• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.12
• /
• pp.769-776
• /
• 2016

In this study, a numerical simulation of a vanadium redox flow battery was investigated for reactions involving an electrochemical species using comprehensive conservation laws and a kinetic model. For a 3-D geometry of the cell, the distributions of electric potential, vanadium concentration, overpotential, and ohmic loss were calculated. The cell temperature and initial vanadium ion concentration were set as variables. The voltage and electrochemical loss were calculated for each variable. The effects of each variable's impact on the electrochemical performance of a vanadium redox flow battery was numerically analyzed using the calculated overpotential in the electrode and the ohmic loss in the electrolyte phase. The cell temperature increased from $20^{\circ}C$ to $80^{\circ}C$ when the voltage efficiency decreased from 89.34% to 87.29%. The voltage efficiency increased from 88.65% to 89.25% when the vanadium concentration was changed from $1500mol/m^3$ to $3000mol/m^3$.

• Journal of Life Science
• /
• v.18 no.2
• /
• pp.162-166
• /
• 2008

The production of heteropolysaccharide-7 (PS-7) by Beijerinckia indica (B. indica L3) was evaluated in shaker flask culture. The medium optimization was studied using response surface methodology (RSM). A five-level three-factor central composite design was employed to determine the maximum PS-7 yield at optimum levels for whey lactose, glucose and ammonium nitrate contents. The validity of the model could be determined by the regression coefficient, $R^2$. The values of $R^2$ were 0.72, 0.64 and 0.85 in PS-7, DCW and viscosity, respectively. The optimal medium combinations of whey lactose, glucose and ammonium nitrate concentrations on the PS-7 production were whey lactose (2%), glucose (1 %) and ammonium nitrate 5 mM, respectively. The result indicated that PS-7 production was affected significantly by the addition of glucose to whey lactose based on medium and C/N ratio.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.397-407
• /
• 2017

In this study, a SCR system is employed to selectively reduce $NO_X$, which is a major cause of environmental pollution and issues in diesel engines. In particular, this paper focuses on the combination of feedforward injection strategies, depending on the NO/$NO_X$ ratio, and feedback injection control, using $NH_3$ coverage ratio, based on a SCR model. A 2.2 L passenger diesel engine, which is equipped with a diesel oxidation catalyst (DOC) and a diesel particle filter (DPF), was used in the experiments. The developed control algorithm is implemented on a real-time computer with injection control algorithm. By analyzing the $NO_X$ emission measurement, the performance of the proposed injection control algorithm is verified.

• Current Research on Agriculture and Life Sciences
• /
• v.7
• /
• pp.67-71
• /
• 1989

To consider improvement effect of the bearing capacity and economical efficiency in using the geotextile, on foundation reinforced with the geotextile, several experiments accomplished by the plate-penetrometer on a model foundation. The results obtained are as follows : 1. It appears that the BCR is increased steeply only to 3 layers of the geotextile but nearly isn't more than 3 layers. 2. It appears that the BCR is increased during the U/D's increment but the variations of it nearly isn't more than U/D=0.8. 3. It appears that the BCR is increased steeply to the value of ${\Delta}Z/D$=0.6 but variations of it nearly isn't more than 0.6. 4. It appears that the BCR is decreased almost proportionally to the value of B/D= 2.5 but it's ratio of decrease is decreased remarkably more than 2.5.

• The Journal of Pediatrics of Korean Medicine
• /
• v.26 no.1
• /
• pp.1-15
• /
• 2012

$CheongGiGeoYangTang$ has been used for anti-allergenic purpose. However there was no experimental study about its effect. Therefore, this study was designed to investigate the anti-allergenic effect of $CheongGiGeoYangTang$. Methods Modifiability of RBL-2H3 mast cells' IL-4, IL-13 was analyzed by qRT-PCR and ELISA. Also, the suppressive effect of GATA-1, GATA-2, NF-AT1, NF-AT2, AP-1 and NF-${\kappa}B$ p65 transcription factors was observed by western blotting. OVA-specific IgE, IL-4 and IL-13 production in ovalbumin allergy model was examined as well. Results It was showed that the RBL-2H3 mast cells treated with $CheongGiGeoYangTang$ extract(CGGYT) was significantly suppressed mRNA expression, production of IL-4 and IL-13, and prominently inhibited the expression of transcription factors including GATA-1, GATA-2, NFAT-1, NFAT-2, c-Fos and NF-${\kappa}B$ p65 but not c-Jun. The administration of CGGYT was suppressed the amount of OVA-specific IgE, IL-4 and IL-13 in OVA/alum-sensitized mice. Conclusions We considered CGGYT would regulate the allergic inflammation as inhibition of IL-4 and IL-13 production in activated mast cells and Th2 cells.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.379-388
• /
• 1998

