• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.635-636
• /
• 2011

• 대한교통학회지
• /
• 제17권2호
• /
• pp.163-178
• /
• 1999

교통분야에서 이용되는 최단경로 알고리듬은 분할탐색 기법에 기초를 두고 있다. 분할탐색 기법이란 기점으로부터 일정 영역을 분할하여 경로를 탐색, 종점가지의 경로를 구축하는 방법으로써 수형망(Tree Building)알고리듬이나 덩굴망(Vine Building) 알고리듬 등이 여기에 속한다. 그러나 이러한 분할탐색기법의 경우 교통망내에서 복수 수단간의 환승비용이 고려될 경우나 동적 최단경로를 탐색하는 경우에는 교통망을 확장하지 않으면 기종점간의 올바른 최단경로를 찾을 수 없다는 문제점을 가지고 있다. 이러한 문제를 본 연구에서는 탐색 영역 문제(Searching Area Problem)라고 정의하였다. 본 연구에서는 탐색영역문제를 교통망 확장없이 해결할 수 있는 전역 탐색기법으로 유전 알고리듬을 이용하여 개발하였다.

• 소음진동
• /
• 제10권5호
• /
• pp.843-848
• /
• 2000

BEA(Boundary Element Analysis) based on Kirchhoff-Helmholtz integral equation is widely used in the prediction of sound radiation problems of vibrating structures. Accurate estimation of sound pressure distribution by BEA can be [possible if and only if dynamic behavior of the relating structure was described correctly. Another plausible method of sound radiation phenomena could be the NAH(Nearfield Acoustic Holography) method. NAH also based on the identical governing equation with BEA could be one of the best acoustic imaging schemes but it has disadvantages of the complexity of measurement and of the need of large amount of measuring points. In this paper, modal expansion method is presented for taking accurate dynamic data of the structures efficiently. This method makes use of vibration principle an arbitrary dynamic behavior of the structure is described by the summation of that structures mode shapes which can be calculated by FEA easily and accurately. Sound pressure field from a vibration flat plate is calculated using the combination of vibration signal on that flat plate from experiment, and of the natural mode shapes form FEA. When sound pressure field from vibration signal is calculated the importance of the phase information was emphasized.

• 한국소음진동공학회논문집
• /
• 제17권7호
• /
• pp.596-604
• /
• 2007

이 논문은 후판 환형 디스크의 기하학적인 형상이 래디얼 방향 진동에 의해 방사되는 소음에 미치는 영향을 연구하였다. 디스크의 내경을 고정한 상태에서 두께와 외경을 주어진 범위내에서 변경하면서 이론적인 해를 이용하여 래디얼 모드의 고유진동수와 진동모드의 변화를 검토하였다. 이 결과를 이용하여, 해당 형상을 가진 디스크의 래디얼 방향 고유진동에 의해 발생되는 원격음장, 음향파워 및 방사효율을 계산하였다. 이 결과로부터 고유진동에 의한 음향파워와 방사효율을 최소화할 수 있는 기하학적인 형상을 선택하였다. 마지막으로, 최적화된 디스크의 임의 위치에 단위 하모닉 가진을 가했을 경우에 발생되는 음향파워 및 방사효율 스펙트럼을 구하였으며, 전산해석을 통해 그 정확성을 검증하였다. 이 논문에 소개된 방법을 적용하면 주어진 제한 조건을 만족하면서 목표 주파수 범위내에서 래디얼 진동에 의해 발생되는 소음을 최소화할 수 있는 기하학적인 형상을 간편하고 논리적으로 구할 수 있다.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1083-1090
• /
• 2004

Two noise reduction systems are proposed in order to overcome the geometric restriction of the reactive muffler such as an expansion chamber. First, membrane is installed as a part of a duct wall and an air cavity is covered outside membrane. Second, membrane is installed inside a duct, which gives no volume change of the duct. Structural-acoustic coupling between membrane and fluid inside the cavity and duct causes rapid impedance mismatching and thereby reflected wave. Theoretical prediction is conducted by using modal expansion approach. The results are compared with the experimental results, which show better noise reduction performance than an expansion chamber.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.474-479
• /
• 2004

