• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.272-278
• /
• 1995

In this paper to investigate mode I and mode II critical energy release rates, G sub(IC) and G sub(IIC), three prepregs which are domestic products are used. Those are used for the unidirectional composites, but only one is used for the cross-ply laminate composites which is molded [0/90] sub(6s), [0/45] sub(6s) and [0/45/90] sub(6s). The value of G sub(IC) is almost same when modified three calculating methods are applied. The highest value of G sub(IC) at crack initiation is obtained at the [0/90] sub(6s) interlaminar and the lowest one is at the [0/45/90] sub(6s) interlaminar.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.45-51
• /
• 2018

The generation mechanism of NAR is not yet understood. In the present study, an in-depth analysis of the computational results previously obtained by the authors is conducted to investigate the flow mechanism responsible for NAR. A theoretical analysis has also been performed to understand the gas dynamic features during transition from scramjet to ramjet mode. It is known that there exists a critical value of the fuel equivalence ratio at which the flow states at the inlet of isolator remain unchanged. An increase in the equivalence ratio over the critical value leads to a sudden change in the static pressure and the Mach number at the inlet of the isolator, which is responsible for the generation of NAR.

• Cross-Cultural Studies
• /
• v.27
• /
• pp.167-195
• /
• 2012

A Chinese female writer Linhaiyin(林海音) and Chengnanjiushi(城南舊事), her representative work, have never been studied in Korea before although she and her literary works stand high and are well known in the history of the modern Chinese literature. Thus, in this paper, I analyze her and her novels included in Chengnanjiushi and study their literary value and meaning. To analyze and study them, I mainly consider novels Anhuiguan, Womenkanhaiqu, Lanyiniang, $L{\acute{\ddot{u}}}dagunr$, and Babadehuarluole included in Chengnanjiushi. Firstly, I look into her attitude and mode to observe children and women's life as a writer. Such attitude and mode succeeded to the spirit of the '5.4 literature'. Secondly, I evaluate Linhaiyin's 'Both sides complex' and its value in the history of literature. From this evaluation, the meaning of Linhaiyin's literature is highlighted. She was free from 'Both sides complex' occurred due to the circumstance of the times and played a role of a bridge so as not to break off literature of China and Taiwan. When her and her works are evaluated, this is one of the most important values. The characteristic of her writing mode is that she did not seek a compelling climax, a surprising reversal, or an exclusive plot or character in her works. In her works, plain description or unwitting conversation and story often imply deep meanings. Thus, at unexpected moment after reading her novels, readers truly listen to deep resonance for her attitude and mode to observe people's life. This is exactly her potential energy that makes readers sink into her literary world regardless of time and space.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.11-19
• /
• 2006

The recent video coding standard H.264 employs the rate-distortion optimization (RDO) method for choosing the best coding mode; however, it causes a large amount of encoding time. Thus, in order to reduce the encoding time, we need a fast mode decision algorithm. In this paper, we propose a fast inter mode decision algorithm considering quantization parameter (QP). The occurrence of best modes depends on QP. In order to reflect these characteristics, we consider the coded block pattern (CBP) which has 0 value when all quantized discrete cosine transform (DCT) coefficients are zero. We also use the early SKIP mode decision and early $16{\times}16$ mode decision methods. By computer simulations, we have verified that the proposed algorithm requires less encoding time than the fast inter mode decision method of the H.264 reference software for the Baseline and Main profiles by 19.6% and 18.8%, respectively.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.291-298
• /
• 2016

The aim of the study was to investigate the diagnostic value of the color Doppler twinkling artifact in disease of urinary system. The intensity of twinkling artifact(TA) with color Doppler was classified into 3 levels, 0(non-TA) to 3(distinct TA). In the in vitro study, acorn jelly with various materials on top was examined using color Doppler at B-mode sonography in a water bath for TA. 31 patients with diagnosis of urinary calculi(renal stones 16, urinary stones 15) based on B-mode sonography were studied in vivo for TA. The materials with rough surfaces such as salt, screw and cubics at B-mode sonography with color Doppler contributed to causing TA. At B-mode sonography without color Doppler 37% of renal stones and 60% of ureter stones were detected. but at B-mode sonography with color Doppler TA was demonstrated for all cases. Superficial roughness of materials affected occurrence of TA at B-mode sonography with color Doppler. Therefore, TA at B-mode sonography without color Doppler could play a role in confident diagnosis of the disease of urinary system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.668-674
• /
• 2001

