• Title/Summary/Keyword: model B3

Search Result 3,811, Processing Time 0.033 seconds

Evaluation of the CNESTEN's TRIGA Mark II research reactor physical parameters with TRIPOLI-4® and MCNP

  • H. Ghninou;A. Gruel;A. Lyoussi;C. Reynard-Carette;C. El Younoussi;B. El Bakkari;Y. Boulaich
    • Nuclear Engineering and Technology
    • /
    • v.55 no.12
    • /
    • pp.4447-4464
    • /
    • 2023
  • This paper focuses on the development of a new computational model of the CNESTEN's TRIGA Mark II research reactor using the 3D continuous energy Monte-Carlo code TRIPOLI-4 (T4). This new model was developed to assess neutronic simulations and determine quantities of interest such as kinetic parameters of the reactor, control rods worth, power peaking factors and neutron flux distributions. This model is also a key tool used to accurately design new experiments in the TRIGA reactor, to analyze these experiments and to carry out sensitivity and uncertainty studies. The geometry and materials data, as part of the MCNP reference model, were used to build the T4 model. In this regard, the differences between the two models are mainly due to mathematical approaches of both codes. Indeed, the study presented in this article is divided into two parts: the first part deals with the development and the validation of the T4 model. The results obtained with the T4 model were compared to the existing MCNP reference model and to the experimental results from the Final Safety Analysis Report (FSAR). Different core configurations were investigated via simulations to test the computational model reliability in predicting the physical parameters of the reactor. As a fairly good agreement among the results was deduced, it seems reasonable to assume that the T4 model can accurately reproduce the MCNP calculated values. The second part of this study is devoted to the sensitivity and uncertainty (S/U) studies that were carried out to quantify the nuclear data uncertainty in the multiplication factor keff. For that purpose, the T4 model was used to calculate the sensitivity profiles of the keff to the nuclear data. The integrated-sensitivities were compared to the results obtained from the previous works that were carried out with MCNP and SCALE-6.2 simulation tools and differences of less than 5% were obtained for most of these quantities except for the C-graphite sensitivities. Moreover, the nuclear data uncertainties in the keff were derived using the COMAC-V2.1 covariance matrices library and the calculated sensitivities. The results have shown that the total nuclear data uncertainty in the keff is around 585 pcm using the COMAC-V2.1. This study also demonstrates that the contribution of zirconium isotopes to the nuclear data uncertainty in the keff is not negligible and should be taken into account when performing S/U analysis.

Analysis of Global Food Market and Food-Energy Price Links: Based on System Dynamics Approach

  • Kim, Gyu-Rim
    • Korean System Dynamics Review
    • /
    • v.10 no.3
    • /
    • pp.105-124
    • /
    • 2009
  • The situation of the global food markets has been being rapidly restructured and entering on a new phase by new dynamic and driving forces. The factors such as economic growth and income increase, high energy price, globalization, urbanization, and global climate change are transforming patterns of food consumption, production, and markets. The prices and markets of world food and energy are getting increasingly linked each other. Food and fuel are the global dilemma issues associated with the risk of diverting farmland or of consuming cereals for biofuel production in detriment of the cereals supply to the global food markets. An estimated 100 million tons of grain per year are being redirected from food to fuel. Therefore, the objectives of this study are as follows: Firstly, the study examines situations of the world food and energy resources, analyzes the trends of prices of the crude oil and biofuel, and formulates the food-energy links mechanism. Secondly, the study builds a simulation model, based on system dynamics approach, for not only analyzing the global cereals market and energy market but also forecasting the global production, consumption, and stock of those markets by 2030 in the future. The model of this study consists of four sectors, i.e., world population dynamics sector, global food market dynamics sector, global energy market dynamics sector, scenario sector of world economic growth and oil price.

  • PDF

Binding Model of Amentoflavone to Peroxisome Proliferator-Activated Receptor γ

  • Lee, Jee-Young;Kim, Jin-Kyoung;Lee, So-Jung;Lee, Eun-Jung;Shin, So-Young;Jin, Qinglong;Yoon, Do-Young;Woo, Eun-Rhan;Kim, Yang-Mee
    • Bulletin of the Korean Chemical Society
    • /
    • v.33 no.5
    • /
    • pp.1475-1479
    • /
    • 2012
  • Human peroxisome proliferator-activated receptor gamma ($hPPAR{\gamma}$) has been implicated in numerous pathologies, including obesity, diabetes, and cancer. In this study, we verified that amentoflavone is an agonist of $hPPAR{\gamma}$ and probed the molecular basis of its action. It was demonstrated that amentoflavone bound $hPPAR{\gamma}$ with high (picomolar) affinity and increased the binding between $hPPAR{\gamma}$ and steroid receptor coactivator-1 (SRC-1) by approximately 4-fold. Based on a docking study, for the first time, we propose a model of amentoflavone and $hPPAR{\gamma}$ binding in which amentoflavone forms three hydrogen bonds with the side chains of His323, Tyr327, and Arg280 in $hPPAR{\gamma}$ and participates in two hydrophobic interactions.

