• 전자공학회논문지A
• /
• 제30A권11호
• /
• pp.80-87
• /
• 1993

In this paper, the fields of double-plane steps in rectangular waveduides are analyzed using the modified TE$_{mn}$$^{x}$ mode-matching method. The characteristics of rectangular waveguide having double-plane steps are investigated with accomdating the effects of higher-order modes generated by discontinuities. In comparison with the generalized TE$_{mn}$-TM$_{mn}$ mode analysis, the modified TE$_{mn}$$^{x}$ mode-matching method consumes less memory and CPU time and provides improved convergence behavior. The results obtained in this manner coinside with that of the TE$_{mn}$-TM$_{mn}$ mode-matching method.

• 전자공학회논문지D
• /
• 제34D권10호
• /
• pp.53-59
• /
• 1997

In this paper, we present a 20 GHz low-loss dual-mode channel filter designed by using mode matching method. The performance of dual-mode channel filter mainly depends on iris characteristics. Therefore the exact design of iris is the key point to get good frequncy response of the filter. MOde matching technique is widely used ot design several kinds of waveguide filters because it is simple in theory and can easily calculate the scattering matrices at the discontinuities with simple structure like iris coupled filters. Additionally the effect for finite thickness of the iris in the dual-mode cavity iflter is analyzed by te full-wave method, providing the exact filter implementation without trial and error.

• 한국통신학회논문지
• /
• 제24권6B호
• /
• pp.1123-1133
• /
• 1999

본 논문에서는 되파관 T-접합을 해석하기 위해서 모드매칭법과 일반산란행렬법을 조합하여 Three Plane Mode Matching Method에 적용하였다. Liang이 제안한 방법에서는 아홉 번의 계산으로 전체 산란행렬을 구했으나 본 논문에서는 해석 시 단락면의 위치에 따른 세 번만의 계산을 통하여 전체 산란행렬을 구할 수 있었고 입사 시에도 여러 모드를 고려하였다. 이러한 해석 방법을 통해서 불연속으로 이루어진 여러 가지 도파관 구조를 보다 편리하고 정확하게 해석할 수 있으며 이를 입증하기 위하여 T-접합의 구조를 계단형으로 설계하여 측정한 결과 입력단에서는 반사를 줄일 수 있었으며 또한 보다 넓은 대역에서 사용할 수 있었다. 계산된 결과는 FEM을 이용한 상용 소프트웨어인 HFSS(High Frequency Structure Simulator)에 의한 결과와 잘 일치함을 보였다. 그리고 계단의 수, 높이, 길이 및 위치에 대한 특성을 고찰하였다.

• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1337-1342
• /
• 2012

본 논문에서는 RF 스위치 역할을 하는 핀-다이오드를 이용하여 정합 회로의 형상을 변경하는 새로운 형태의 재구성 안테나를 제안하였다. 개발된 안테나는 HSDPA 대역(2.1~2.2 GHz), WiBro WiFi 대역(2.3~2.5 GHz)에서 Mode 1과 Mode 2의 두 가지 모드로 동작할 수 있도록 하였으며, polyarcylate 기판의 양면을 이용하여 제작 및 측정을 하였다. 측정 결과, Mode 1과 Mode 2의 동작 주파수에서 547 MHz($S_{11}$ <-3 dB, 2.035~2.582 GHz), 600 MHz($S_{11}$ <-3 dB, 2.2~2.8 GHz)의 대역폭을 보였으며, 각각 -4.4 dBi, -4.5 dBi의 x-y 평면 평균 수직 복사 성능을 보였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.79-83
• /
• 2003

Multi-port($2{\times}2$port, 1port) rectangular waveguide discontinuity problem has been analyzed by use of $TE^x_{mn}$ (mono)mode matching method. Matrix size can be reduced significantly in comparison with $TE_{mn}&TM_{mn}$(full-wave)mode matching method. the present results is compared with those by CST MicroWave Studio to validate the presint method.