An experimental study was performed for two types of co-axial cylindrical shell structures in order to establish the relationship between in-air dynamic characteristics and in-water ones and to observe hydrodynamic mass effects on their mode shapes when submerged. The outer cylinders are prepared with two kinds to get more insights on the fluid-structure interaction phenomena: one is flexible, which means that the outer cylinder has almost same stiffness as the inner one, and the other is a rigid one whose stiffness is more than ten times of the inner one's(it might be regarded as the scaled-down model of the reactor internals). The finite element. analyses were also implemented to support the experimental results. The results show that the natural frequencies of a co-axial cylindrical shell structure in water are remarkably lower than those in air due to the fluid mass effects. In case of the flexible-to-flexible cylinders, there exist in-phase and out-of-phase mode shapes and they are affected by the annular gap between the. co-axial cylinders. For the in-phase mode the in-water natural frequency decreases exponentially as the gap increases, while it slightly increases in case of the out-of-phase mode due to the squeezing effect of the gap fluid. In the flexible-to-rigid case, the normalized natural frequency(in-water frequency/in-air one) of the inner cylinder(core barrel model) ranges between in-phase and out-of-phase mode frequencies of the flexible-to-flexible co-axial cylindrical structure having identical dimensions. Also the normalized natural frequency of the inner cylinder of the flexible-to-rigid one moves from near of the in-phase mode frequency into the out-of-phase mode value of the flexible-to-flexible case as circumferential mode number(n) increases.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.243-246
• /
• 2008

This thesis suggests block cipher operating mode using ASR(Arithmetic Shift Register). ASR is ratted arithmetic shift register which is sequence that is not 0 but initial value $A_0$ multiplies not 0 or 1 but free number D on $GF(2^n)$. This thesis proposes ASR mode which changes output multiplying d and Floating ASR mode which has same function but having strengthened stability altering d. If we use ASR's output as a counter, there's advantage that it has higher stability and better speed than CTR. Also, ASR mode and FASR mode have advantage of Random access which is not being functioned on CTR mode, they can be widely used to any part which Random access is needed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.6
• /
• pp.488-493
• /
• 2014

This paper presents a carrier-based pulse-width modulation(PWM) method for reducing the common-mode voltage of a three-level four-leg converter. The idea of the proposed PWM method is intuitive and easy to be implemented in digital signal processor-based converter control systems. On the basis of the analysis of space-vector PWM(SVPWM) and sinusoidal PWM(SPWM) switching patterns, the fourth leg pole voltage of the three-phase converter called "f leg pole voltage" is manipulated to reduce the common-mode voltage. To synthesize f leg pole voltage for the suppression of the common-mode voltage, positive and negative pole voltage references of f leg are calculated. An offset voltage is also deduced to prevent the distortion of a, b, and c phase voltages. The feasibility of the proposed PWM method is verified by simulation and experimental results. The common-mode voltage of the proposed PWM method in peak-to-peak value is 33% in comparison with that of the conventional SVPWM method. The transition number of the common-mode voltage is also reduced to 25%.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.231-238
• /
• 2023

For boost PFC (Power Factor Correction) converters, various control methods are being studied to achieve unity power factor and low THD (Total Harmonic Distortion) of AC input current. Among them, average current mode control, which controls the average value of the inductor current to follow the current reference, is the most widely used. However, nowadays, as advanced digital control becomes possible with the development of digital processors, predictive control of boost PFC converters is receiving attention. Predictive control is classified into predictive current mode control, which generates duty in advance using a predictive algorithm, and model predictive current control, which performs switching operations by selecting a cost function based on a model. Therefore, this paper simply explains the average current mode control, predictive current mode control, and model predictive current control of the boost PFC converter. In addition, current control under entire load and disturbance conditions is compared and analyzed through simulation.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.59-70
• /
• 2012

The relative importance of leisure trip has been increased after adopting the five-day workweek system and considering the higher income level. Thus, the value of travel time for intercity leisure trips should be estimated to conduct a reasonable benefit/cost analysis for railway construction projects. In this paper, the value of travel time was estimated separately for each trip purpose such as business, leisure, and other non-business than leisure. The estimated values of leisure travel time ranged from 5,310 to 14,185 (won/hr) by altering travel mode, and were increased by 42-107% when comparing with those of non-business travel time. Besides, how to apply the value of intercity leisure travel time for B/C analysis of railway projects was suggested. For the construction case of a railway connecting Chuncheon and Sokcho, the estimated benefit was increased by 2.3%.