Human-like Whole Body Motion Generation of Humanoid Based on Simplified Human Model (단순인체모델 기반 휴머노이드의 인간형 전신동작 생성)

  • Kim, Chang-Hwan;Kim, Seung-Su;Ra, Syung-Kwon;You, Bum-Jae
    • The Journal of Korea Robotics Society
    • /
    • v.3 no.4
    • /
    • pp.287-299
    • /
    • 2008
  • People have expected a humanoid robot to move as naturally as a human being does. The natural movements of humanoid robot may provide people with safer physical services and communicate with persons through motions more correctly. This work presented a methodology to generate the natural motions for a humanoid robot, which are converted from human motion capture data. The methodology produces not only kinematically mapped motions but dynamically mapped ones. The kinematical mapping reflects the human-likeness in the converted motions, while the dynamical mapping could ensure the movement stability of whole body motions of a humanoid robot. The methodology consists of three processes: (a) Human modeling, (b) Kinematic mapping and (c) Dynamic mapping. The human modeling based on optimization gives the ZMP (Zero Moment Point) and COM (Center of Mass) time trajectories of an actor. Those trajectories are modified for a humanoid robot through the kinematic mapping. In addition to modifying the ZMP and COM trajectories, the lower body (pelvis and legs) motion of the actor is then scaled kinematically and converted to the motion available to the humanoid robot considering dynamical aspects. The KIST humanoid robot, Mahru, imitated a dancing motion to evaluate the methodology, showing the good agreement in the motion.

  • PDF

Effect Analysis of Surface-Icing on the UHF-band Antenna for Space Launch Vehicle (우주발사체용 UHF-대역 안테나의 표면결빙에 의한 영향분석)

  • Hwang, Soosul;Oh, Changyul;Ma, Keunsu
    • Journal of Satellite, Information and Communications
    • /
    • v.9 no.3
    • /
    • pp.104-108
    • /
    • 2014
  • This paper represents the effect analysis results of surface-Icing on the UHF-band antenna for Space Launch Vehicle. In order to obtain structural model of the surface-icing, Relative Permittivity of ice at $-180^{\circ}C$ was extracted. Using this surface-Icing model, UHF-band antenna simulation and comparative analysis about the antenna parameters such as resonance frequency, reflection loss and radiation pattern were performed for each case of with or without surface-icing. Simulation results show that resonance frequency is shifted out of operation frequency due to the additional ice permittivity. This resonance frequency changes cause severe affect to the antenna performance and its radiation pattern.

A Study on the Determination of the Removal Times of Form in Concrete Using Fly Ash Cement (플라이애시 시멘트를 사용한 콘크리트의 거푸집 존치기간 결정에 관한 연구)

  • Shin Byung-Cheol;Han Min-Cehol
    • Journal of Environmental Science International
    • /
    • v.15 no.2
    • /
    • pp.185-191
    • /
    • 2006
  • In this paper, removal time of side form from concrete using OPC(ordinary Portland cement) and FAC(fly ash cement) are proposed by appling logistic model, which evaluates the strength development of concrete with maturity. W/B, types of cement and curing temperatures are adapted as test parameters. The estimation of strength development by logistic model has a good agreement between calculated values and measured ones. As for the removal times of form works suggested in this paper, as W/8 increases, curing temperature decreases and fly ash is used, removal time of side form is prolonged. Removal time of form from concrete using OPC suggested in this paper is shorter $2.5\~3.5$ days than those of KASS-5 (Korean Architectural Standard Specifications-5) in the range of over $20^{\circ}C$. And in the range of $10\~20^{\circ}C$ removal time of form is shorter than that of KASS-5 by as much as $4\~4.5$ days. The use of FAC results in an increase in removal time of form compared to that of OPC by about 1 day.