• Journal of Multimedia Information System
• /
• 제5권2호
• /
• pp.143-146
• /
• 2018

The eigen value problem of a coaxial cavity and a modified pill box cavity is investigated using the mode matching technique. The coaxial cavity has a cylindrical cavity with beam ports and center conductor. The pill box cavity is the same as a coaxial cavity without center conductor. The electric field and magnetic field are formulated in propagation region and resonance region. The boundary and orthogonal conditions are applied to the electric and magnetic fields. We derived the eigen value equation by the proposed procedure in a coaxial cavity and a modified pill box cavity. The electromagnetic field of the real structure is disturbed by the coaxial wire. The effect of the coaxial wire in pill box cavity with beam ports increase the dominant resonant frequency. The coaxial line method of the coupling impedance is not adequate for a cylindrical cavity. The results of the mode matching technique and simulation agree well. The results confirm the proposed formulation is valid.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3314-3318
• /
• 2021

This paper presents a mode-matching analysis of the electromagnetic coupling between open cable trays in an indoor structure when an electric-line current is generated as an electromagnetic source. We validated the mode-matching method by comparing the mode-matching results with those computed from a commercial electromagnetic simulator and then investigated the strength of the electric-field coupled in a victim cable tray while varying the distances between cable trays and architectural surfaces. The results of this study provide geometrical information on the placement of open cable trays to avoid electromagnetic interference problems.

• 한국음향학회지
• /
• 제19권1호
• /
• pp.54-60
• /
• 2000

고차모드를 고려하여 단순확장관을 해석한 많은 선행연구가 이루어 졌고, 이러한 연구는 모드적합법, 속도포텐셜법, 유한요소법으로 분류할 수 있다. 이들 중 모드적합법은 동심관형확장관을 해석하는 데 유용하다. 일반적으로 입·출구의 단면적이 중간확장관의 단면적보다 작으므로 입·출구에 고려하는 고차모드의 개수는 중간확장관에 고려하는 고차모드의 개수보다 작을 수 있다. 그러나 모드적합법은 입·출구와 중간확장관에 같은 개수의 고차모드를 사용하여야 한다. 그래서 입·출구에 불필요한 고차모드를 포함하게 되어 계산시간을 늘이는 결과를 초래한다. 본 논문에서는 입구, 중간확장관 그리고 출구에 각각 임의의 고차모드의 개수를 선택할 수 있는 새로운 방법을 제시하였다. 그리고 이 방법의 정확성을 검증하기 위하여 전통적인 모드적합법, 유한요소법과 비교하였고, 이 새로운 방법이 계산시간을 줄일 수 있다는 것을 보였다.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1314-1322
• /
• 2000

The acoustic property of reactive type single expansion chamber can be analyzed by traditional plane wave theory. This theory can be applied in low frequency range and has good performance. But this theory can't include higher order modes, therefore another method is essential to analyze acoustic filter in high frequency range. Many researcher suggested the method that can concern higher order modes, and their methods are using mode matching technique. But there is no method that can be applied to the analysis of single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber. In this paper, the method which can analyze single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber using fundamental mode matching technique, was suggested and the predictions by this method was compared with those by the finite element method, and the influence of inlet/outlet location to acoustic performance of single expansion chamber is investigated and explained by higher order mode effects.

• 소음진동
• /
• 제9권2호
• /
• pp.340-347
• /
• 1999

The acoustic performance of reactive type single expansion chamber can be calculated theoretically by plane wave theory. But higher order model should be considered to widen the frequency range. Mode matching method has been developed to consider higher order modes, but very complicated algebra should be used. Munjal suggested a numerical collocation method, which can overcome the shortcomings of mode matching method, using the compatibility conditions for acoustic pressure and particle velocity at the junctions of area discontinuities. But the restriction of Munjal's method is that the ratio between the area of inlet(or outlet) pipe and that of chamber must be natural number. In this paper, the new method was suggested to overcome the shortcomings of Munjal's method. The predictions by this method was also compared with those by the finite element method and Munjal's method in order to demonstrate the accuracy of the modified method presented here.