Two noise reduction systems are proposed in order to overcome the geometric restriction of the reactive muffler such as an expansion chamber. First, membrane is installed as a part of a duct wall and an air cavity is covered outside membrane. Second, membrane is installed inside a duct, which gives no volume change of the duct. Structural-acoustic coupling between membrane and fluid inside the cavity and duct causes rapid impedance mismatching and thereby reflected wave. Theoretical prediction is conducted by using modal expansion approach. The results are compared with the experimental results, which show better noise reduction performance than an expansion chamber.

• Nuclear Engineering and Technology
• /
• 제22권4호
• /
• pp.371-379
• /
• 1990

제논의 공간적인 진동은 원자로의 운전에 지장을 초래할 수 있다. 본 연구에서는 가압경수로에서의 제논에 의한 불안정성을 분석하기 위하여, 보다 일반적이고 다중입력/다중출력 계통에 적합한 일반화된 Nyquist조건을 사용하는 진동수위주의 기술을 적용하였다. 또한 모드전개 방법에 의하여 선형화된 중성자속을 구했다. 이 모형으로 출력 준위, 제어봉 위치, 그리고 평균 노심 연소도둥의 노물리 변수의 변화에 따른 영광 1호기의 제논에 대한 축방향 안정성을 조사하였다. 결과로는, 출력 준위의 증가나 제어봉 삽입의 증가는 안정성을 저해하는 효과를 가져오고, 연소도가 증가할 수록 불안정한 것으로 나타났다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.213-217
• /
• 2004

Laboratory scale study for an area of influence and flowing aspect of groundwater saturated zone was conducted for three sediment grains. On the AMG(Average Modal diameter Grains) 0.34, 1.38, 3.89mm diameter samples, the affected area of the aquifer were 15.2, 37.0, 30.0%/m2 each. Air flow for AMG 0.34mm diameter grain size provides indication of pattern of channelized air flow in saturated zone and expansion state in above saturated zone. For AMG of 1.38, 3.89mm diameter grains, air flow are pervasive air flow, forming a symmetrical cone of influence around the injection point. And also AMG 1.38, 3.89mm diameter samples show onset of collapse and approach to steady state in above saturated zone, respectively. In this study, optimal sites for in situ air sparging, may be grain diameters between about AMC 1.5～2.5mm diameter.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.498-504
• /
• 2002

Vibration beat phenomenon is theoretically investigated on a slightly asymmetric cylindrical shell, which is a simplified model of Korean bell. Mode pairs of the slightly asymmetric shell are obtained by receptance analysis and impulse response of the shell is derived using modal expansion and Laplace transform. Based on the impulse response model, beat mapping method is proposed to explain the reason that the beat of a bell vibration shows periodic distribution on the circumference. Beat characteristics of King Song-Dok Bell are explained in detail using the beat map and the measured modal data.

• Structural Engineering and Mechanics
• /
• 제46권3호
• /
• pp.371-385
• /
• 2013

Vibration isolators and anti-vibration mounts are ideal, for example, in creating floating floors for gymnasiums, or performance spaces. However, it is well-known that there are great difficulties on isolating vibration transmission in structural steel components, especially steel floors. Besides, the selection of inertia blocks, which are usually used by engineers as an effective vibration control measure, is usually based on crude methods or the experience of the engineers. Thus, no simple method or indices have been available for assessing the effect of inertia blocks on vibration isolation or stability of vibratory systems. Thus, the aims of this research are to provide further background description using a FE model and present and implement a modal approach, that was validated experimentally, the latter assisting in providing improved understanding of the vibration transmission phenomenon in steel buildings excited by a velocity-source type of excitation. A better visualization of the mean-square velocity distribution in the frequency domain is presented using the concept of modal expansion. Finally, the variation of the mean-square velocity with frequency, whilst varying mass and/or stiffness of the coupled system, is presented.