• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.73-88
• /
• 2014

Vibration characteristics of columns are influenced by their axial loads. Numerous methods have been developed to quantify axial load and deformation in individual columns based on their natural frequencies. However, these methods cannot be applied to columns in a structural framing system as the natural frequency is a global parameter of the entire framing system. This paper presents an innovative method to quantify axial deformations of columns in a structural framing system using its vibration characteristics, incorporating the influence of load tributary areas, boundary conditions and load migration among the columns.

• Structural Engineering and Mechanics
• /
• v.39 no.4
• /
• pp.449-463
• /
• 2011

A free vibration analysis is made of a moderately-thick toroidal shell based on a shear deformation (Timoshenko-Mindlin) shell theory. This work represents an extension of earlier work by the authors which was based on a thin (Kirchoff-Love) shell theory. The analysis uses a modal approach in the circumferential direction, and numerical results are found using the differential quadrature method (DQM). The analysis is first developed for a shell of revolution of arbitrary meridian, and then specialized to a complete circular toroidal shell. A second analysis, based on the three-dimensional theory of elasticity, is presented to cover thick shells. The shear deformation theory is validated by comparing calculated results with previously published results for fifteen cases, found using thin shell theory, moderately-thick shell theory, and the theory of elasticity. Consistent agreement is observed in the comparison of different results. New frequency results are then given for moderately-thick and thick toroidal shells, considered to be completely free. The results indicate the usefulness of the shear deformation theory in determining natural frequencies for toroidal shells.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.813-825
• /
• 2014

To maximize electric power production using wave energy extractions from resonance power buoys, the maximum motion displacement spectra of the buoys can primarily be obtained under a given wave condition. In this study, wave spectra observed in shoaling water were formulated. Target resonance frequencies were established from the arithmetic means of modal frequency bands and the peak frequencies. The motion characteristics of the circular cylindrical power buoys with corresponding drafts were then calculated using numerical models without considering PTO damping force. Results showed that the heave motions of the power buoys in shoaling waters with insufficient drafts produced greater amplification effects than those in deep seas with sufficient drafts.

• 연구논문집
• /
• s.28
• /
• pp.13-20
• /
• 1998

The power steering pump bracket for a passenger car which is mounted on the engine block plays a role to support the inertia forces of the pump and the reaction forces of the belt assembly. The existing bracket which is made of FCD material has some demerits such as heavy weight, lower productivity and lower reliability. Recently, AI alloy bracket has been investigated to overcome these demerits. In this study, Stress analysis and modal analysis for a existing FCD bracket and two type of AI alloy brackets were performed, and strength and natural frequency of them were estimated by using finite element method to accomplish the weight reduction. As a result, the modified shape of AI alloy bracket is proposed, and it has achieved the 45% weight reduction and the improvement of its strength and vibration characteristics.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.2
• /
• pp.149-159
• /
• 1999

본 연구에서는 고유진동수를 사용하여 균열의 위치와 크기를 발견하는 비파괴 균열발견모델을 유도하고 Euler-Bernoulli 보를 대상으로 이 모델의 적합성을 검증하였다. 먼저, 균열위치예측모델과 균열크기예측모델로 이루어진 균열발견체계를 제시하였는데, 균열위치예측모델은 모드민감도와 고유진동수 사이의 선형적인 관계로부터 간접적으로 유도되었으며 균열크기예측모델은 균열발생에 의한 변형에너지의 손실을 진동특성치의 변화와 비교하는 동적 파괴역학적 방법으로부터 유도되었다. 다음으로, 기존에 발표된 양단-자유보에 대한 진동모드 실험결과를 사용하여 균열위치와 균열크기를 예측하고 평가하므로 균열발견모델의 적합성과 적용성을 실험적으로 검토하였다. 대부분의 손상시나리오에서 균열위치와 균열크기 예측치는 실제값과 근사하게 일치하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2268-2278
• /
• 1992

The vibratory modal for the face milling operation is assumed as a multi degrees of freedom system. The parameters of the system are determined based on the cutting experiment. From the relative displacements of this system the dynamic cutting forces were derived and simulated by the double modulation principle. The simulated cutting forces and measured cutting forces have a good agreement in time and frequency domains.

• Journal of KSNVE
• /
• v.4 no.2
• /
• pp.137-146
• /
• 1994

An analytical method for linear free vibration of fully liquid-filled circular cylindrical shell with various boundary conditions is developed by the Fourier series expansion based on the Stokes' transformation. A set of modal displacement functions and their derivatives of a circular cylindrical shell is substituted into the Sanders' shell equations in order to explicitily represent the Fourier coefficients as functions of the end point displacements, forces, and moments. For the vibration relevant to the liquid motion, the velocity potential of liquid is assumed as a sum of linear combination of suitable harmonic functions in the axial directions. The unknown parameter of the velocity potential is selected to satisfy the boundary condition along the wetted shell surface. An explicit expression of the natural frequency equation can be obtained for any kind of classical boundary conditions. The natural frequencies of the liquid-filled cylindrical shells with the clamped-free, the clamped-clamped, and the simply supported-simply supported boundary conditions examined in the previous works, are obtained by the analytical method. The results are compared with the previous works, and excellent agreement is found for the natural frequencies of the shells.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.797-801
• /
• 2003

The Statistical Energy Analysis is based on the power flow and the energy conservation between sub-systems, which enable the prediction of acoustic and structural vibration behavior in mid-high frequency ranges. This paper discusses the identification of SEA coupling loss factor parameters from experimental measurements of small reverberation chamber sound pressure levels and structural accelerations. As structural subsystems, steel plates with and without damping treatment are considered. Calculated CLFs were verified by both transmission loss values for air-borne CLF case and running SEA commercial software As a result, CLFs have shown a good agreement with those computed by software. Acoustical behavior of air-borne noise and structure-borne noise has been examined. which shows reasonable results, too.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.269-274
• /
• 2003

Vibration table is required to obtain high packing density in expendable pattern casting process. Packing density, which is an important manufacture factor, depends on the vibration pattern induced by vibration table. Modal test is utilized to identify the dynamic characteristics of vibration table. And finite element method is used to modify flask by fixing the stiffener. The positions of stiffener to modify are found and the natural frequency could be easily shifted to the objective value by using sensitivity analysis.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.125-130
• /
• 2000

Heat dissipation technology using flow resonant phenomenon is a kind of new concept in heat transfer area. A vibration exciter is needed to generate air turbulence which has the natural shedding frequency of heat system. A mechanical vibrating device for the air flow oscillation is introduced, which is driven by a moving coil actuator. An analytical dynamic model for this mechanical vibration exciter is presented and its validity is verified by the comparison with experimental data. Values of some unknown system parameters in the analytic model are estimated through the system identification approach. Based on this mathematical model, a high bandwidth vibration phase, it turns out the high modal resonant characteristics of vibrating plate are the major barrier against obtaining a high bandwidth vibration exciter.