A Study on the Representation of Ship Hull Forms Using NURBS Surface - The Development of a Free Form Cutting Machine ; Part I - (NURBS 곡면을 이용한 선형표현에 관한 연구 - 자유곡면 가공기계 개발(I) -)

  • H. Shin;K.W. Park;H.G. Park;I.H. Kim
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.37 no.2
    • /
    • pp.109-117
    • /
    • 2000
  • In order to develope ship hull forms. many various models are represented numerically in terms of B-spline surfaces and tested experimentally in the towing tank. It is very difficult to make various ship hulls with free forms in handiwork. As the first step of development of a free form cutting machine which becomes a good substitute for high-priced model cutting machines, free forms representation for model cutting are developed. In this paper, NURBUS surfaces are represented on the assumption that data points may be control points contrary to existing methods.

  • PDF

Demand Analysis of Factors of Teaching Competency for Character Education of Early Childhood Teachers (영유아교사의 인성교육 지도역량 요인에 대한 요구도 분석)

  • Goh, Eun Kyoung;Jeon, Hyo Jeong
    • Korean Journal of Childcare and Education
    • /
    • v.12 no.5
    • /
    • pp.47-69
    • /
    • 2016
  • The purpose of this study was to examine teaching competency for character education of early childhood teachers and their demands to improve their capacities. 152 kindergarten and child care teachers responded to 30 survey questionnaires, which included 3 sub-factors(commutative, practical, instrumental) of teaching competency for character education of the teachers, as well as 16 detailed components, designed to check their current competency for character education and to investigate the priority elements that they desired to improve. The data were analyzed based on the Borich request formula, the locus for focus model, and the independent sample t-test across the teacher groups. The results were as follows: Firstly, the most highly demanded teaching competency by the teachers was using tools interactively for character education. And the teachers, among the sub-elements, requested (a) recording and evaluating character education systematically, (b) using local or national resources, (c) planning member's participation, and (d) performing character education related activities systematically. Secondly, more new teachers demanded instrumental competency and answered the need of parents' participation among the sub-elements, more than the more experienced teachers, respectively. The study discussed the implications of promoting early childhood teachers' teaching competency for character education.

Evaluation of an Education Program for Public Health Service Workers in Public Hospitals: Learning Achievement and Satisfaction Levels (공공병원 공공보건의료사업 담당자를 위한 교육프로그램이 학습목표 성취도와 교육반응도에 미치는 효과)

  • Hwang, Eun-Jeong;Moon, Jung-Joo
    • Korean Journal of Health Education and Promotion
    • /
    • v.28 no.4
    • /
    • pp.27-37
    • /
    • 2011
  • Objectives: This study aims to evaluate the outcomes of an education program for public health service workers in public hospitals, utilizing the Kirkpatrick model. Methods: The study participants were 118 staff in 48 public hospitals. Of the stages in the Kirkpatrick model(reaction, learning, behavior, and result), reaction and learning stages were analyzed in this study. A 10-item self-evaluation questionnaire was used to measure satisfaction level for the reaction, and achievement of learning purposes for the learning. The education program consisted of general courses and special two tract courses(Tract A: chronic diseases, Tract B: health promotion). Results: The highest score for reaction was for Tract A(score=4.4), whilst the lowest score for reaction was for lecture(score=3.0). Learning achievement was significantly different between pre-education and post-education(p<0.01), except for health technicians. Conclusions: The results of this study could be utilized to develop effective systematic education programs for public health service workers in public hospitals.

Improved human hematopoietic reconstitution in HepaRG co-transplanted humanized NSG mice

  • Kim, Jin;Ryu, Bokyeong;Kim, Ukjin;Kim, Chang-Hwan;Hur, Gyeung-Haeng;Kim, C-Yoon;Park, Jae-Hak
    • BMB Reports
    • /
    • v.53 no.9
    • /
    • pp.466-471
    • /
    • 2020
  • Several humanized mouse models are being used to study humanspecific immune responses and diseases. However, the pivotal needs of fetal tissues for the humanized mice model have been huddled because of the demand for ethical and medical approval. Thus, we have verified the hematopoietic and immunomodulatory function of HepaRG and developed a new and easy humanized mouse model to replace the use of fetal liver tissue. HepaRG co-transplanted Hu-NSG mice significantly increased CD45+ lymphocytes and CD19+ B cells and CD3+ T cells than normal Hu-NSG, suggesting enhanced reconstitution of the human immune system. These results have improved the applicability of humanized mice by developing new models easily accessible.