• Journal of ILASS-Korea
• /
• v.3 no.3
• /
• pp.23-32
• /
• 1998

The effect of reentrant type bowl geometry on combustion characteristics was investigated in a D.I. diesel engine. The main factor was the aspect ratio (Bowl Diameter / Bowl Depth) of bowl of combustion chamber, and the cylinder pressure, engine performance and emissions of the engine using the 4 kinds of the combustion chamber were meadured. Also, the combustion characteristics compared of the experimented and the calculated values which is used by the Hiroyasu's combustion model. The results are as follows; The effect of $d_c/H$ on ignition delay period are small. The smoke is corerelated to the heat release of the premixed and the diffusion combustion, i.g, the smoke decreased by decreasing the premixed combustion or increasing the diffusion combustion on cumulative heat release. The premixed combustion process has more effect than the diffusion combustion on smoke. The formal tendency of $d_c/H$ on engine performance has not appear.

• Journal of Korean Critical Care Nursing
• /
• v.9 no.2
• /
• pp.13-25
• /
• 2016

Purpose: This study was conducted to identify changes in limb circumferences among patients admitted to the intensive care unit (ICU) and related factors. Methods: We conducted a prospective observational study with 27 patients from 3 ICUs at a university hospital located in B city of Korea, from September 1 to October 30, 2015. The circumferences of the left and right upper arms, thighs, and lower legs were measured on the first, third, fifth, and seventh days of ICU admission. Information on the related factors was collected from the medical records. The data were analyzed using a linear mixed model method. Results: The limbs circumferences significantly reduced from day 3, and the changes continued till day 7. These changes were related to the gender of the subjects, restraints application, use of steroids, and continuous renal replacement therapy. Conclusions: Based on the above results, it can be concluded that ICU-acquired weakness begins before the third day of admission. Thus, early mobilization protocols for ICU patients need to be developed and implemented in order to improve long-term outcomes.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.247-251
• /
• 2010

It is very difficult to understand and estimate the heat transfer and flow characteristics in the combustor, which is one of main components in the Auxiliary Power Unit (APU), because its flow filed has very complex structure. In this paper, specified is characteristics of injection and flow through different air goles in the liner, which consist of large circular holes film cooling holes, and tangential air swirl holes. The durability of the liner depends on whether the surface of the liner is exposed to the hot gas over 1000 $^{\circ}C$ of a temperature or net. It is proved that the locations of hot spots estimated from the calculation using CFD are matched well with that from the test. In this study, CFD simulations were performed to examine the heat transfer and temperature distributions in and about a liner wall with film cooling on the wall. This computational study is based on the ensemble average continuity, compressible Navier-Stokes, energy, and PDF combustion equations closed by the standard $k-{\varepsilon}$ turbulence model with standard wall functions for the gas phase and the Fourier equations for conduction in the solid phase.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.429-439
• /
• 2008

With a remote operated manipulator system, the situation at a remote site can be rendered through remote visualized image to the operator. Then the operator can quickly realize situations and control the slave manipulator by operating a master input device based on the information of the virtual image. In this study, the remote operator visual support system (ROVSS) was developed for viewing support of a remote operator to perform the remote task effectively. A visual support model based on virtual environment was also inserted and used to fulfill the need of this study. The framework for the system was created by Windows API based on PC and the library of 3D graphic simulation tool such as ENVISION. To realize this system, an operation test environment for a limited operating site was constructed by using experimental robot operation. A 3D virtual environment was designed to provide accurate information about the rotation of robot manipulator, the location and distance of operation tool through the real time synchronization. In order to show the efficiency of the visual support, we conducted the experiments by four methods such as the direct view, the camera view, the virtual view and camera view plus virtual view. The experimental results show that the method of camera view plus virtual view has about 30% more efficiency than the method of camera view.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.29-33
• /
• 1963

A new method determining the micro amount of cupferron spectrophotometrically was investigated and was considered on the various factors which affect on the method. The method was as follows; ferric alum solution was added in a suitably acidified solution of cupferron. After the precipitates of Fe(Ⅲ)-cupferrate were formed, they were extracted with chloroform and the absorbancy of the organic phase was measured by spectrophotometer, Beckmann Model B (1cm quartz cell). The stable maximum wavelength was 325 $m{\mu}$ at 3.0 to 5.6 of the optimum pH and it obeyed on Boer's law in the range of 5.76 ${\gamma}/ml$ to 74.80 ${\gamma}/ml$ of cupferron. The maximum wavelength was independent on pH, concentration of cupferron and of ferric alum. The absorbancy at 325 $m{\mu}$ was not affected by $SO_4^{--}$ and Ac, but was varied by $Cl^-$ and $NO_3^-$. Sulfuric acid and acetate buffer are preferred to the acid and buffer solution adjusting the pH. At higher acidity, however, the absorbancy was somewhat lowered because of the decomposition of cupferron, and at too high concentration of ferric alum, it was also decreased because of the difficulty in the extraction. By this method, it was able to determine cupferron quantitatively in the percent error of 1.18.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.3
• /
• pp.166-173
• /
• 2009

