in longissimus dorsi muscles of Duroc pigs under oxidative stress conditions.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.15-22
• /
• 2009

Adequate environment conditions with growth stage of potato were decided in a photoautotrophic micropropagation system using models. Total 20 day-period of growth were divided into three growth periods such as 6 (stage 1), 7(stage 2), and 7(stage 3) days. At the 1st stage, no significant differences were observed in the growth of potato plantlets at various photosynthetic photon flux density (PPFD) and $CO_2$ conditions. Considering damaged leaves, $80\;mmol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and ambient $CO_2$ level were adequate in this stage. At the 2nd stage, significant differences were partly observed in several growth characteristics including dry weight. Based on the dry matter model, over $240\;mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD was too high to cultivate potato plantlets at this stage due to the occurrence of damaged leaves. Considering both plant growth and energy efficiency, $160\;mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and $700\;mol{\cdot}mol^{-1}\;CO_2$ were selected for the adequate combination. At the 3rd stage, the biomass accumulation was significantly induced in potato plantlets under higher levels of PPFD and $CO_2$ concentration as suggested by increased fresh and dry weights. However, we could not find the saturated point with regard to dry matter due to continuous increase of dry mater even under maximum PPFD ($320\;mmol{\cdot}m^{-2}{\cdot}s^{-1})$. Thus, $320\;mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and $1800\;mol{\cdot}mol^{-1}\;CO_2$ were considered as the best choice at final stage in this study. In conclusion, even though the growth period of micropropagated potato plantlets was quite a short, favorable environmental conditions required at each growth stage were different. This technique could improve the growth of micropropagated plantlets compared to the conventional micropropagation and apply to other agriculturally important crops as well as potato in the future.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.131-154
• /
• 2013

New internet technologies have created a revolutionary new platform which allows consumers to make decision about product price and quality quickly and provides information about themselves through the transcript of online reviews. By expressing their feelings toward products or services on virtual opinion platforms, users extend their influence into cyberspace as electronic word-of-mouth (e-WOM). Existing research indicates that an impact of eWOM on the consumer decision process is influential. For both academic researchers and practitioners, investigating this phenomenon of information sharing in online website is essential given the increasing number of consumers using them as sources of purchase decisions. It is worthwhile to examine the extent to which opinion seekers are willing to accept and adopt online reviews and which factors encourage adoption. Discerning the most motivating aspects of information adoption in particular, could help electronic marketers better promote their brand and presence on the internet. The objectives of this study are to investigate how online WOM influences a persons' purchase decision by discovering which factors encourage information adoption. Especially focused on the self-efficacy, this research investigates how self-efficacy affects on information usefulness and adoption of online information. Although people are exposed to same review or comment about product or service, some accept the reviews while others do not. We notice that accepting online reviews mainly depends on the person's preference or personal characteristics. This study empirically examines this issue by using cognitive dissonance theory. Specifically, in the movie industry, we address few questions-is always positive WOM generating positive effect? What if the movie isn't the person's favorite genre? What if the person who is very self-assertive so doesn't take other's opinion easily? In these cases of cognitive dissonance, is always WOM generating same result? While many studies have focused on one direct of WOM which indicates positive (or negative) informative reviews or comments generate positive (or negative) results and more (or less) profits, this study investigates not only directional properties of WOM but also how people change their opinion towards product or service positive to negative, negative to positive through the online WOM. An experiment was conducted quantitatively by using a sample of 168 users who have experience within the online movie review site, 'Naver Movie'. Users were required to complete a survey regarding reviews and comments taken from the real movie page. The data reflected user's perceptions of online WOM information that determined users' adoption level. Analysis results provide empirical support for the proposed theoretical perspective. When user can't agree with the opinion of online WOM information, in other words, when cognitive dissonance between online WOM information and users' preference occurs, perceived self-efficacy significantly decreases customers' perception of usefulness. And this perception of usefulness plays an important role in determining users' intention to adopt online WOM information. Most of researches have been concentrated on characteristics of online WOM itself such as quality or vividness of information, credibility of source and direction of online WOM, etc. for describing effect of online WOM, but our results suggest that users' personal character (e.g., self-efficacy) plays decisive role for acceptance of online WOM information. Higher self-efficacy means lower possibility to accept the information that represents counter opinion because of cognitive dissonance, whereas the people that have lower self-efficacy are willing to accept the online WOM information as true and refer to purchase decision. This study suggests a model for understanding role of direction of online WOM information. Also, our result implicates the importance of online review supervision and personalized information service by confirming switching opinion negative to positive is more difficult than positive to negative through the online WOM information. This implication would help marketers to manage online reviews of their products or services.