본 연구는 악안면보철용 실리콘의 색안정성을 연구하기 위하여 실리콘 재료로 MDX 4-4210 Silicone(Dow Coming. Midland, Mich.)과 A-2186(Factor II, Lakeside, Az)을 사용하고 Mars Violet. Golden Yellow, Red yellow, Raw Sienna등 4종의 색소(Factor II, Lakeside, Az)를 이용하여 시편을 제작한 후 1군은 섭씨5-55도에서 700회 thermocycling하였고, 2군은 10%의 비눗물(Ivory, Proctor & Gamble Inc,. Toronto, Ontario)에 담아 섭씨15-55도에서 700회 thermocycling하였다. 3군은 10%의 비눗물에 담아 75일간 실온에서 보관하였으며 4군은 실온의 암실에 75일간 보관하였다. 5군은 초여름인 6월 중순부터 75일간 햇볕이 잘드는 곳에 위치하였다. 이를 측색색차계(Model TC-6FX, Tokyo Denshoku Co., Japan)를 이용하여 측정하고 색변화를 연구한 결과 다음과 같은 결론을 얻었다. 1. $L^*$값의 경우 모든 실험군에서 대조군에 비해 유의하게 감소하였다. 2. $a^*$값의 경우 대부분의 실험군에서 증가하였으나 Raw sienna, Mars violet색소를 사용한 실험 3.4.5군의 MDX4-4210의 경우 감소하는 경향을 보였다. 3. $b^*$값은 실험1.2.3군의 경우 대부분 감소하였고 실험4.5.군의 경우에서 증가하였으나 3.4.5군의 경우에서 대부분 유의한 차이가 없었다. 4. ${\Delta}E$의 값은 실험군에서 대부분 감소하였으나 4군의 A-2186에서 증가하는 경향을 보였고 실험2군의 Red yellow, Mars violet을 사용한 MDX4-4210에서 비교적 큰 변화를 보였다. 5. $L^{\ast}$값과 a값의 변화량의 합은 A-2186의 경우에서 크게 나타났으나 ${\Delta}E$값의 변화량은 MDX4-4210에서 크게 나타났다. 6. $L^*$값의 변화량의 합은 실험4군에서 크게 나타났으며 $a^*$값은 1군에서, $b^*$값과 ${\Delta}E$값의 변화량의 합은 2군에서 크게 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.216-220
• /
• 2012

본 연구는 경기도 용인시에 위치한 공공하수처리장을 대상으로 소수력발전 성능특성을 예측하고 경제성을 분석하여 소수력발전소의 건설타당성을 제시하였다. 방류구에서의 수준측량 조사에 따르면 실제 유효 낙차는 4.3m로 나타났다. 최근 5년간 방류량 자료를 살펴보면 일평균 실제 처리량은 약 $30,000m^3/day$로 나타났으며, 우수 유입과 물 사용량이 증가하는 여름 및 가을에 처리량이 증가하였다. 설계유량은 유량변화에 따른 누적 확률밀도와 유량지속곡선에 근거해 산정하였으며, 시간빈도로 보았을 때 17%의 유량이 지속되는 $0.35m^3/sec$가 설계유량으로 나타났다. 예상되는 수차 발전용량은 11kW급이며, 시스템 가동율은 74%, 그리고 계통선에 송출될 수 있는 연 전력생산량은 71.3MWh로 나타났다. 경제성 평가는 신재생에너지 경제성 분석 도구인 RETScreen 프로그램을 사용하여 B/C ratio, IRR, 개발투자비 등의 경제성 평가지표들을 산정하였다. 편익(Benefit) 산정시 전력기준단가는 133.67원/kWh, 할인율 7%를 적용하였으며, 비용(Cost) 산정시 유지관리비는 초기 건설비의 1%, 사용연한 30년을 적용하였다. 경제성 분석결과 기흥레스피아의 소수력발전소 건설시 초기 건설공사비가 $165,000 일 때, B/C 1.0, NPV $3,534, 투자회수기간 15.1년으로 산정되었고 따라서 초기 건설비용이 $165,000 이하일 때 가장 경제적인 것으로 파악되었다.