The reliability of hafnium oxide gate dielectrics incorporating lanthanum (La) is investigated. nMOSFETs with metal/La-doped high-k dielectric stack show lower $V_{th}$ and $I_{gate}$, which is attributed to the dipole formation at the high-k/$SiO_2$ interface. The reliability results well correlate with the dipole model. Due to lower trapping efficiency, the La-doping of the high-k gate stacks can provide better PBTI immunity, as well as lower charge trapping compared to the control HfSiO stacks. While the devices with La show better immunity to positive bias temperature instability (PBTI) under normal operating conditions, the threshold voltage shift (${\Delta}V_{th}$) at high field PBTI is significant. The results of a transconductance shift (${\Delta}G_m$) that traps are easily generated during high field stress because the La weakens atomic bonding in the interface layer.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.3
• /
• pp.713-726
• /
• 2016

This study were attempted to apply the HACCP system adopted in the dried anchovy workplace to ensure the hygiene safety of dried anchovy workplace. In this study, HACCP system procedures, including HACCP team organization, determination of critical control point(CCP), establishment of critical limits, mornitering and verification etc., were established using KFDA 12 procedures. To determine whether hazards were critical elements, we evaluated the likelihood and seriousness of each hazard element. The likelihood of residual microorganism and metal piece exceeding the acceptable limit in dried anchovy products were demonstrated to be a critical hazard element. Management of the boiling(CCP-1B) and metal detection(CCP-2P) were determined to be a critical control point. The standards for acceptable residual microorganism and metal piece were set based on relevant laws and regulations, and then the limits were adapted and established for the CCP. An HACCP plan applicable to dried anchovy workplace was established.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.349-354
• /
• 2004

As a transmitter sub-assembly in the XFP(10 Gb/s Small Form Factor Pluggable) transceiver module, a transmitter optical sub-assembly(TOSA) is designed, fabricated and characterized in view of electrical and thermal performances. For a low-cost and compact packaging TOSA, the bias-tee and the matching resistor are monolithically integrated on the AlN sub-mount and a newly designed coplanar waveguide is drawn in the TO-stem. All optoelectronic components packaged in the TOSA are modeled by the equivalent circuit, which helps to improve and characterize the TOSA performance. The fabricated TOSA shows the -3㏈ bandwidth as high as 11 GHz at an elevated temperature of 85$^{\circ}C$.

• Research in Community and Public Health Nursing
• /
• v.25 no.3
• /
• pp.217-224
• /
• 2014

Purpose: This study aimed to assess the levels of and relationships among health literacy, knowledge about diabetes, and self-care activities in the Korean low-income elderly with diabetes and to identify factors influencing the self-care activities of this vulnerable population. Methods: This study surveyed a total of 151 low-income elderly patients with diabetes registered at 16 Visiting Health Care Services in B City, Korea. Health literacy was measured with the Newest Vital Sign. Diabetes knowledge was measured with the Diabetes Knowledge Test. The Summary of Diabetes Self-care Activities Questionnaire was used to assess diabetes self-care activities. A stepwise multiple regression analysis was conducted to identify significant factors influencing diabetes self-care activities in these patients. Results: In the regression model, diabetes knowledge (${\beta}=.322$, p<.001), exercise (${\beta}=.337$, p<.001), and experiences of diabetes education (${\beta}=.241$, p=.001) were significantly associated with increased diabetes self-care activities in low-income elderly patients with diabetes when gender, education, health literacy, and subjective health state were controlled. Conclusion: To improve diabetes self-care activities in the low-income elderly with diabetes, it is important to develop a customized program considering their knowledge, exercise, and diabetes education experience.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.194-202
• /
• 2006

Using a multi-variable linear regression technique and SUR(seemingly unrelated regression) model, the demand functions of tractor, combine and rice transplanter were estimated. The demand was regarded as an annual supply of each machine and modeled as a function of 11 independent variables which reflect the actual farmer's income, actual prices of farm machines, previous supply, previous stock, actual amount of available subsidy, actual amount of available loan, arable land, import of farm machines and rice price. The actual amount of available loan affects most significantly the demand functions. The actual farmer's income, actual farmer's asset, loan coverage, and rice price affect the demand positively while prices of farm machines and import negatively. The annual demands of tractor, combine and rice transplanter estimated using the demand functions were also presented over the next 4 years.