• The Journal of Korean Medicine
• /
• v.23 no.1
• /
• pp.37-49
• /
• 2002

Objectives: Maekmoondong-tang and Jeongcheonhwadamgangki-tang are herbal decoctions which have been used as traditional therapeutic agents for asthma. This study was performed to investigate the effects of Maekmoondong-tang and Jeongcheonhwadamgangki-tang on immune Cell & serum OA-specific 19B in broncho-alveolar lavage fluid (BALF) in rat asthma model. Methods: Rats were sensitized with ovalbumin (OA); at day I the sensitized group and Maekmoondong-tang and Jeongcheonhwadamgangki-tang groups were systemically immunized by subcutaneous injection of 1mg OA and 300mg of $Al(OH)_3$ in a total volume of 2ml. At the same time, 1ml of 0.9% saline containing $6{\times}10^9$ B. pertussis bacilli was injected by i.p. for 14 days. After systemic immunization, the rats received local immunization by inhaling 0.9% saline aerosol containing 2% (wt/vol) OA. A day after local immunization, BAL fluid was collected from the rats. A day after local immunization, rats were orally administered with each of Maekmoondong-tang and Jeongcheonhwadamgangki-tang extract for 14 days. Lymphocyte, CD4+T-cell CD8+ T-cell counts, CD4+/CD8+ ratio in BALF, change of serum OA-specific IgE level, and CD4+T-cell CD8+T-cell percentage in the peripheral blood were measured and evaluated. Results: Maekmoondong-tang and Jeongcheonhwadamgangki-tang showed a suppressive effect on the rat asthma model. Maekmoondong-tang decreased total cell, lymphocyte, CD4+T-cell, CD8+T-cell in BALF, and serum OA specific 19B level as compared with the control group, whereas Maekmoondong-tang decreased CD4+/CD8+ ratio in BALF with statistical nonsignificance as compared with the control group. 1 decreased total cell, CD4+T-cell, CD4+/CD8+ ratio in BALF, and serum OA specific IgE level, whereas Jeongcheonhwadamgangki-tang decreased ymphocyte, and CD8+T-cell in BALF with statistical nonsignificance as compared with the control group. CD4+T-cell and CD8+ T-cell percentage in peripheral blood were not changed significantly in all the experimental groups. Conclusions: This study shows that Maekmoondong-tang and Jeongcheonhwadamgangki-tang have a suppressive effect on asthma. Maekmooruiong-tang and Jeongcheonhwadamgangki-tang would be useful asthma treatment agents.

• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.164-168
• /
• 2024

(La_0.7Sr_0.3)(Mn_1-xFe_x)O₃ (LSMFO) (x = 0.03, 0.06, 0.09, 0.12) precursor solution are prepared by sol-gel method. LSMFO thin films are fabricated by the spin-coating method on Pt/Ti/SiO₂/Si substrate, and the sintering temperature and time are 800℃ and 1 hr, respectively. The average thickness of the 6-times coated LSMFO films is about 181 to 190 nm and average grain size is about 18 to 20 nm. As the amount of Fe added in the LSMFO thin film increased, the resistivity decreased, and the TCR and B_25/65-value increased. Electrical resistivity, TCR and B_25/65-value of the (La_0.7Sr_0.3)(Mn_0.88Fe_0.12)O₃ thin film are 0.0136 mΩ-cm, 0.358%/℃, and 328 K at room temperature, respectively. The resistivity properties of LSMFO thin films matched well with Mott's VRH model.